Choosing a boat for fishing or hunting is always a trade-off between load capacity, stability and maneuverability. Armada 64The silk, which has become a hit in recent years in waterway regions, is attracting attention not only for its affordable price, but also for its clever geometry, which allows you to feel confident on the wave.
Many boaters are looking for exactly the option that can be used both for quiet fishing in reeds, and for going out into open water in moderate winds. Armada 64 In this context, it acts as a versatile soldier, combining simplicity of design and functionality, and in this article we will discuss in detail why this model deserves attention, what hidden advantages it has and what you should pay special attention to when buying.
Design features and geometry of the body
The basis of any boat is its hull, and in the case of the model 64, manufacturers have made a bet on a time-tested scheme with a long-term model. keeliness This allows the vessel to cut the wave rather than slap it, which greatly improves comfort when driving, and the bottom is made of sheet aluminum, which is strong enough to operate in conditions where there is a high risk of contact with snags or rocky bottoms.
The boats are reinforced, which gives them additional rigidity, and unlike some competitors, there is no metal play-through effect on loading. The width of the body transom is 160 cm, which is the optimal indicator for installing a motor with a capacity of up to 30 hp. This geometry provides excellent stability, allowing fishermen to safely navigate the deck even with cargo.
It is important to note the quality of welds, which are carefully tested for leakage. The design provides for a reinforced transom designed to hang the outboard motor. This is a critical element, since it is the transom that takes on the main vibration and traction load during movement.
⚠️ Warning: When operating a boat in salt water or an aggressive environment, be sure to treat welded seams with anti-corrosion compounds, even if the metal has a factory coating. This will extend the life of the hull by 2-3 times.
Internal space and layout
The interior of the ARMADA 64 is ergonomically designed, the space is divided into several functional zones, allowing efficient use of usable space, the bow is usually reserved for storage or can be equipped with an additional passenger seat, the central part of the deck remains free, providing convenience when fishing with spinning or trolling.
There are special areas for installation of equipment, many owners immediately mount on the ground. bank The rear cockpit is equipped with hand-helds that not only store equipment, but also add buoyancy to the boat in emergency situations. The floor in the boat is often performed with riffling, which prevents slipping in wet shoes.
The particular thing that deserves attention is the water drain system, which is a well-designed drain valve in the 64, which is located at the lowest point of the transom, which allows you to quickly drain the boat after fishing or rain, just by pulling the cork on the shore, but it's worth remembering that when you move on water, the cork must be tightly closed to avoid splashing the cockpit.
- 🚤 Capacity: The boat can accommodate 3-4 people with a full set of equipment.
- 🛡️ Defense: Reinforced sides and keel protect the body from mechanical damage.
- 💧 Plum: Convenient bottom valve for quick removal of water from the cockpit.
Technical specifications and compatibility with motors
When choosing a motorboat, the key parameter is the power of the recommended engine. For the ARMADA 64, the optimal range is 15 to 30 horsepower. Installing a lower-power engine will not allow you to unlock the speed potential, and exceeding the recommended limit can lead to transom overload and reduce safety.
Speed performance is directly dependent on the load and type of propeller. With one fisherman and a 20 hp engine, the boat is able to reach speeds of up to 35-40 km / h, which is enough to quickly move to the fishing point. Two-stroke engines are preferable here because of the lower weight, although four-strokes will provide greater economy and quietness.
Below is a table with the main technical data that will help you decide on the choice of equipment:
| Parameter | Meaning | Units of measurement |
|---|---|---|
| Maximum length | 3600 | mm |
| maximum width | 1600 | mm |
| Height of board | 500 | mm |
| Load capacity | 500 | kilogram |
| Body weight | 95-105 | kilogram |
When installing a motor with a capacity of more than 20 hp, it is recommended to use a hydraulic steering wheel or remote control to improve comfort and safety of control.
Performance in water
The behavior of the boat on the water is what is felt immediately after leaving the shore. ARMADA 64 demonstrates a confident exit to planing even with two passengers on board. The silky nose effectively extinguishes the shocks against the wave, but with lateral excitement longer than 0.5 meters, caution should be exercised and slow down.
