Every owner of a small craft sooner or later faces the issue of safe storage of their vehicle in the winter. State loading sludge The GPO is a specially equipped site where boats are protected and supervised by the authorities, which avoids theft, damage to property and the legal problems that often arise when stored in wild parking lots.
The procedure of putting on a sludge requires careful preparation and compliance with certain bureaucratic formalities. GIMS MOE It sets out clear requirements for the technical condition of the vessel and the package of documents to be submitted, and ignoring these rules may lead to refusal of acceptance of the vessel or the imposition of penalties in the future.
In this article, we will discuss in detail all the stages of registration, necessary documents and nuances, which are often forgotten even by experienced boat owners. Proper preparation It's going to save you time and nerves, and it's going to keep your property safe for the duration of the parking lot, so let's figure out what to do first.
What is GPO and why is it necessary?
GPO is an acronym for state loading sludge, which is used for temporary storage of small craft, such sites are organized by local administrations or specialized organizations in agreement with the local authorities. GIMEThe main difference from private parking lots is the strict control and legal purity of the storage space.
The use of official parking lots allows the state to control the number of boats in the region and ensure their safety. PVC It's not going to be disposed of as mismanagement, and it's also going to eliminate the risk of conflicts with environmentalists or landowners.
⚠️ Warning: Keeping a boat outside of designated areas may be regarded as a violation of the rules of improvement, which will entail an administrative fine and forced evacuation of the vessel.
There are several types of sludge, varying in type of coating and level of protection. metal boatIt is important to specify the conditions of a particular GPO in advance, as the requirements for the preparation of a vessel may differ.
Required documents for registration
The first and most important step is to collect documents, and without a complete package of documents, the inspector cannot take your boat into custody. boat registration certificateIf the boat is not registered, you must first go through the registration procedure.
In addition to the boat registration certificate, you will need a passport of a citizen of the Russian Federation. In some cases, if the registration is not the owner, you need to notarial It is also worth preparing copies of all documents to speed up the process of filling out applications on the spot.
- 📄 Original and copy of the boat registration certificate of a small vessel
- 🆔 Passport of the holder or trustee
- 📝 Application for production in GPO (completed on the spot)
- 💰 Receipt for storage services (if advance payment is required)
If the boat is installed outboardThe motor must be inscribed as part of the boat's ticket or have a separate mark, and the absence of engine documentation can lead to the refusal of the entire set.
What to do if a boat registration certificate is lost?
If the boat's ticket is lost, you must first contact the GIMS to restore the document. Without a valid boat's ticket, it is impossible to put the boat in the GPO, since this is the main identification document. The recovery process can take up to 30 days.
Requirements for preparing a boat for wintering
Before putting the boat to the sludge, you need to carry out a number of preparatory work, which is not only a requirement of the GPO rules, but also a necessity to preserve the technical condition of your property. Conservation It helps to survive the cold without damage to the body and equipment.
First of all, you should thoroughly wash the case and dry it. Residues of silt, algae or dirt can lead to corrosion of the metal or destruction of the material. PVC For metal boats, it is recommended to inspect the hull for chipped paint and paint them.
If the boat has a motor, it must be preserved according to the manufacturer's instructions, usually by changing the oil, treating the internal cavities with corrosion-resistant compounds and fuel-flow The motor is often stored separately from the body, but within a single GPO cell.
☑️ Checklist for boat preparation
All removable elements, such as seats, deck coverings and awnings, are better removed and taken home. In an open parking lot, under the influence of ultraviolet light and temperature changes, the fabric can quickly become unusable. Leave on the boat only what can not be removed without disturbing the design.
The process of putting on a sludge: step-by-step instructions
Once you arrive, find the GPO administration or the GIMS post, the officer will check the availability of documents and the compliance of the vessel with the data in the boat's ticket. visualizationDuring which damage is fixed to avoid claims on return.
Once you've checked, you'll be given a receipt for storage, you can pay through a bank or terminal on the spot, and it's important to keep all the checks and coupons, because they're the basis for getting a boat in the spring, and without them, the delivery process can be very long.
| Phase | Action. | Time limit for implementation |
|---|---|---|
| 1 | Submission of documents and application | Day of circulation |
| 2 | Inspection and recording of condition | On the day of serving |
| 3 | Storage services | Up to 3 days. |
| 4 | Placement on the site | By agreement |
After payment and placement, the employee of the GPO will put the appropriate mark in the boat's ticket or issue a pass to the GPO. Check the correctness. The data that you put in is the boat number, the owner's name and the dates, and a single-digit error can create problems in the future.
Take photos of the boat in the parking lot from different angles immediately after the stage, this will be proof of her condition at the time of delivery and will help in controversial situations.
Storage costs and timeframes
Storage prices vary by region, type of vessel and length of period, and are generally approved by local authorities and valid during the navigation season. Payment It can be done monthly or throughout the season, which is often more profitable.
The standard shelf life is from October to May, and if you plan to pick up the boat early or leave later, you must notify the GPO administration. Extension is possible, but requires additional payment and re-registration of documents.
It should be noted that the cost can vary depending on the size. flyboat They charge less than metal boats with rigid hulls, and the presence of a trailer also affects them, sometimes they are paid separately for storage.
⚠️ Warning: Do not delay the payment of the extension of storage. Delay may lead to a charge of penalties or the recognition of the boat as ownerless, which will entail its withdrawal.
Getting a boat after wintering
In spring, before the navigation begins, you must again contact the administration of the GPO, show your passport, boat's ticket and all receipts for payment. grant.
When you get it, you get a re-examination, compare the condition of the boat to what you saw when you surrendered, if you find new damage that you didn't see in the fall, you get a deed right away, and that's the only way you can get compensation or get repairs at the custodian's expense.
After successful delivery of the boat, the boat's ticket is marked as despoiling, and now your boat is ready to be launched, and be sure to check the technical condition after winter: inspect the seams, fasteners and other mounts. graffiti before the first launch.
Getting the boat on time and checking its condition at the time of delivery is a critical step that protects your property rights.
Frequently Asked Questions (FAQ)
Can I leave a boat without a motor?
Yes, you can. You can keep the engine separately, at home or in the garage, and the GPO notes that the boat is delivered without the engine, so that the number of the boat's hull matches the data on the boat's ticket.
What happens if I don't pick up the boat on time?
If you do not pick up the boat and pay for the extension, it may be declared ownerless, in which case the GIMS has the right to initiate the procedure for the seizure and disposal of the boat through the court.
Do I need to flush air from the PVC tubes of the boat?
Yes, it is. When the temperature changes, the air in the cylinders expands and contracts, which creates excessive pressure on the seams, and it is recommended to flush the air partially or completely to avoid deformation.
Can I re-register the boat while it is in the GPO?
Yes, a sale or gift is possible, but the new owner will have to appear in person at the GPO to re-register the documents for storage and provide new information about the owner.