Boat Fishing: the skill of deep fishing

Boat Fishing opens up horizons for the spinner, which are not accessible to the coast. depth-browThe jig fishing from a boat is very different from the shore not only by the available points, but also by the very technique of execution, which requires the angler to constantly monitor the position of the vessel and the tackle.

Many beginners make the mistake of trying to copy coastal tactics, which often leads to empty cages. In deep water, a predator behaves differently, and to provoke him to attack, you need to competently combine work. sonarIt's this symbiosis of technology and fishing skills that allows you to consistently catch a trophy perch and a large pike, even during periods of bezelivya.

In this article, we will take a look at all aspects of boat jig, from location selection to wiring nuances, which will help you significantly improve the effectiveness of trips. Understanding the bottom relief and the ability to "read" it through the tip of the rod or the navigation screen is the key to success.

Selection and preparation of gear for boat jiging

The boat spinning kit has its own specifications, due to the need for vertical or steeply inclined depth fishing. You will need a rod with a fast or ultra-fast formation that allows you to feel even cautious fish pokes at great depth. The test range should correspond to the weight of the cargo used, which can reach 40-60 grams and above during the course and depth.

The coil must have a high-quality cord laying and a reliable friction mechanism, since the extraction from the depth often occurs in the vertical plane. The use of a wicker cord with minimal extensibility is a prerequisite for effective jig fishing, allowing you to transmit the slightest vibrations of the bait.

Monophile line In the classic jig, it is almost not used because of its high extensibility, which makes it impossible to cut high-quality at distances greater than 10-15 meters.

• 🎣 The rod: Length 2.10-2,40 m, test 10-60 g, building Fast or Extra Fast.
• 🧶 Cord: Tier #1.0–#1.5 according to Japanese classification (PE), color – bright for control, dark – for disguise.
• 🔗 Furniture: American-type fasteners and high-quality vertebrates for quick change of baits.
• 🎣 Coil: Size 2500-4000 Shimano, gear ratio 5.2:1 or higher for exhaustion rate.

⚠️ Warning: Don't skimp on rod bands. When using heavy loads and wicker cords, cheap inserts are quickly rubbed, which can lead to a trophy break at a critical moment.

Navigation and search for promising places with the help of a sonar

Modern fishing is unthinkable without the use of a sonar, which becomes the main tool for finding. Unlike coastal fishing, where the angler often acts at random or from memory, from a boat you can scan the bottom in real time. Your task is not just to find depth, but to find depth. bottom-line: dumps, navels, ditches and exits from pits.

When you're on a boat, it's important to be able to interpret the screen, and fish are often not at the bottom, but in the water column above the extreme depth difference, and the sounder allows you to see these "heat corridors" and clusters of small fish, around which the predator is sure to circle.

The solid bottom (stone, shell) often attracts a pike, while the pike prefers the edges of the thicket or the snag. Deep analysis of the depth map before fishing will help save time on the pond.

Using GPS in conjunction with the sonar allows you to mark promising points and return to them after passing a circle, this is especially true when fishing in large waters, where visually remember the place of the fish is impossible.

Proper anchoring and control of the boat's position

The quality of the fishing depends on how well and reliably the boat is installed, the wind and current are constantly demolishing the boat, and if you don't control the position, your boat is not going to be able to get out of the water. jighead There are two main ways of anchoring: one anchor (most often from the nose) and two anchors (stretch).

Stretching anchoring allows you to lock the boat sideways to the wind or current, which is ideal for catching extended brows. However, this method requires more time and two anchors. Single anchor is more often used when fishing at points (navels) or when there is a strong wind when you need to stand nose to wave for safety.

It is important to use an anchor tile of sufficient length - at least 3-4 times the depth at the fishing site. This ensures reliable engagement and the necessary tension angle. anchor-buoy helps to quickly get rid of the hook if the anchor settles in the snags.

When fishing on the current, the boat often turns around so that the throw becomes uncomfortable, in such cases, the use of an additional floating anchor (parachute) helps, which stabilizes the boat and prevents it from prowling from side to side.

Schemes of wiring and animation technique from a boat

The technique of wiring from the boat has its own specifics, because the angle of entry of the cord into the water is much steeper than in coastal fishing. The classic step is performed by 2-3 turns of the coil, followed by a pause, during which the bait plans to the bottom.

The boat often uses vertical jigs, where the bait is dropped almost vertically under the boat or away from it, and this allows you to catch steep dumps and snags, where hooks are inevitable when horizontally wiring, in which case the animation is based on rod tosses and sways.

