Fishing breams on the ring is one of the most efficient and efficient ways to capture this cautious fish from the boat, based on the principle of constant feeding of one point where the fish descends the feed plume and finds the hook with the bait. Unlike coastal fishing, where the distance is limited by the range of throwing, the boat allows you to stand exactly above the perspective hole or brow, providing a vertical feed of equipment.
The essence of the technique is to use a heavy feeder that holds the fishing point, and a sliding loader-ring moving along the feeder cord. Breeze The fish is schooling and bottom, so the concentration of feed in one place collects large fish from all around the area, and the correct organization of the process allows you to fish even in strong currents, where other methods often prove to be powerless.
The success of the event depends not only on the presence of fish in the reservoir, but also on the competent preparation of equipment. You need to take into account the strength of the current, depth, structure of the bottom and weather conditions. Mistakes in choosing the diameter of the fishing line or the weight of the feeder can reduce all efforts to zero, so the assembly of gear must be approached with engineering precision.
Choice of boat and anchorage
For fishing on the ring ideal stable boats with a flat bottom or pontoons, as the angler needs to be comfortable with several fishing rods. PVC inflatable boats With a hard floorboard bottom or inflatable floor, NDNDM provides the necessary stability and quietness. Metal boats such as the Kazanka or Ob are also applicable, but require more careful handling so as not to scare the fish from hitting the board.
The key is the right anchor system. You'll need two anchors to securely hold the boat across the current. This position, called "traction," allows you to conveniently place the gear on the sides and avoid overlapping. Using one anchor often leads to the boat turning along the current, making fishing uncomfortable and dangerous.
It's important to consider the sailing of the boat. In high winds, even a small boat can shift from a point, disrupting the rig vertical. Anchor cord The angle between the bottom and the cord should be sharp enough to provide better holding capacity. For greater depths and strong currents, the weight of the anchors can reach 7-10 kg each.
Always use rope anchor lines instead of chains or thin cords. The rope cushions the boat's jerks on the wave and doesn't ring, transmitting vibrations to the board, which can scare away careful bream.
Design and installation of gear on the ring
The ring gear is structurally simple, but requires certain proportions. The main element is the ring itself, a heavy lead or steel piece weighing 40 to 100 grams that slides along the feeder cord. The ring is attached to a branch with a fishing line at the end of which is the hook. The length of this draw varies depending on the activity of the fish and the strength of the current.
The diameter of the main line is selected with the expectation of possible hook and the need for forced catching. Usually a monolesh with a diameter of 0.25-0.35 mm or a wicker cord with a burst load of at least 5-7 kg is used. Hooks. must be sharp and strong, preferably of thick wire, to withstand the nozzle in the form of a bundle of worms or a crawl.
The secret to mounting the ring
You can use a lead washer from a truck to make a ring, or you can mold it yourself, and the key is that the hole must be smooth, barbed, so that the feeder cord slides freely, but the ring does not fly off spontaneously. Some anglers make the ring removable with a slot, a spring or a Cambrian closing.
The classic tooling is this: a locking bead is put on the main line, then a vertebral, to which the hook is tied. Below the vertebral is installed another bead and the ring itself, which allows the hook to be turned upwards with a sting when cut.
Feeding tactics: choice of feeder and mixture
The efficiency of fishing depends on the quality and quantity of feeding. The feeding should be voluminous, mesh, so that the flow of water washes away the feed, creating a cloudy plume. The optimal volume is 2-3 liters, which allows you to lay the food supply for several hours of fishing without frequent climbs.
The composition of the mixture should be nutritious, but not saturating. Breeze You have to find food, but you don't have to eat enough, and it's based on millet, barley, peas, or corn, and you add cake, ground crackers, or specialty store attractants to create a fragrance cloud, and it's important that the fraction of the feed is appropriate for the size of the prey you're going to be getting.
| Mixture component | Function | Approximate ratio |
|---|---|---|
| Mold/Perlivka | Basic nutritional base | 50% |
| Peas (chopped) | Aromatics and large factions | 20% |
| Smoke/Makuch | Creating a plume and smell | 20% |
| Clay/Earth | Weighting and slowing of washing | 10% |
There's a nuance to filling the feeder, and if you put too many dusty ingredients in at once, the fish will come quickly, but just as quickly and get satiated or scared of a sudden change in the environment, it's better to make the mixture viscous, so that it is washed out gradually, for 30-40 minutes. On a strong current, clay or loam be sure to be added to the feeder so that the stream does not wash out the food instantly, but blurs it gradually.
