Choosing the first swimmer for fishing or resting on the water is always a balance between cost, reliability and functionality. Aluminum boat Tactics 320It's a real bestseller in the domestic market because of its affordability and simplicity of design, and many aquatic motorists see it as the perfect workhorse for small bodies of water where there is no need for large passenger capacity, but critical resistance to damage.
This dural It was designed to withstand the impacts of rocky bottoms and shores, which often occur when landing in unequipped areas, unlike inflatables, it does not risk puncture, and it takes minutes to assemble and prepare for descent, which is especially valuable for those who value their time.
Shell design and materials used
The basis of the reliability of the model is the use of aviation alloy AMG5MThe bottom is 2 mm thick, which provides protection against sharp objects, and the sides are made of a sheet thickness of 1.5 mm to reduce the total weight of the vessel. The elements are connected by argon-arc welding, which guarantees the tightness of the seams and the durability of the structure in an aggressive aquatic environment.
The body has a flat-wheeled wiring, which allows you to feel confident in the water even in the presence of a slight excitement, this shape of the bottom allows you to quickly go into plane when you install a suitable motor. It is important to note that all the angular connections are reinforced, and the transom is made of marine plywood with high moisture resistance, sheathed with aluminum, which prevents the material from stratifying during prolonged contact with water.
⚠️ Warning: Despite the high strength of the alloy, avoid dragging the boat on sand or pebbles without protection. This can lead to thinning of the bottom and the appearance of microcracks in the welds.
For ease of use, there are special elements, such as a beam around the perimeter, which protects the sides when mooring. In the bow, there is often a switch for installing the anchor spindle, and in the stern, there is a tray plate with the ability to adjust the angle of the engine. Tactics 320 Not just a piece of metal, but a full-fledged small craft.
Technical specifications and dimensions
When choosing a boat, potential buyers often focus on dry numbers that determine the vessel's capabilities on the water. Tactics 320 It is a compact rowing boat, but it can comfortably accommodate two people with a minimum set of equipment, and the dimensions of the vessel are optimized for transportation in the trunk of a car or on the roof, which solves the problem of logistics to the fishing site.
The table below provides the main technical parameters that will help you compare this model with competitors and evaluate its suitability for your tasks.
| Parameter | Meaning | Units of measurement |
|---|---|---|
| Full length | 3.20 | n |
| maximum width | 1.36 | n |
| Height of board | 0.38 | n |
| Load capacity | 250 | kilogram |
| Body weight | 32-35 | kilogram |
It is worth noting that the real weight may vary slightly depending on the year of production and configuration, as the manufacturer periodically upgrades the technological process. Displacement The vessel allows it to remain stable even when the load is shifted, however, exceeding the declared load capacity is strictly not recommended for safety reasons.
Motor installation and driving performance
Although Tactics 320 Often used as a rowing boat, its design provides for the possibility of installing an outboard motor. The recommended engine power is from 2 to 4 hp, which allows speeds up to 10-12 km / h. Installation of a more powerful engine is impractical due to limitations on the load capacity and shape of the body, which is not designed for high speeds.
When going to planing with one man and a 3-4 hp engine, the boat demonstrates good course stability. The flat bottom works effectively in shallow water, allowing you to pass sections with a depth of less than 30 cm if you work with gas carefully. However, it should be remembered that the lack of a keel line makes the vessel sensitive to lateral wave, so maneuvers must be performed smoothly.
For those who plan to use the motor often, it is recommended to purchase or manufacture transom wheels immediately. The weight of the boat assembled with the motor and battery can be significant for carrying by hand, especially on soft ground. Proper centering of the cargo also plays a key role: moving the passenger or cargo closer to the transom can improve the plane output, but reduce handling.
Secrets of fuel economy on small boats
On small boats, such as Tactic 320, fuel savings are achieved not only by choosing the mode of operation of the engine, but also by properly loading. Avoid rolling on the side, as this increases water resistance.
Comfort and additional equipment
The basic equipment of the boat is usually minimalistic and includes the body itself, seats (banks) and keys. However, to improve comfort on the water, owners often resort to tuning. fish-table or boxes under the seat, which allows you to store the gear in dryness and have a workplace.