The boat's handling is rated as good, especially if the long leg motor is used. A short leg can lead to a propeller taking air in corners when rolling sharply. Many owners install hydrowings on transom plates to improve their driving performance, making the ride smoother and more stable.
It is important to consider wind sailing. With strong side winds, the boat can demolish, so you need to constantly adjust your course. Experienced boaters advise always having an anchor of sufficient weight, as it will be difficult to hold a position without it on the current or wind.
Effect of loading on the different
When fully loaded (4 people + cargo), the boat's nose can peck, so it is recommended to distribute the weight evenly, moving passengers closer to the center or stern for optimal planing.
Transport and storage
One of the main questions for the owner is how to get the boat to the water. ARMADA 64 weighs about 100 kg, which allows you to transport it on a light car trailer or even on the roof of an SUV (with the appropriate mounts and physical strength).
When stored in the off-season, the boat is recommended to be turned upside down or mounted on special kilblocks, which will prevent the hull from deforming under its own weight and ensure that the internal compartments are ventilated. Metal boats are not afraid of frost, but sharp temperature changes can contribute to the formation of condensation inside, which leads to corrosion.
If you plan to keep the boat in the open, be sure to use a breathable cover, which will protect from precipitation, but will allow moisture to escape. Hermetic wrapping with plastic will lead to the formation of a “greenhouse effect” and accelerated rotting of wooden elements or the appearance of mold on the upholstery.
☑️ Preparing the boat for winter storage
Typical problems and their solution
Like any technical product, the ARMADA 64 can have its own specifications that are manifested during operation. Owners often note the need for additional noise insulation, since the metal perfectly conducts the sounds of the engine running and splashing waves. The solution to this problem is the use of vibration insulating materials and floor mats.
Another thing is painting. Factory coatings can be thin, so many enthusiasts recommend that you do additional corrosion treatment immediately after you buy, especially at welds and fasteners, which will not take long, but will significantly increase the product's life.
Sometimes there are complaints about the quality of accessories (pens, loops runduks), they are recommended to be immediately checked and, if necessary, replaced with more reliable analogues of stainless steel or brass.
⚠️ Warning: Do not use conventional enamel for interior work to paint the case. Only specialized soils and paints for aluminum will provide proper adhesion and protection from water.
Timely anti-corrosion treatment and replacement of weak fittings in the first year of operation increase the service life of the ARMADA 64 boat to 15-20 years without major repairs.
Summary: Is it worth buying?
To sum up, the ARMADA 64 is a sturdy mid-range in its class, not without the disadvantages of budget metal boats, but offers a great balance of value and quality. For those looking for a reliable medium-sized fishing vessel and willing to take time to care for metal, this is a great choice.
The boat is easy to repair, parts and components are available, and the design is understandable to any home craftsman. If you're willing to put up with some noise and the need for periodic paint for reliability and spaciousness, the Armada 64 will be a faithful assistant for years to come.
Before buying, be sure to inspect the specific specimen, check the geometry of the transom and the absence of dents. Good luck on the water and no tail, no scales!
What is the maximum speed of the Armada 64?
When installing the engine 30 hp and minimum load speed can reach 45-50 km / h However, cruising speed for fuel economy and safety is usually 30-35 km / h.
Do I need to register this boat with GIMS?
Yes, if the weight of the curbed boat (hull + engine) exceeds 200 kg, or if the engine power is more than 8 kW (about 10.8 hp).
Is it possible to use a boat in winter?
The metal case is not afraid of ice, but operating in winter requires caution, metal becomes more fragile in the cold, and contact with people in warm clothes requires coating, and you also need to make sure that the water in the hold does not freeze, expanding and deforming the skin.
Which anchor is best suited for this boat?
For a boat 3.6 meters long and weighing about 100 kg, an anchor weighing 4-6 kg (for example, Hall anchor or paws) should be optimal.