Jig fishing with a swimming aid opens up opportunities for the spinner that are not available to the coasters. You get access to deep pits, distant from the shore brows and complex terrain, where a large predator often stands. However, this method requires not only the possession of gear, but also the ability to manage the boat competently, which becomes a critical factor in success.
Many newcomers make the mistake of thinking that having a boat automatically guarantees catch. anchorageThe choice of sounder and understanding of the structure of the bottom are crucial, and in this article we will explore the technical aspects of preparation and tactical nuances that will turn your fishing from chaotic casts into a systematic search for trophies.
Spinning tooling for boat jig
The choice of fishing rod for fishing from the side is radically different from the shore spinning. You do not need long blanks that will cling to the sides or get confused in the wind. The optimal length of the rod is from 1.8 to 2.1 meters, which provides maximum control over the bait and ease of catching. Short form allows you to make sharper cuts, which is critical when fishing at depth using wicker cords.
The spinning test must be suitable for fishing conditions, but have a margin of safety. For most water bodies in the middle strip of Russia, the universal solution will be the range of 10-40 grams. This allows you to work comfortably with both light silicone vibrotails and heavy foam fish on a strong current. structure rods: for the classic jig, fast or extra fast is ideal.
The coil must be reliable and have a high-quality friction. The 2500-3000 spoole size according to Shimano classification will be the middle ground. gear-rateThis will allow you to quickly exhaust the fishing line when moving from point to point, saving the time of the fisherman.
Use a bright colored wicker cord – it is better visible in water, which allows you to visually control the tension and the moment of biting even at great depths.
Don't forget the fittings. fastener And the turntables minimize the risk of trophy cliffs, and the cheap elements can be buckled under the weight of a large pike or perch, and then the fight will not end in your favor.
Boat Preparation and Proper Anchorage
Safety and efficiency of fishing begins with proper preparation of the boat. Before getting on the water, make sure that the transom angle of the motor is adjusted correctly, and the anchor shaft is free of scuffs. For jig fishing, it is critical to be able to fix the boat above the fishing point without creating unnecessary noise and splashes.
There are two main ways to position a point: one anchor and two anchors (stretching). A single anchor is suitable for calm water, but in the current or wind the boat will turn around, which prevents accurate wiring. Stretching allows you to lock the side parallel to the brow, providing the perfect trajectory of throw.
Use of use anchor-buoy It's a requirement for fishing on a rocky bottom or in a trunk, and it allows you to release the anchor silently and quickly by pulling a special pellet, which saves nerves and time. If you're fishing on the stream, always stand up with your nose against the flow of water.
☑️ Checking before getting on the water
An important element of the modern jigmaker is motorIt allows you to silently adjust the position of the boat, throw to a promising driftwood or maneuver between bushes without scaring the fish with the splash of oars or the operation of the gasoline engine.
Tactics of searching for a predator with the help of a sonar
Modern fishing is unthinkable without a sonar, and it becomes the eyes of the fisherman under the water, and the main task is not just to see the fish, but to read the bottom, and you should be interested in the dramatic changes in depth, in the dumps, in the hills, and in the local highlands in the depths, called navels.
When scanning the water area, pay attention to the structure of the bottom. The solid bottom often looks like a clear, thin line, while soft silt gives a blurry, wide signal. The pike prefers hard areas, while the pike can stand in thickets of grass or on the border of silt and shell.
How to distinguish fish from snags on the screen?
The fish is usually elongated in shape and moves when scanned, and the snag looks like a static object with an echo tail extending deep into the bottom, and does not change position when re-passed.
Use the function zoom And you can see the bottom layer in detail, and often the predator is not above the bottom, but in the hollows, and without zooming, it can be mistaken for interference. DownVision or similar structural scanning techniques to obtain a picture close to a photographic image.
| Type of relief | Potential predator | Recommended wiring | Depth of fishing |
|---|---|---|---|
| Sharp dump (brow) | Sudak, Bersh. | Classic step | 4-12 meters |
| Grass plateau | Pike, Perch. | Uniform or twittering | 2-5 meters |
| Reverse current pit | Catfish, Big Punk. | Driving down the bottom | 8-15 meters |
| Local elevations | Jerech, Perch. | Aggressive stepping stone | 3-7 meters |
Basic techniques of wiring from a boat
The boat fishing dictates its conditions for wiring. Because the angle of entry of the cord into the water is more vertical than from the shore, the amplitude of the rod stroke may be smaller. The classic step remains the king of jig fishing. It is performed in a series of 2-3 turns of the coil, followed by a pause until the bait falls to the bottom.
For passive predators, it works well. dottedIn this case, the bait doesn't come off far from the bottom, but only jumps slightly in place, and this is achieved by short, sharp movements with the tip of the spinning without rewinding the fishing line, a method that often works when catching a pike in the back of the woods or during periods of low pressure.
