The modern marine engine industry is undergoing a quiet but confident revolution, led by environmentally friendly power plants. Among the many brands offering an alternative to noisy and smelly gasoline units, the company is a leading manufacturer of the world’s largest and most innovative electric vehicle. Greenworks It deserves to take a leading position due to the availability and reliability of its solutions. Greenworks outboard motor Today it is not just a toy for small inflatable boats, but a full-fledged traction tool that can provide comfortable movement on the water for considerable distances.
Electric traction is growing not only among avid environmentalists, but also among practical anglers and hobbyists. The absence of the need to carry canisters with fuel, mix gasoline with oil and breathe exhaust fumes makes the transition to electric traction logical. In this article, we will examine in detail the model range, technical nuances and real opportunities that give the owner. motor-boat from this manufacturer.
It's important to understand that choosing an electric motor requires rethinking your floating boat habits. Greenworks It's going to offer you a very different philosophy, which is silence, smoothness and no vibrations, but in order for the technology to last, you have to strictly follow the rules for charging and storing lithium-ion batteries, which we'll talk about in the appropriate sections.
Key Benefits of Electrical Traction Greenworks
The main trump card of the brand is the use of advanced battery technologies, in particular, platforms. G-MAX 40V and 80VThese systems not only provide high power efficiency, but also have intelligent overheating and overload protection systems. Unlike the lead batteries of the past, modern batteries are also highly efficient. Greenworks compact, lightweight and do not require maintenance throughout the service life.
Not having to maintain an engine is not just a marketing ploy, it's a real saving of time and money for the owner. You don't have to change candles, clean the carburetor, drain the oil, or worry about the fuel losing its properties during winter storage. Electric motor It is launched instantly in any weather, even in severe frost, when gasoline analogues can be capricious.
⚠️ Warning: Despite the moisture-proof design, it is strictly forbidden to dive the engine power unit deeper than the instructions (usually the level of lower unit), which can lead to water entering the electronics compartment and irreversible failure of the device.
Another important aspect is environmental friendliness. greenworks outboard motorYou don't pollute the water with oil, you don't create noise pollution that scares the fish away and makes it difficult to enjoy nature, and this is especially true for fishing, where silence is the key to successful fishing.
- 🔋 High energy efficiency of series batteries G-MAX It allows you to travel up to 20-30 km on a single charge, depending on the model of the boat and the mode of operation.
- 🔇 The noise level of the electric motor is almost invisible against the background of natural sounds of nature, which is about 60 dB against 90 + dB in gasoline analogues.
- ⚖️ Much less weight compared to gasoline engines of similar thrust simplifies transportation and installation on board.
Overview of model range and specifications
The range of the company is quite wide and covers the needs of owners of various floating crafts. 40VThey are ideal for small PVC inflatable boats up to 3 meters long and weighing up to 300 kg. They are compact, lightweight and designed for quiet movement on small ponds or rivers with a weak current.
For more serious tasks, such as anti-current movement or use on metal boats and boats, a line is designed 80VThese units have a significantly higher torque and can reach speeds of up to 10-12 km / h, which is comparable to gasoline engines with a power of 2.5-3 hp. Engine power in these models is regulated smoothly, which allows you to accurately select the mode of travel.
All models are equipped with a telescopic rumble handle, which allows you to adjust the height of the control for the height of the operator. lower unit is made of durable composite materials and stainless steel, which provides resistance to corrosion in fresh and salt water. An important parameter is the number of available speeds: usually 5 front and 2 rear, which gives flexibility in maneuvering.
| Model | Tension. | Max. speed (km/h) | Weight without battery (kg) | Recommended boat length |
|---|---|---|---|---|
| Greenworks 40V | 40 volts. | 6 | 7.2 | 3.0m |
| Greenworks 80V | 80 volts. | 11 | 10.5 | 4.5 m |
| Pro 80V (23") | 80 volts. | 13 | 11.8 | 5.0m |
It is worth noting that screw Most models are made of a composite material that bends when hitting an obstacle, but does not break the engine shaft, which significantly improves reliability when driving in shallow water or overgrown areas.
Rules of operation and care of the battery
Your durability Greenworks It depends on how you handle your power supply. Lithium-ion batteries are sensitive to storage and charging conditions. Never leave the battery completely discharged for a long time, especially in winter. The optimal charge level for storage is 40-60%.
Charging should be done only with the original charger at room temperature. Trying to charge the frozen battery immediately after skidding from the cold can lead to irreversible chemical processes inside the cells and reduce capacity.
Always remove the battery from the motor after fishing, even if you plan to keep the boat in the garage for a couple of days, and this will prevent self-discharge through the engine control system.
Check the contacts on the battery and in the engine compartment regularly for oxidation. When salt deposits appear (if you have been fishing at sea), they must be carefully removed with a soft dry cloth. lubricant Contacts are prohibited as this can disrupt electrical contact.
- ⏱ Do not allow a full discharge "to zero" during operation - this critically reduces the battery life.
- 🌡 Avoid storing batteries in direct sunlight or near heating appliances.
- 💧 Wipe the battery case with a wet cloth after contact with salt water, but do not wet the connectors.
