Finding reliable information about small boat manufacturers is often a challenge, especially when it comes to specialized alloys. aluminum-magnesium alloy (AMG) has unique anti-corrosion properties, but finding a specific manufacturer is not easy. Aluton has established itself as a supplier of reliable designs, but confusion with dealers and intermediaries creates additional information noise.
The official website is the only source where you can see the latest drawings, alloy certificates and real photos of the production. technical passports Ignoring official communication channels may lead to the purchase of counterfeit or model that does not meet the declared strength specifications.
In this article, we will discuss in detail how to distinguish the original products, which models are presented in the line and what to pay attention to when choosing. lambIt's a product that doesn't require painting and lasts for decades, and a competent approach to choosing a supplier will save you not only money, but also nerves in the future.
Advantages of AMG alloys in shipbuilding
The basis of the durability of any metal boat is the hull material, unlike conventional steel, which rusts when the protective layer is damaged. aluminum-magnesium alloys They have high corrosion resistance, which is critical for use in salt water or in aggressive river environments where conventional metals quickly become obsolete.
Argon welding technology allows you to create seams that are as strong as 90 to 95 percent of the strength of the base metal. monolithicThe weight of these vessels is much smaller than their steel counterparts, making it easier to transport on a trailer and launch.
- 🚤 Complete absence of corrosion with proper use and surface care.
- ⚓ High impact resistance, allowing you to safely moor to rocky shores.
- 🛡️ The ability to operate in any climatic zones, from the Arctic to the tropics.
- 🔧 No need for annual painting and complex maintenance of the case.
⚠️ Attention: Despite its high strength, contact with copper-containing anti-fouling paints or steel anchor chains without insulation can cause electrochemical corrosion. Use zinc treads.
The durability of the material directly affects the residual value of the vessel. AMG After 10 years of operation, it retains up to 70% of its original value, while the painted steel model loses in price much faster due to visual wear of the coating.
Overview of model range and specifications
The manufacturer offers a range of vessels that cover needs from quiet fishing in closed waters to offshore access. Each model is designed with load distribution and stability in mind. Basic versions often feature flat bottoms, ideal for shallow water, while more complex modifications have keeled contours for better wave travel.
The key to choosing is the load capacity and the allowable power of the engine. For medium-sized models, the optimal use of engines with a capacity of 15 to 40 hp is considered to be the best. cross-board reinforced, but exceed the recommended engine power values is not recommended to avoid deformation of the stern.
Comparative table of popular modifications will help to orient in the range:
| Model | Length, m | Width, m. | Load capacity, kg | Engine power, hp |
|---|---|---|---|---|
| Aluton-360 | 3.60 | 1.45 | 450 | 15 |
| Aluton-420 | 4.20 | 1.60 | 600 | 30 |
| Aluton-480 Pro | 4.80 | 1.75 | 800 | 50 |
| Aluton-550 Fish | 5.50 | 1.90 | 1000 | 75 |
When choosing a specific modification, you should pay attention to the presence of harunduks and reinforced bancs. Professional series provide space for the installation of sonars and navigation equipment. The design of the board often includes hinged bars that protect the hull when mooring and add rigidity to the entire system.
Where to find an official representative
Finding a reliable supplier requires care. The manufacturer's official website usually contains a "Where to buy" section or an interactive dealer map. This is where you find the latest information about certified partners who are authorized to sell products with a factory guarantee. Buying "by hand" or from unverified dealers deprives you of the right to service.
On the manufacturer's resource, you can always find direct contacts of the sales and technical support department, which allows you to clarify the availability of specific options, such as: electrowelding Or a reinforced keel, which may not be standard, and direct contact with the plant eliminates the risk of encountering fraud.
- 🌐 Check the domain name and the availability of an SSL security certificate on the site.
- 📄 Availability of downloadable files with drawings and certificates of conformity.
- 🏭 Real-life photos, not stock images.
