Fishing or resting on the water requires not only a reliable boat, but also competent equipment that allows you to use time as efficiently as possible.
If you own a domestic branded boat HighBoThe upgrade of its anchor system would be a logical step towards increased comfort, and buying an electric anchor with GPS anchor function is not just a tribute to fashion, but a way to automate the process of keeping the boat at a point.
In this article, we will discuss how to choose electromechanical anchorIt is compatible with Haibo boats, and is it worth paying for satellite navigation?
Advantages of an automated anchor system for Haibo boats
Traditional anchor rope and hand winch require constant physical involvement of the owner, which is especially tiring in high winds or currents.
Use of use electro-anchor It allows you to free the hands of the angler for other tasks, such as controlling the spinning or sounder, and the system itself controls the tension of the tile and, if necessary, tampers or selects it.
⚠️ Attention: Installing a powerful electric anchor on light inflatable boats requires careful displacement calculation so as not to disturb the stability of the vessel.
The key advantage of models with GPS module It's a virtual anchor, and it doesn't stand rigidly on one point, but it drifts within a given radius, which reduces the load on the hull and anchor cable.
For boat owners. HighBo This is especially true as the design of these vessels often involves use in shallow waters or in variable weather conditions.
- 🚀 Automatic coordinate retention to within a few meters.
- ⚡ Reduced physical load on the operator with frequent permutations.
- 🎣 The ability to catch alone without the need to constantly monitor the drift.
Thus, the investment in modern equipment is paid off by increasing the safety and ease of operation of the vessel.
The principle of operation of the GPS anchor and its compatibility
System system GPS anchors It's based on data from satellite receivers that are constantly tracking the position of the vessel, and unlike a conventional mechanical anchor that holds the boat by weight and ground hook, the electronic counterpart uses the thrust of the motor.
When the boat is blown by wind or current outside the virtual circle, the controller gives the command to steer. hybo usually required electric motor with a thrust corresponding to the weight of the boat.
It is important to understand that the “electro-anchor” itself can be implemented in two ways: as a separate winch with a smart controller or as a software function in the composition of the system. troll-engineThe second option is more popular and reliable today.
How does the retention algorithm work?
The algorithm constantly compares current GPS coordinates with given ones. When deflected by more than a given radius (usually 2-5 meters), the motor briefly turns on, returning the boat to the center of the zone.
The compatibility of the equipment depends on the voltage of the onboard network (usually 12V or 24V) and the type of mounting of the motor on the transom or in the bow of the boat.
Selection criteria: traction, length of the falt and type of control
When deciding to buy an electric anchor for a boat, you need to take into account several technical parameters that directly affect the efficiency of the system.
First of all, pay attention to tractionFor medium-sized boats (3.5-4.5 meters) with full crew and equipment, thrust in the range of 30-55 pounds will be optimal.
The length of the anchor tile or cable also matters, and standard models are equipped with a 30-60-meter cable, which is enough for most bodies of water. anchor-lining.
The type of control can be wired (through a humming wheel) or wireless (through a remote or smartphone). For fishing alone, wireless control is the only option for comfort.
| Parameter | Optimal value for HighBo | Impact on operation |
|---|---|---|
| Motor traction | 35-55 lbs | Ability to keep a point in the wind up to 5-7 m / s |
| Tension. | 12 volts. | Compatibility with standard boats |
| Length of cable | 40-60 meters | Fishing at depths up to 30 meters |
| Weight of the device | Up to 10kg | Ease of transportation and installation on the nose |
Do not forget to check the availability of protection against overheating and locking of the screw, as work in the grass or in shallow water is a common thing for owners of PVC boats.
Popular models and brands in the market
The market of water-motor technology offers many solutions, and choose motor-anchor Leaders in the low- and medium-budget, boat-suitable devices segment HighBoThese are Chinese and domestic brands.
Particular attention should be paid to models with markings Haswing and FlipsThese are often built-in or optional GPS modules, and they have good corrosion resistance and affordable prices.
- 🇨🇳 Haswing Cayman B - classic bestseller with the ability to upgrade to the GPS version.
- 🇷🇺 korad Russian developments adapted to our conditions and frosts.
- 🌏 Watersnake - reliable motors with good point retention functionality.
⚠️ Note: When buying, pay attention to the country of assembly and the presence of an official warranty, since the market is saturated with replicas of low quality.
More expensive options from Minn Kota The Terrova series offer unrivalled GPS anchor accuracy, but their cost can be prohibitive for entry-level boats.
For most owners of boats Haibo optimal solution will be the “golden mean” – engines of the middle price segment with the ability to connect an external GPS receiver.
Instructions for mounting an electric motor on a HighBo boat
Installing equipment on the boat requires carefulness and adherence to technology so as not to damage the cylinders or transoms. Before starting work, make sure that all tools are at hand and the battery is fully charged.
The installation process usually involves fastening the lower unit to the transom or bow, installing a rod and connecting the electrical part. For boats with a hard transom, there are no problems, but inflatable models may require installation. coatboard.
☑️ Checklist before installation
It is important to set the depth of the propeller correctly. The optimal distance from the propeller to the surface of the water is 15-20 cm statically to avoid cavitation and air capture.
Electrical connections must be carefully isolated using shrinkage and sealant, as ingress of moisture on the contacts will lead to oxidation and loss of power.
Setting up a point retention system (GPS Anchor)
After physical installation, the calibration and adjustment of the software is a critical step in how well the boat will stand still.
First, you have to wait for the GPS receiver to start cold, and in clear weather it takes 1-2 minutes, in cloudy or in the woods, it can increase, and the indicator on the romela or remote control will show the number of satellites.
To activate the anchor mode, you usually need to press and hold the corresponding button, and the boat will fix the current coordinates as a central point.
Activation sequence (example):1. Turn on the engine.
2. wait for the GPS indicator to flash.
3. Press the "Anchor" button.
4. Release the control handle.
Some systems allow you to adjust the radius of the drift circle, for fishing in a trunk, it is better to set a minimum radius, and in open water it can be increased to save battery power.
Maintenance and care of electrical mechanics
To buy an electric anchor lasts a long time, it requires regular maintenance, especially after operation in salt water or muddy water bodies.
After each fishing, it is recommended to wash the lower unit with fresh water, removing sand, silt and residues of algae. Pay special attention to mobile compounds and rods.
Once a season, check the condition of the engine brushes (if the motor is not brushless) and lubricate the bearings, and check the integrity of the insulation of the wires going to the battery.
Store the device better in a vertical position in a dry room, removing from the boat to avoid deformation of fasteners and transom.
Frequently Asked Questions (FAQ)
Can you install a GPS anchor on a boat without a built-in sonar?
Yes, you can. The GPS anchor system is autonomous from the sonar, but having a GPS cartplotter or sonar makes it much easier to visually monitor drift and adjust the holding radius.
How long does the electric motor work in anchor mode?
The battery life depends on the capacity of the battery and the wind strength. In the point retention mode, the motor operates pulsed. A standard 100 Ah battery lasts for 6-10 hours of continuous operation in moderate conditions.
Will the HighBo Boat's transom carry the weight of an electric motor?
The transverses of Haibo boats are usually reinforced with plywood and designed for outboard motors. Electric motors are lighter than gasoline counterparts, so there should be no problems with installation on a standard transom, if the carrying capacity is observed.
Do I need to register an electric motor in GIMS?
According to the current legislation of the Russian Federation, registration with GIMS is required for boats with an engine capacity of more than 8 kW (about 10 hp). Most electric motors have a capacity of up to 2-3 kW, so registration is not required for them, but the rules may change, follow the news.