Choosing a reliable boat for fishing or family vacations on the water often comes down to finding a balance between cost, strength and comfort. Baltmotors Galaxy 50The silk-powered model, which has proven to be a versatile option for Russian water bodies, attracts the attention of both beginners and experienced water engines with its affordable price and practical design.
The body, made of AMG5M aluminum-magnesium alloy, provides high resistance to corrosion and mechanical damage. Galaxy 50 It's becoming the perfect workhorse, able to withstand intense loads throughout the navigation season, but is it worth it to be your first boat?
In this article, we will discuss in detail all aspects of operation, from the features of the contours of the hull to the nuances of the installation of attachments. You will learn the real performance indicators and understand which motor unit will be optimal for this model. A critical factor for safety is the strictly recommended load capacity of 400 kg, exceeding which is strictly prohibited during the excitement.
Structural features of the body and materials
The basis of any boat is its hull, and in the case of Baltmotors Galaxy 50 Welding technology, which is classic for the budget segment, is used: 2 mm thick sheets of metal are connected to form an outer seam, which makes it easier to repair in the field, but requires careful attention to anti-corrosion treatment of welded joints in the early years of operation.
The hull contours can be described as transitional from flat-bottomed to moderate V-shaped, the bow has a slight lift, which allows you to enter the wave more confidently than purely flat-bottomed counterparts, but it is worth remembering that this is not a sea boat: keeliness Here is minimal, which limits the ability to move with strong lateral excitement.
The interior space is divided into three compartments by bulkheads, which increases the unsinkability. forpick and afterpeak They can be used to store things if they are kept tight, although they are often left empty to ensure buoyancy, and the bottom is reinforced with welded profiles that also serve as stringers, adding structural rigidities.
- 🛡️ Material: Aluminum-magnesium alloy AMg5M, resistant to salt water.
- ⚓ Bottom thickness: 2 mm, which allows you to go out on gentle banks without fear of damaging the skin.
- 📏 Dimensions: Length 4.95 m, width 1.65 m, which is convenient for transportation on a passenger trailer.
Why exactly the AMg5M alloy?
Aluminum-magnesium alloys (5xxx series) have excellent weldability and corrosion resistance in the marine environment, and unlike duraluminium, they are not susceptible to intercrystalline corrosion after welding, which is critical for the longevity of the boat.
Comfort and ergonomics of the cockpit
Internal layout Baltmotors Galaxy 50 It's designed with a focus on functionality, and in the bow there's a handkerchief that has a hinged lid, and it's ideal for storing anchor end, life jackets, or spray-proof dry supplies.
The stern part is set aside for installation cross-engine The banks are made in the form of simple removable boards or shops, depending on the year of manufacture and equipment. For long transitions, owners often have to upgrade the seating area by adding soft linings or buying regular seats.
The control can be carried out both by tiller and remotely, when installing the tube-tether traction. steering The floor of the boat is flat, which makes it easier to move, but in wet weather water can accumulate in corners, requiring periodic pumping.
To improve your comfort in rainy weather, install a homemade PVC awning on a water pipe frame, which is cheap and effective in protecting against precipitation.
Engine selection and driving performance
The choice of a power plant for Galaxies 50 The manufacturer recommends using motors with a capacity of 5 to 15 hp, however, real practice shows that for a confident planing with two passengers and cargo on board, the minimum power must be 9.9 hp
With a 5-6 hp engine, the boat goes to the plane with only one driver and a minimum fuel reserve. Installing a 15-horsepower engine turns the boat into a high-speed vessel capable of speeding up to 30-32 km / h. It is important to choose the right screw pitch: for severe conditions and trolling, you need a traction screw, and for walks - high-speed.
The slab is reinforced and allows you to fasten the engines with a long leg. When you install a powerful motor, you need to watch for the alignment: shift centre The best position is when the boat is going smoothly, without burrowing or excessive buoying.
- 🚀 Minimum: 5 hp (only for quiet movement in displacement mode).
- 🏎️ Optimum: 9.9 hp (confident entry to plane with 1-2 people).
- 🔥 Maximum: 15 hp (maximum speed and dynamics).