- 📞 Direct phone numbers that answer during working hours.
How to check the certificate of conformity?
The certificate must have a number in the register of the Federal Service for Accreditation, you can enter this number on the website of the authority that issued the document and make sure that it is valid and issued for the products that are offered to you.
Beware of clone sites that copy the design of official pages, but offer prices well below market prices. The low price is often achieved by using thinner metal or simplified seam design, which is impossible to determine from a photograph.
Package and additional options
The basic version of the vessel is only a path to the perfect boat, the factory equipment usually includes a hull, removable cans and a set of oars, but for comfortable operation requires a number of improvements. steering And the windshield, which turns a simple boat into a full-fledged boat.
Special attention should be paid to the options of installing floorboards (floors). Aluminum grooved sheet not only protects the bottom from abrasion, but also hides insulation materials if the boat is used in winter.
⚠️ Warning: Installation of additional equipment not designed (e.g. heavy fuel canisters) may shift the centre of gravity and impair the stability of the vessel.
For fishing enthusiasts, options for installing spinning and sonar mounts are relevant, some models have rod glasses (included in welding). powder-coated internal surfaces, which facilitates washing and gives the interior an aesthetic appearance.
☑️ Checking of completeness upon receipt
GIMS registration and legal aspects
Any small vessel weighing more than 200 kg or with an engine capacity of more than 8 kW (about 10.8 hp) is subject to mandatory registration. The official website provides all the necessary documents: a purchase agreement, a technical data sheet and a payment check.
The registration process requires a technical inspection, and AMG boats generally go through this procedure without problems unless they have been modified by the owner in a way that is not designed to be effective, and it is important to preserve all documents, as they are proof of the legality of the metal and assembly.
Owners should be aware of the rules of navigation and equipment requirements (life jackets, anchor, scoop), lack of necessary equipment can lead to a fine and a ban on operation, legal purity of the transaction is the guarantee of a relaxing rest on the water.
Keep electronic copies of all the documents about the purchase of the boat in the cloud. In the event of loss of paper originals, the data recovery through the manufacturer will be much faster.
Care and maintenance of aluminium vessels
Although aluminum does not rust, it requires proper care, the main enemy is the fouling of algae and shells in places where they are constantly in the water, and regular washing with fresh water after going to sea prevents the accumulation of salts that can provoke local corrosion processes.
Mechanical damage, such as deep scratches, does not require immediate repair, as in the case of steel. However, to maintain the aesthetic appearance and smoothness of the contours, it is recommended to use special polishes for aluminum. Once a season, it is useful to inspect the transmiss and keel for cracks.
Keeping a boat in winter requires no special conditions, just flip it over or install it on the kilblocks. It is important to ensure that the interior space is ventilated to avoid condensation, which, when drained, can leave stains. Proper care extends the life of the boat for decades.
Aluminum boats require virtually no maintenance costs, but regular inspection of welds and removal of contaminants are required to maintain their presentation and safety.
Frequently Asked Questions (FAQ)
Can I cook a boat from AMG on my own?
Theoretically, it can, but it requires a special welding machine (AC/DC TIG), high-purity argon and filler wire of the appropriate brand (for example, Sv-AMg6). Without experience in welding aluminum, there is a high risk of burning thin metal or creating weak seams, which is dangerous for operation on water.
What is the life of the Aluton boats?
With proper operation and the absence of critical mechanical damage, the service life of the AMG5 alloy housings is 30-50 years or more. Metal does not lose its strength specifications over time, unlike composites or wood.
Should I paint an aluminum boat?
No, painting an aluminum boat is not mandatory and often even undesirable, as it violates the natural oxide film, usually painted only for decorative purposes or for camouflage, using special soils for non-ferrous metals.
Will the Aluton boat stand the rocky bottom?
Yes, AMG alloys are highly plastic and tough, and when struck, aluminum will remember (which can be corrected) rather than crack, as would happen to fiberglass or steel at low temperatures.