☑️ Preparation for feeding
Finding a Promising Place and Depth
Bream prefers to stay at depths of 3 to 8 meters, choosing areas with a flat bottom or a gentle exit from the pit. The presence of a shell, sand tongues or clay tables is a great sign. Catching on dumps is often less effective due to the difficulty of holding tackle at one point and frequent hooks.
To find a place, use a sonar or a method of measuring the depths of lead weights. Pay attention to the color of the water: the transition from murky to clean water often indicates a change in the terrain or nature of the bottom. Current should be moderate; on too strong a stream, the feed plume is quickly carried away, and the fish does not have time to concentrate.
It's important to consider the direction of the wind. Bream is less careful when the wind blows into the shore, creating ripples that hide the silhouette of the angler and the boat. The pin and clear water require maximum camouflage and silence. A large bream rarely approaches a boat at depths less than 3 meters unless it is accustomed to the noise of the motors and the presence of people.
⚠️ Warning: Never anchor directly above the feeding site if the depth is small. The boat and the angler create shadow and noise that scares the fish away. The optimal way to get upstream is to get the feed plume under the boat and the hooks into the fish-hunting area.
Techniques of catching and catching trophies
The process of fishing begins by lowering the feeder to the bottom strictly vertically, the feeder cord is pulled and fixed on the side nod or coil, then the gear with the ring is lowered, the ring is put on the feeder cord and smoothly descends to the bottom.
The bream pecking on the ring is usually confident, but it can also be careful. Fish can rub the nozzle for a long time before swallowing the hook. The slashing should be short and sharp, but without excessive swing so as not to injure the fish or themselves. Rescuing is made by choosing a line used or rotating a coil, while the ring rises along with the line, sliding along the cord of the feeder.
When catching a large specimen, it is important not to let it go under the boat, where the line can get entangled by the anchor ends. You need to lift the fish smoothly, feeling its jerks. If the bream begins to resist, it is better to slightly relax the tension, let it swallow air, and continue sampling again. Use a lift is mandatory, since the bumper can damage the fish, and take the large bream with its hands slippery and dangerous (you can hurt yourself against gill stamens).
Frequent errors and security measures
One of the most common mistakes is to use too rough tooling: Breath, especially large, sees a thick line well in clear water; the other extreme is a line too thin to break against the shell or when caught by bottom obstacles; balance between strength and stealth is the key to success.
Fishing often forgets safety on the water. Ring fishing requires heavy loads and sharp hooks in a swaying boat. Sloppy traffic can lead to injury. Also, being in a boat without a life jacket, especially in windy weather or when fishing alone, is a gross violation of safety rules.
⚠️ Attention: When fishing on a strong current, keep an eye on the cord of the feeder. If it is cut by a passing log or ice floes, you will not only lose the feeder, but you may also confuse your gear. Always have a spare set of feeders and cords.
Another mistake is the lack of patience. Bream can come to a point 30-40 minutes after the start of active feeding. Frequently leaving the boat in search of the "best" place only scares the fish. If you stand on a promising depth and relief, let them feed.
Seasonal Features of Fishing
Ring fishing is most effective in summer and early autumn, when the water is warmed up and the fish is active. In early summer, after spawning, the bream actively feeds, recuperating. At this time it takes greedily and boldly. In the second half of summer and September, the pecks can become more capricious, requiring more delicate equipment and careful selection of aromatics.
Winter ring fishing is also possible, but requires a completely different training and equipment, including winter boats or ice-colding platforms, which goes beyond the classic summer fishing. In spring, before spawning, bream also actively feeds, but often stays in shallow water, where ring fishing from deep-sea pits may be less effective.
What is the optimal weight of the ring for 1 m / s?
For a 1 meter per second flow, the optimal weight of the ring is 60-80 grams. A lighter ring will be pulled aside, taking the hook out of the aft track, and too heavy can damage the feeder cord or bottom when falling.
Can I catch the ring at night?
Yes, night bream fishing is often even more successful than day fishing, as large fish feed at dusk, but it requires excellent knowledge of the place, good lanterns and maximum silence.
What kind of nozzle does a bream on the river like?
On rivers, breams prefer animal nozzles: a bunch of dung worms, a crawl, a spider. In some water bodies, a worm and barley sandwich works perfectly. Plant nozzles (corn, peas) work worse if they are not part of the main bait.