Splash protection is a matter of installing a windshield or awning, although this is rarely done for a 3.2-meter model because of the small area of the cockpit. More relevant is the storage of things: the use of sealers or waterproof boxes is a prerequisite, since the spray will get inside during the wave. Some craftsmen install soft linings on the cans, which greatly increases comfort during many hours of fishing.
- 🎣 Installation of holders for spinning greatly simplifies fishing with trolling or plumbing.
- 🔦 Fixing for a navigator or sonar on the nose or for an outboard motor is a necessity for a modern angler.
- 🪣 Organization of the place under anchor with a quick-removal mechanism saves time and nerves when fishing on the current.
It's important to understand that any extra weight of equipment is subtracted from payload capacity. So when you plan to tune, always keep in mind the limits specified in the product passport. The lightness of an aluminum boat is its main trump card, and it is not worth overloading it.
Maintenance and durability of operation
One of the main advantages of aluminum boats over PVC and wooden analogues is their unpretentiousness in maintenance. AMG5M alloy It is practically free from corrosion unless prolonged contact with salt water is allowed without fresh washing; however, regular inspection of the shell for cracks and weld condition is mandatory, especially after harsh operating conditions.
A plywood tray plate is a weak spot that requires attention. Even when protected by aluminum, moisture can penetrate through fastening holes or micro-cracks in the sealant. Once a season, it is recommended to check the condition of the plywood and, if necessary, update the lacquer coating or sealing to avoid rotting and loss of strength.
⚠️ Warning: When storing a boat in winter, be sure to turn it upside down or cover it with an awning. The accumulation of snow and rainwater inside the hull creates extra stress and can lead to deformation of the seams when freezing.
Looking after the body doesn't require complex chemistry either: it's enough to wash the body with a soft sponge using car shampoo; abrasives are not recommended, as they can damage the aluminum oxide film. aluminum-boat It can last for decades, passed down from generation to generation.
☑️ Seasonal boat preparation
Comparison with competitors and final conclusions
There are many analogues on the market, such as the boats "Crimea", "Ob" or various models from the company "Metal Service". Tactics 320 They are better off in weight and compactness while still being affordable, ideal for a solo fisherman or couple who don't plan long hikes and value simplicity.
Unlike larger boats, this boat can be stored on a balcony or in a garage without any problems with space, and its simplicity means that there is little to break, and repairing the hole (in case of an extreme situation) is possible even in the field with cold welding or rivets.
When buying a used boat, pay attention to the color of the aluminum. If the metal has darkened or has white oxidation spots, then the boat was poorly monitored and kept in water without treatment.
So to sum up, this is a rational choice for entering the world of hydraulics, which is frivolous, but it's fully functional. The optimal length of 3.2 meters allows you to use the boat on small rivers and large reservoirs in calm weather, without violating safety rules.
The 320 tactic is a balance between the minimum weight to carry and sufficient stability for safe fishing.
Frequently Asked Questions (FAQ)
Can I put a 5 hp engine on the Tactic 320 boat?
Technically, you can set it up because the transom will bear the weight, but it's not recommended. The boat's capacity is limited to 250 kg, and with a 5 hp engine, fuel and two passengers, you run the risk of over-the-limits, which is dangerous. Also, the flat bottom is not designed for the high speeds that such a motor will develop, which will lead to a strong shock to the wave and discomfort.
Do I need to register the Tactic 320 boat with GIMS?
Under current Russian law, registration is required for small vessels weighing more than 200 kg or with an engine power of more than 8 kW (about 10.8 hp). Since the hull weight of the Tactic 320 is about 35 kg and the recommended engine is up to 4-5 hp, registration is not required unless you exceed these limits in terms of power and total weight of the outfit vessel.
What is the maximum wave size for this boat?
For flat-bottomed aluminum boats of small size, wave heights of up to 0.25 meters are considered safe. With a higher wave height, there is a risk of flooding the side with water and loss of stability. You should only go out into open water in calm or in very weak winds.
How to fix a small crack in the bottom in the field?
For temporary repairs, epoxy adhesive with a fabric base or special remakes for PVC boats (although they are worse on metal) are suitable. The best option is cold welding for aluminum, which is sold in automobile stores. However, after such repairs, you need to carry out a full argon welding in the workshop at the earliest opportunity.