Buying a quality, low-pressure inflatable boat is just the first step towards full water comfort. The basic equipment often lacks the elements that make a simple inflatable boat a functional fishing boat or a reliable pleasure boat. supplementary allows you to unlock the full potential of the design of NDND, ensuring safety and ease of management.
The boating market offers hundreds of solutions, from simple remixes to complex electronic navigation systems. It is easy for a beginner to get confused with the variety of brands and specifications, buying unnecessary things or, conversely, forgetting about critical little things. accessories It is required for owners of inflatable floor boats for various scenarios of operation.
Protection of the hull and extension of service life
The low pressure inflatable floor (LDPB) is highly fluid, but the PVC material is vulnerable to mechanical damage. Rocks, snags and a shell on the shore pose a serious threat to the integrity of the cylinders. shield-belt And the keels that take the brunt of it.
Special attention should be paid to protecting the nose and transom. Many experienced water-engines install additional protector This is especially true for those who often pull the boat on unequipped shores.
- 🛡️ Keel ribbon - protects the bottom from abrasion on the sand and stones when mooring.
- 🛡️ Nasal awning - protects the cockpit from splashes, sun and debris during the course.
- 🛡️ transom pads - prevent damage to the engine fastening zone.
⚠️ Attention: Using aggressive chemicals to clean protective tapes can lead to the stratification of PVC material. Use only specialized means for the care of inflatable vessels.
Before installing additional protective tapes, degrease the surface with an alcohol solution, but do not use acetone or gasoline, which can damage the PVC structure.
transom wheels: necessity or luxury?
One of the most popular improvements is the installation of transom wheels. For heavy boats longer than 3 meters, especially assembled with an outboard motor, this is not just a convenience, but a convenience. necessityDragging such a structure alone is physically difficult, and sometimes impossible, without the risk of back injury.
Wheel design can be foldable or removable. Foldable models are more convenient to use because they don't require dismantling before getting on the water. However, they create additional sailing and can interfere with fishing in the thickets. Removable versions are smaller, but take time to install each time.
When choosing, pay attention to the diameter of the wheels and the material of the bearings. Larger wheels pass better through sand and grass, and stainless bearings will provide a long life in constant humidity.
☑️ Choice of transom wheels
Anchoring equipment and fixation systems
Without a reliable anchor, fishing on the current or in windy weather turns into chaos. For PVC NDND boats, the weight of the anchor is critical: too heavy can damage the cylinders when lifting, and a light one will not hold the vessel. Halla. and sailor.
Not only is it an anchor, but it's also a proper anchor organization, and using a buoy-float anchor end allows you to uncoup a stuck anchor without going to the hook. anchor-roller on the bow so that the rope does not rub the side.
The anchor tack must be secure, often with special dips or ducks mounted on the beams, and it is not recommended to tie the tack directly to the handles for carrying, as if they are pulled hard, they can come off.
| Type of anchor | Weight (kg) | For boats (m) | Features |
|---|---|---|---|
| Cat anchor | 2-4 | 2.5 - 3.5 | Foldable, versatile |
| Grapple. | 3-5 | 3.0 - 4.0 | Highly entangled |
| Flat (Danfortha) | 4-6 | 3.5 - 5.0 | For the sandy bottom |
| Stockings, cargo | 5-10 | Anybody. | Filled with stones on the spot |
Electronics and navigation on board
Modern fishing and navigation are unthinkable without sonars, GPS navigators and cartplotters, and installing such equipment on a PVC boat requires a thoughtful approach to attachment and power supply, and the main task is to protect expensive electronics from water and vibration.
So, for the mounting of sounder sensors, there are special suction cups or brackets attached to the transom. It is important to position the sensor so that when it moves, it is washed with water, but does not create excessive resistance. The battery for powering the devices should be placed in a sealed box, preferably in the nose for balancing.
How to protect contacts from oxidation?
Use WD-40 spray to displace moisture and be sure to lubricate all connectors with lithium lubricant or a special dielectric gel, which will prevent contact corrosion even in salt water.
And remember to light up. If you put LED tape around the perimeter of the cockpit or at the bottom of the boat, you can fish comfortably in the dark. You can use the LED tapes with minimal energy and can run from the boat's main battery through the boat. 12V port.
Comfort and ergonomics: seats and runduks
Long-term boating requires a comfortable seat, and regular cans are often stiff and have no backrest, and replacing them with soft seats with backrests or fitting full seats on rotating platforms changes comfort levels, but balancing is important: heavy seats in the stern can jack up the boat's nose.
Runduks have a dual function: they are storage spaces, additional seats, and structural rigidity elements. Floating runduks are a great solution, because in the event of a rollover, they do not sink and can serve as an additional support.
- 🪑 Seats with back - reduce the load on the spine.
- 🪑 Runduk seats - combine storage and comfort.
- 🪑 Platforms for chairs - allow you to change the position of the fisherman.
⚠️ Warning: When installing heavy hazelnuts or chairs, make sure that the mounting points do not damage the inflatable tubes. Use wide sling belts to distribute the load.
The optimal boat layout is achieved when the centre of gravity is shifted closer to the centre of the vessel rather than being concentrated solely in the stern or bow.
Repair kits and emergency equipment
Even the strongest boat can get a puncture, and having a quality remix is not just a recommendation, it's a safety rule. The standard kit usually includes PVC pieces, glue and degrease, but it's not enough for serious operation.
It is recommended to complete the kit with liquid PVC (cold welding) in a tube that allows you to fix punctures without applying patches "dry", and it will not be superfluous to have a pump running on the car battery to quickly pump out the sun-burning cylinders.
The emergency kit should also include a water scoop and lifeline, the scoop should be voluminous and light, and the molt should be bright and buoyant, which can save the situation in an emergency.
Frequently Asked Questions (FAQ)
Can you install transom wheels on a boat without a transom plate?
Yes, there are universally mounted wheel models that are fixed directly to the cylinders or sides of the boat with special brackets and belts, but the soft side load must be strictly dosed so as not to damage the material.
Which glue is better to use for repairing PVC in the field?
For express repairs, two-component polyurethane adhesives or special adhesive-based repair tapes that do not require drying are best suited. A typical "moment" requires ideal gluing conditions, which cannot be provided on water.
Should I take off the battery in winter if the boat is stored in the garage?
Yes, lead-acid batteries (AGM, GEL) must be stored in a charged state at plus temperature, and a discharged battery in the cold can freeze and fail, losing capacity.
How to wash a PVC boat after fishing?
Use regular water and a soft sponge. Use special PVC care products to remove persistent contaminants. Do not use solvents, gasoline or abrasive powders, as they destroy the protective layer of the material.