Don't chase the maximum power. The 9.9 hp engine often turns out to be the middle ground in terms of fuel consumption and dynamics for this model.
Fuel consumption and economy
Economical is one of the key parameters when choosing a boat. Baltmotors Galaxy 50 At cruising speeds (about 20-22 km/h), fuel consumption is about 2.5-3 liters per hour, which allows you to travel considerable distances with one full tank.
When driving in displacement mode (speed up to 10 km / h), the flow rate drops to 1-1.5 liters per hour. This is the ideal mode for fishing, when you do not need to move quickly, and it is important to quietly walk through the water area. A full tank of a standard hanging tank (12 liters) provides autonomy for up to 5-6 hours of travel at medium speeds.
It is worth considering that the actual consumption depends on the loading of the boat, the condition of the propeller and the quality of fuel. leaded or fuels with an octane number below the recommended number can lead to detonation and increased consumption.
Transport and storage
One of the strengths of the model is its transportability, the weight of the hull is about 90-100 kg (depending on the configuration), which allows you to launch a boat with 2-3 people without the use of a trader. boat-trailer.
Dimensions Galaxies 50 They allow you to put it in a standard garage or even under a canopy in the yard, and when stored in winter, you need to thoroughly wash the engine cooling system (if it stays on the transom) and turn the boat over or put it on the kilblocks to avoid deformation of the hull under its own weight.
For transportation on the roof of the car (if the load capacity of the roof and the length of the car allows) will require special equipment, but due to the length of almost 5 meters, this option is suitable only for long-base SUVs or minibuses. The standard option is a trailer where the boat is fixed with a nose stop and aft winches.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 4.95 m | Comfortable for a trailer |
| Width | 1.65 m | Compact width |
| Height of board | 0.65 m | Average sailing |
| Passenger capacity | 4 people. | Passport. |
| Load capacity | 400 kg | Including engine and fuel |
Tuning and modifications DIY
Owners often don't stop at factory design. The first and most popular development is the installation. rod-crawler This allows you to take control to the center of the cockpit or on board, freeing up space.
The second step is to upgrade the seats, and the regular cans are tough and uncomfortable for long fishing, and the installation of soft seats on swivel bases (sliders) drastically changes the comfort level, and often install additional knobs in the nose to store gear.
☑️ The Galaxy Tuning Plan 50
Some craftsmen install windscreens made of Plexiglas, which allows you to comfortably operate the boat in cold weather, and it is also popular to paste the inside of the side with carpet or foam material, which reduces the noise of rain and prevents things from slipping along smooth aluminum.
⚠️ Attention: When drilling holes in the case to install additional equipment, be sure to use a sealant for marine applications and rivets made of stainless steel or aluminum. Conventional steel rusts in one season, turning the hole into a hotbed of corrosion.
Frequently Asked Questions (FAQ)
Is it possible to go out on Galaxy 50 to Lake Ladoga or Onega?
Access to large lakes with an open wave is possible only in calm weather and in close proximity to the shore. Baltmotors Galaxy 50 It is not a seagoing vessel, and its low sides and low keeliness make it vulnerable to high waves.
Do I need to paint the bottom of the boat?
Aluminum alloy AMG5M does not require painting to protect against corrosion. However, painting (for example, rubber paint or epoxy compounds) can improve the appearance, reduce algae fouling and slightly reduce noise.
Which screw is better to choose for fishing?
For fishing, when low-speed traction and full-load movement are important, it is better to choose a screw with a smaller pitch (for example, 6-7 inches for 9.9 hp). This will make it easier to go to the plane and feel more confident in overgrown areas.
How long does Galaxy 50's hull last?
With careful operation and the absence of mechanical damage (knocks on stones at speed), the body lasts 15-20 years or more. The main enemy is the galvanic pair when used with the motor, so it is important to monitor the condition of the vehicle. lantern And the presence of zinc protectors.
Does the boat have a GIMS certificate?
Yes, model. Galaxy 50 It is certified and subject to registration with GIMS (when installing a motor with a capacity of more than 8 kW or 10.88 hp, although the rules change, and now all boats with engines are often registered).