Comparison with gasoline analogues
When choosing between gasoline and electricity, many water-powered motorists conduct a thorough cost-benefit analysis: a 2.5 hp petrol engine consumes about 0.8-1 liters of fuel mixture per hour. When used intensively, a significant amount of money per season, not counting the cost of oil and gasoline. Electricity It costs many times cheaper: a full battery charge, providing several hours of travel, costs a penny.
But the limitations are not ignored, because the gasoline engine gives you autonomy, limited only by the volume of the tank, which can be replenished in 5 minutes in any community. Electric motor It requires an electrical network to charge, which in the wild can be a problem without an additional generator or solar panel. The charging time of a standard battery is 1.5 to 3 hours.
Hidden savings
Many forget to consider the cost of maintaining a gasoline engine. Substituting candles, cleaning the carburetor, replacing fuel filters and repairing the starter are annual costs that the owner of Greenworks completely lacks.
Vibration and noise are another factor: a gasoline engine, even a new one, vibrates and warms the operator's legs; the electric unit works perfectly smoothly; for a fisherman who sits in a boat for hours, no vibration means less fatigue in his back and legs by the end of the day.
⚠️ Warning: When switching from a petrol engine to an electric one, be sure to check the status of your boat's transom mount. Despite being lighter in weight, electric motors may have a different mounting geometry, and the old bracket may not fit without rework.
Preparation for the season: the checklist of the owner
Before you first go out after winter storage, you need to do a series of preventive measures, which will take no more than 15 minutes, but will save you from trouble away from shore, first inspect the lower unit for cracks or damage from winter storage.
☑️ Pre-season checks
Pay special attention to the lifting and turning mechanism. Although electric motors don't have oil in lower unit, mechanical hinges require cleanliness. Remove the sand and dirt that may have gotten inside during storage. Check the charge indicator: when turned on, it should show the current energy level.
If you use the motor in salt water, after each fishing, it is recommended to lower the lower unit into a fresh water container and turn on the motor for a few seconds, which will help to wash the salt from the internal channels of the cooling system (if it is designed) and from the surface of the screw.
Regularly checking the tightening of the screws mounting the rods is a guarantee of safety. Vibration on the move can gradually weaken the connection, so check it before each engine start.
Frequent malfunctions and methods of their elimination
Despite the reliability, the equipment can fail. Most often, users are faced with a situation when the engine does not start. In 90% of cases, the problem lies in the battery: it is either discharged, or not fully inserted into the compartment, or the contacts are oxidized. Check the indicator on the battery - if it flashes red, you need to charge or replace the element.
If the engine is buzzing, but the propeller is not rotating or rotating sluggishly, perhaps an algae or a line has wound on the shaft, in which case you must immediately turn off the engine and clean the propeller. Trying to push the obstacle with gas will overload the electronics and cause the protection to work or the fuse to burn out.
Extraneous noise during operation may indicate damage to the screw or hitting a solid object (stone) into the skin. Composite screw If you hit it hard, it can crack, causing imbalance and beat, and visual inspection of the screw before each season is mandatory.
- 🛑 The motor turns off by itself, either by heat protection or low voltage protection, let it cool down or replace the battery.
- 🔌 The error indicator flashes a certain number of times - check the instructions, this is the code of a specific malfunction.
- 🌊 Getting water inside requires immediate drying and checking the sealability of the ossels in the service center.
Summary and recommendations
Choosing. GreenworksYou choose comfort and a modern approach to water walks. This is ideal for those who appreciate the silence on the water and do not want to waste time on maintaining the internal combustion engine. For owners of small boats and boats, up to 5 meters of power in 80 volts will be more than enough for confident movement.
Remember, the battery is the key to the system. Investing in an extra battery pack can double or triple your range, turning an electric motor from a short run to a full-fledged long-distance motor. Keep an eye out for the battery line as technology is constantly improving.
Can Greenworks Motors be used in salt water?
Yes, Greenworks motors are corrosion-resistant and can be used in salt water, but after each outing, you must thoroughly wash your lower unit with fresh water to prevent salt crystallization and metal elements from corrosion.
How long does the motor last on a single charge?
The battery life depends on the battery capacity (Ah), the load on the screw and the speed chosen. On average, at the 5th speed (maximum), the 4 Ah battery will last about 40-50 minutes, and at 2-3 speeds (cruising mode) - up to 2-3 hours.
Should I change the oil in the Greenworks outboard motor?
No, Greenworks electric outboard motors don’t have oil in the lower unit or crankcase of the engine, as there is no rubbing mechanics that require an oil bath, as in the ICE. Maintenance is reduced to cleaning and lubricating the movable hinges.
Which screw is better: standard or metal?
A regular composite screw is optimal for most tasks, because it's safe to hit. A metal screw only makes sense if you walk around the algae-covered areas where the plastic is wound, but it increases the risk of damage to the shaft when hitting a rock.
Are Greenworks batteries compatible with other brands?
No, Greenworks batteries have a unique seating shape and contact system, and are only compatible with Greenworks’ 40V or 80V technology, and are not suitable for other manufacturers’ tools without special adapters, which are not recommended.