Don't be afraid to experiment with pause size. If the classic step doesn't work, try to make the pause very short (1 second) or, conversely, prolonged (5-7 seconds), often the predator responds to the unusual behavior of the bait.

The diagram of the classic jig step:
1. Throwing and falling to the bottom (control by tension of the cord).
2. 2-3 turns of the coil handle.
3. pause 2-4 seconds (before touching the bottom).
4. Repeat the cycle.

It's important to feel the weight of the bait. porous silicone Or bulk lures, they're more likely to sail in the water, and they plan longer, and that's something to consider when you're choosing the weight of the cargo.

The secret to "shivering" wiring

Many anglers forget that during a pause, you can tremble slightly with the tip of the rod, which creates an additional vibration that attracts the attention of a passive predator, especially a perch, and the amplitude of movement is minimal, but the effect can be amazing.

Tactics of search and catching of deep brows

Finding fish at great depths requires a systematic approach, so you don't want to throw bait randomly in different directions, you can use the fan fishing method of a sector or you can use the isota to find one fish on the eyebrow, and you're more likely to find others, because predators are often standing in groups.

When fishing on long brows, use the shuttle tactic: stand upstream or in the wind, make a series of throws, then move 10-15 meters lower and repeat the series, which allows you to tap the entire perspective zone.

Pay attention to the time of day. At night and early in the morning, a predator can go out to the shallower areas of the brow, and during the day, slide into the deepest point. Flexibility of tactics and willingness to change places is the key to success.

Type of relief	Potential predator	Optimal wiring	Weight of the cargo (g)
A sharp dump (watering pit)	Sudak, Bersh.	Classic step	20-40
Smooth lift (language)	Pike, Perch.	Even with pauses	10-24
Bottom of the boat	Big pike	Vertical, short tossings	14-28
Deep-sea brow	A trophy pike	Long pause, dragging.	30-60

Remember the spots where the bait or snags occurred. Even if the fish is not detected, it is there, and after a while (or when the bait is changed), it can attack again.

Analysis of bites and extraction from the depth

A jig pecking from a boat often feels like a sharp hit or, conversely, like a sudden heaviness at the end of the cord. In deep water, due to water pressure and the length of the cord, the impact can be lubricated, so it's important to keep your finger on the cord for maximum tactile sensitivity.

If you detect stumps, but the absence of implemented bites, it is worth reducing the size of the bait or switching to a more delicate tool, for example, lead-mountSometimes the predator prefers to attack the bait on the fall, and here the speed of the angler's reaction when cut off is important.

Removing from the depths requires constant rod and reel work. Don't let the fish go into snags or into clean water where it can come down. Force the catching, but without fanaticism, so as not to tear the fish's lip, especially if you have a sharp hook.

⚠️ WARNING: When catching large fish, never cord your finger! the jerk of a strong fish can lead to serious brush injury or even loss of the phalanx.

Use a long-handed lift. Trying to pick up a large pike or pike with your hands, especially in a slippery boat, can cause not only fish to descent, but also injuries from predator teeth or hooks.

Frequent errors in fishing from the boat

One of the biggest mistakes is to neglect the sonar, and fishermen often just drop anchor and start fishing, not realizing that there's a flat plateau under the boat, and the fish is 20 meters away at the dump, and without understanding the topography, the fishing becomes a lottery.

Another common mistake is to use too rough gear "just in case." At depth, the rough tackle is more noticeable, and the sailing of a thick cord on the flow prevents you from doing good wiring. Balance of strength and delicacy - that's what you're looking for.

Also, many people ignore the noise, sudden movements in the boat, anchoring on the side, loud conversations, all this in shallow water or in clear water can scare away a cautious predator. Try to behave as silently as possible.

What weight jig head to choose to start with?

Weight depends on depth and current. For depths of 5 meters and a weak current, start with 10-14 grams. If a depth of 10 meters is a current, you need 20-28 grams. The main rule is that the load should allow you to make a high-quality step with a pause of 2-3 seconds.

Can you catch a jig without a sonar?

You can, but the efficiency is much lower. Without the sonar, you won't see the structure of the bottom and the fish, you'll have to rely on the topography of the shore (if it's nearby) and the pump method, which rarely gives a stable result at great depths.

Why don’t fish catch themselves from a boat?

There are several reasons: blunt hooks, too hard a cut (you pull the hook out of your mouth), or the fish is above the bottom and you punch it with a beard. Try using sharper hooks Owner or Decoy and make the cut a little softer, but more amplitude.

Which color of silicone works best?

There is no universal color. In clear water and bright sun, natural colors work (machine oil, green, purple); in murky water and deep water, you can see more acidic and bright colors (salad, orange, white). Always have a supply of different colors.