Choosing a boat for fishing or family vacations on the water is always a search for a balance between cost, reliability and comfort. In the segment of small boats, a special place is occupied by products made of aluminum-magnesium alloy, which have proven to be indestructible and durable designs. Best 390 It stands out for its versatility and thoughtful ergonomics, which makes it popular with boaters.
This boat is designed to operate in a variety of conditions, from calm lakes to moderate chop at large reservoirs. hull The vessel is made using modern welding and molding technologies, which ensure high strength at a relatively low weight. Owners often note that it is the combination of driving qualities and practicality that makes this model popular for several seasons in a row.
In this review, we will discuss in detail the design features, technical parameters and real-life experiences of using this boat. bottom and sides thickness of 2 mm This is the best solution for this dimension, as well as which motors are best suited to unlock the potential of the vessel on the water.
Structural features and materials of the body
The basis of reliability of any metal boat is the material from which it is made. Best 390 Aluminum-magnesium alloy AMg5M is used. This material has high corrosion resistance, which is critical for constant contact with water, especially if it is a salt water or aggressive environment.
Production technology involves a deep nose hood, which allows you to get contours without additional welds in the most loaded areas. Welded joints They're argon-arc welding, which is a monolithic structure, and this eliminates the risk of leakage at the seams even after long-term use and impact loads on rocks or logs.
⚠️ Warning: Despite the high strength of the AMg5 alloy, avoid hitting sharp objects at right angles at high speed. The metal may deform, although it will not burst like fiberglass.
The bottom of the boat is equipped with longitudinal redans, which improve germination on the wave and ensure the stability of the course. coamings It is high enough to effectively cut off the spray, keeping the cockpit dry even when driving against the wind, and the transom design is reinforced to allow motors up to 15 hp to be installed without the risk of deformation.
Technical specifications and driving performance
The dimensions of the vessel make it easy to transport it on the roof of a passenger car or in a trailer without requiring special permits. The length of the hull is 3900 mm, and the width on the midsection is 1480 mm.
On the water. Best 390 Because of its 10 degrees bottom keel, the boat is very good at cutting waves and not prone to yaws, and when you install an average-powered motor, the vessel quickly glides, even when fully loaded. planing It starts at 18-20 km/h, which saves fuel when moving over long distances.
For clarity, consider the main parameters that affect the choice of motor and equipment:
| Parameter | Meaning | Note |
|---|---|---|
| Longest length | 3.90 m | Including the transom. |
| largest width | 1.48 m | Midel-spangout. |
| Height of board | 0.45m | With coomings. |
| Hull mass | 58 kg | No equipment. |
| Load capacity | 350 kg | 3 people + cargo |
Importantly, the actual speed depends not only on the engine power, but also on the quality of the screw and the condition of the bottom. The smooth surface of aluminum contributes to minimal water resistance. At 9.9 hp, the boat reaches a speed of about 30-32 km / h with one driver.
Comfort and internal arrangement of the cockpit
The ergonomics of the interior space are designed to make it as comfortable as possible for fishermen and tourists, and the floor of the cockpit is made of corrugated aluminum sheet, which prevents slipping even in wet shoes, especially when fishing or in rain.
The sides are located buoyancyThey're not only unsinkable, but also comfortable seats, they're covered with soft pads, which adds comfort to long walks, and the bow has a luggage compartment that's covered with a lid where you can fold dry stuff or anchor gear.
Equipment storage secrets
In the nose compartment, it is recommended to use sealants even for things in plastic containers. Spray can flow through the slits of the lid at a strong wave, and moisture can spoil electronics or clothing.
The boat trawler is equipped with a bracket for installation outboard It has a handy handle for carrying or mooring, and it also has the ability to install a running awning that turns an open boat into a full-fledged microboat that protects against sun and rain, and the tent frame is usually made of duraluminium tubes, which makes the structure light and durable.
⚠️ Attention: When installing an awning, watch for the tension of the slings. Excessive tension in windy weather can lead to deformation of the mounting places on the sides.
Compatibility with outboard motors
The choice of engine is a key point in the configuration of the boat. Best 390 The optimal power range is 6-15 hp Motors of lower power will not allow effective use of the glittering mode, and more powerful can overload the transom and disrupt the balancing.
The most popular choice is Yamaha, Tohatsu or their Chinese counterparts, which are lightweight, which is critical for boats of this size. Four-stroke engines are also suitable, but will add about 10-15 kg to the total weight, which will affect speed and fuel consumption.
☑️ Check before installing the engine
When installing the engine, it is important to choose the right pitch of the screw. For fishing and cargo transportation, a smaller screw with a smaller pitch is better suited, providing good traction at low speeds. For high-speed walks, you can consider the option with a faster screw.
Use transom wheels to move the boat along the shore. The weight of 60 kg is difficult to carry manually over long distances, and the wheels will save time and effort on the descent.
Comparison with competitors and analogues
There are several direct competitors in the class of aluminum boats about 4 meters long. Best 390 The main advantage of Bester is a more modern shape of the hull and the use of the AMG5 alloy, which is lighter and stronger than the traditional AMG61.
Unlike hard-bottomed inflatable boats, the aluminum hull does not require constant drying and is not afraid of punctures. However, the metal boat requires a more careful attitude when transporting on a trailer to avoid scratching the coating. Compared to (plastic fiberglass) counterparts, aluminum benefits in maintainability and durability.
The key factor in the choice is often the price. Cost The bester 390 is in the mid-range, offering the best value for money among factory metal boats. Simplicity of design minimizes the number of items that can fail.
Aluminum boats require less maintenance in the off-season than fiberglass or inflatable, as they are not afraid of frost and ultraviolet light when stored properly.
Operational rules and maintenance
The long life of the boat depends on proper maintenance. AMG5 aluminum alloy does not rust in the usual sense, but can be subjected to electrochemical corrosion when in contact with other metals in salt water.
Check the welds and fittings regularly. Vibration when the engine is running can weaken bolt joints. You should also pay attention to the condition of the antifouling coating if the boat is in water. For storage, it is better to use a dry garage or a wet awning.
⚠️ Warning: Do not keep the boat permanently filled with water. Stagnation of water in the hold accelerates the oxidation of the metal and promotes fouling with microorganisms that can damage the protective oxide layer.
Timely lubrication of moving elements, such as lids and ducks, will prolong their lives. If you use a boat in winter, make sure that the ice does not compress the sides, although aluminum has a certain elasticity. Proper preservation for the winter will allow you to meet the new season without additional repair costs.
Frequently Asked Questions (FAQ)
Can I paint an aluminum boat called Bester 390?
Yes, painting is possible, but it requires special preparation, using soil for non-ferrous metals (e.g., zinc-based) and special paints for aluminum, and ordinary paint will quickly peel off due to oxidation of the surface.
What is the real load capacity for three people?
rated carrying capacity is 350 kg, which means that three people of average size (80-90 kg) will fit, but the free side will be minimal. For comfortable fishing, three people should be limited to two passengers and equipment.
Do I need to register a boat with GIMS?
Yes, the boat is subject to registration, as its mass in running order (with an engine) exceeds 200 kg, or if the power of the installed engine exceeds 8 hp (or 10 hp depending on the current rules and year of release, but for 15 hp registration is mandatory).
How does the boat behave on a wave of 0.5 meters?
Thanks to the keeled contours and the height of the side, the wave of 0.5 meters passes softly, the boat does not capture water with its nose and does not receive hard blows against the crest of the wave, which is typical for flat-bottomers.