The organization of the fishing process in an inflatable boat requires a special approach to the placement of gear. spinnerlyctross is one of the most popular solutions for PVC boat owners, allowing them to free their hands, lock their fishing rods during drift or trolling, and safely transport their gear between fishing points.
Fixing directly to lyctros It has its advantages over being mounted on a transom or floorboard, which does not take up useful space in the cockpit and provides a rigid fixation at the side, which is critical when large fish are actively pecking or jerking.
Inflatable boat owners often face the challenge of choosing between universal models and specialized mounts. lyctros imposes its requirements on the design of the holder, so as not to damage the cylinders and ensure a reliable grip even on the wave.
⚠️ Warning: When installing any equipment on the lyctross, make sure that the fasteners do not have sharp edges that can damage the sling or cylinder fabric when rocking the boat.
Design features of holders for PVC boats
The modern market offers many variations of mounts adapted to the specifics of inflatable vessels, the main element here is the fixation mechanism to the sling, which must be both durable and gentle for the material of the boat, most often models using a system of tight belts or rigid brackets with soft pads.
fabrication Plastic, metal and composite alloys behave differently in aggressive aquatic environments. For fishing in salt water, it is preferable to use stainless steel brand. AISI 316 or high-quality anodized aluminum, while for fresh water bodies, more budget options are also suitable.
The angle of the glass is another important parameter: trolling requires an angle close to the horizontal, so that the gear goes behind the boat without getting confused in the screw, and for catching in the throw or drifting, it is more convenient to have a vertical or slightly inclined position, allowing you to quickly intercept the rod.
- 🎣 Universality: the possibility of adjusting the diameter of the glass under different spinning handles.
- ⚓ Defense: the presence of rubber or silicone linings in places of contact with lyctross.
- 🌊 Drainage: The hole in the bottom for quick drainage of water.
Use silicone lubrication on the moving parts of the metal holder after each fishing - this will prevent the mechanisms from acidifying from salt deposits.
Materials: Plastic, Metal or Composite?
The choice of the holder’s material directly affects its weight, cost and service life. Plastic modelsThese are made of ABS plastic or polypropylene, which are lightweight and completely corrosive, and they do not scratch the sides of the boat or heat up in the sun, but they may be less resistant to impact loads when catching captured fish.
Metal structures are typically made of stainless steel, a choice for those looking for maximum reliability. Stainless steel It can withstand serious jerks, it doesn't deform, it lasts for decades, but it's a higher weight holder, and it's a risk of accidental damage to the balloon if you don't handle it carefully.
Composite materials and fiberglass occupy an intermediate niche, they combine the strength of metal with the lightness of plastic. Often these holders have complex geometry that is difficult to implement in metal, when choosing, you should pay attention to the quality of the casting and the absence of microcracks.
Secrets of Durability of Materials
The most durable holders are made of marine stainless steel with a polished surface. Cheap silumine can crumble after 2-3 seasons of active use under the influence of ultraviolet light and moisture.
| Materials | Weight. | Resistance to corrosion | Price. |
|---|---|---|---|
| Stainless steel | Highly | Great. | High. |
| ABS plastic | Low. | High. | Low. |
| Aluminum (anode). | Medium. | Good. | Medium |
| Fiberglass | Low. | High. | Medium |
Types of lyctross attachment
The way the holder is fixed on the sling determines the ease of use and speed of installation. belt-holdIt's a loop of a strong tape with fastex or Velcro, and this allows you to place the holder anywhere along the side and quickly remove it if necessary.
The rigid brackets and clamps provide a more stable position for the tackle, which covers the lyctross on both sides and is tightened by screws, which eliminates the holder from rotating around the axis of the sling, which often happens with soft belts when fish are heavily tracted.
There are also combined systems where the holder has a base for installation on the Planar Or a standard glass, but it comes with a lyctros adapter, which gives the wearer the flexibility to use the equipment on different types of boats.
⚠️ Note: Do not use metal clamps without rubber pads to attach to the lyctros - they can RUB the strands of the sling, which will lead to its rupture under load.
Instructions for installing the holder on the PVC boat
The installation process requires care to avoid damaging the inflatable elements, first inflate the boat to working pressure and let it stand for a while, then determine the optimal installation location, given the length of the spinning and the angle of wiring.
If you use a belt mount, apply the belt under the lyctross, but don't tighten it immediately. Place the glass in the right position, check if the sling is twisting. Only then do the final puff. For screw clamps, the procedure is similar, but requires the use of a tool.
After installation, be sure to check the reliability of the fixation by applying a force in different directions. Make sure that the holder does not dangle or move spontaneously along the lyctross.
☑️ Installation verification
Operation and maintenance of fishing equipment
Proper care extends the life of any gear. After every fishing, especially in salt water, the holder must be rinsed with fresh water. The salt, when dried, becomes cryalized and can damage the machinery or fabric of the boat.
Periodically check the condition of the fasteners. Rubber seals And the pads lose their elasticity over time and need to be replaced, so if you notice any scab on the lyctross at the contact point, replace the pads immediately or change the attachment point.
Keeping the boat with the holders installed in the folded state is not recommended. It is better to dismantle the accessories so that they do not create pressure points on the fabric when the boat is rolled up.
Regular check of the condition of the lyctross in the places of attachment of equipment is the key to the safety and long service of your PVC boat.
Frequently Asked Questions (FAQ)
Can I attach the holder to the lyctross if the boat is already completely inflated?
Yes, you can. Liktros is designed to handle the loads that you create when you're tensing the side, but when you're mounting rigid clamps, it's best to lighten the pressure in the cylinder a little bit to avoid putting too much strain on the fabric at the point of contact, and then pump the boat back up.
Will the plastic holder withstand a large pike or pike?
A high-quality plastic holder made of reinforced polymer is quite capable of withstanding a jerk of fish weighing up to 5-7 kg. However, for trophy fishing and hard trolling, it is preferable to use metal models made of stainless steel.
How to prevent the holder from turning around the lyctross?
To do this, use models with two mounting points or an additional locking screw. You can also install two holders next to each other by connecting them with a lintel, or use special position locks on the sling itself.
Will frequent installation of the holder damage the structure of the lyctross?
When properly operated and used, soft-plate holders are not. The only danger is dirt and sand falling between the belt and the sling, which work like an abrasive. Keep the mounting site clean.