And you also have to drag it, and a heavy jig head or a cheburashka with a tinfoil just drags down, lifting a cloud of mud, and it provokes the predator to attack, triggering a reflex of food competition, and it's important to feel every contact of the cargo with the bottom through the rod form.
The secret to success is to experiment constantly, and if the fast wiring doesn't work, slow it down. If there's no bites on the fall, try aggressively pulling away from the bottom.
When you're fishing on the current, use the power of the flow of water, and sometimes you just lower the bait and let it play on the tension of the cord, making only slight rod swings, which is called "catching in the eye" or demolition, and it's incredibly effective for a bearsh and a small perch.
Choosing baits depending on the conditions
The jigita arsenal should be varied. Silicone vibrating tails and twisters are the base. For deep places with strong current, choose models with an active tail that starts even with slow wiring. The size of the bait ranges from 2 inches for perch to 5-6 inches for trophy pike.
Furfish are secret weapons by perch, and as a positive buoyancy, they stand upside down at pause, which often provokes an attack. attractantsIn murky water or at night, fluorescent baits work perfectly.
The bait mounting also plays a role. The offset hook is indispensable in strong places, allowing you to jig through the snags without hooks. For a clean bottom, you better use open hooks with a long forearm for better sequencing. The weight of the loader is selected empirically: it should provide clear contact with the bottom, but not lie dead weight.
The color of the bait is secondary, but important. Put natural tones in the sunny clear water: machine oil, green pearl, Coca-Cola. In cloudy weather or in murky water, the "acid" colors work: salad, bright orange, matte white.
⚠️ Attention: When fishing for foam fish, the hooks are often vertically upwards, and be extremely careful when catching and removing the hook from the mouth of the fish, so as not to injure yourself or others in the boat.
Safety and equipment of fishermen
Boat Fishing is not only a pleasure, but also an increased responsibility. Having a life jacket is a must, even if you swim perfectly. Cold water, a tangled cord or a sharp roll of a boat while catching a large trophy can lead to tragedy in seconds.
The organization of space in the boat is critical. All gear should be in accessible but fixed places. The yawning, extractor, kukan and sucker should be at hand, but not lying on the floor where you can step on them. Use special organizers and magnetic holders for tools.
Weather conditions can change instantly. Keep a raincoat and warm clothes in reserve, even if the sun was shining in the morning. The wind in the big water increases by lunch, and being in a rainstorm for several hours without protection is a sure way to get sick and ruin the fishing experience.
⚠️ Attention: Never leave the anchor shaft wound on your arm or leg when you lower your anchor. A sharp snatch of the boat or anchor for bottom obstacles can lead to serious injury or drowning.
Don't forget about polarized sunglasses, which not only protect your eyes from the ultraviolet light reflected off the water surface, but also allow you to see underwater objects, which is especially useful when maneuvering among driftwood or grass.
Frequent errors in fishing from the boat
One of the most common mistakes is excessive noise. Fish, especially large ones, hear blows on board, anchor chain clanking and loud conversations. Try to move smoothly, use soft metallic plates and speak quietly. Silence on the water often brings more bites than the most expensive bait.
Another mistake is ignoring the side wind, and when fishing on deep brows, the wind can quickly blow the boat down in shallow water, scaring the fish at working depth, constantly monitoring the position and, if necessary, working with the engine or adjusting the anchor stretch marks.
Many fishermen forget about the slash-truckAt depths, especially with stretchable braids or fluorocarbon, the cutoff must be powerful and amplitude to penetrate the hard jaw of a pike or pike. Shy brush movements won't help here.
⚠️ Attention: Avoid beards and cord crosses when thrown from a boat. In a confined space, a tangled wicker can instantly wind itself onto the engine screw or confuse the angler, creating a dangerous situation.
FAQ: Frequently asked questions
What is the minimum set of equipment needed to start fishing from a boat?
To start, you will need: a reliable boat (PVC or metal), an anchor with a phala (at least 10-15 meters), a spinning reel, a set of jig baits and loaders, and a sonar. Without a sonar, fishing on an unfamiliar reservoir turns into a lottery.
Why is it worse from the boat than from the shore?
Often it's noise or misposition of the boat, and if the shadow of the boat falls on the fishing point, or if the anchor falls with a loud splash directly on the head of the fish, the peck stops, and it's also important to get the weight of the cargo right for the depth.
Can I fly a boat without a motor?
Yes, you can. A rowboat even has the advantages of being completely silent, but you'll have to rearrange anchors more often or use an anchor slut, which requires good physical shape, and for large depths and currents, rowing can be difficult.
What kind of jig to choose from a boat?
Optimally use a wicker cord with a diameter of 0.12-0.16 mm (Japanese classification #1.0-#1.5). It has high tensile strength and minimal extensibility, which gives excellent sensitivity at depths of up to 15-20 meters.