Inflatable boat operation in the Russian climate often faces the vagaries of the weather, when a sudden downpour or scorching sun can spoil the entire fishing day. The awning for the boat Vyatbot 390R It's not just an accessory, it's a comfort element that allows you to stay on the water even in bad weather, and this model, which combines inflatable tubes and a rigid solder floor, is ideal for a full-fledged running frame.
Owners often underestimate the importance of quality tents, considering them superfluous until they encounter wet gear or heat stroke. Properly selected protection allows you to expand the boundaries of navigation and make fishing or cruising really enjoyable. In this article, we will discuss in detail the nuances of the choice of materials, types of frames and features of installation for the model. Vyatbot 390R.
The market offers a variety of options, from budget Chinese counterparts to premium materials, and it is very easy to get confused in them. The key difference between high-quality awnings for Vyatbot is the accuracy of patterns, taking into account the geometry of the nose and the location of stringer cylinders. Ignoring this fact can lead to the fact that the protection will sail or let water in the most important places.
Why do you need a running awning for the owner of Vyatbot?
The main function of the chassis awning is to create a protected space above the cockpit of the boat, where the angler and his equipment are located. Vyatbot 390RThis is critically important, because fine water dust, raised by the wind, can soak clothes through the water in an hour if there is no reliable protection.
In addition to protecting against precipitation, the awning acts as a barrier against ultraviolet light, and prolonged exposure to the open sun in water where the reflectivity of the surface is high is dangerous to health. Dense tissue UV impregnation blocks harmful radiation, allowing the fisherman to remain active longer without the risk of getting burned.
Use light shades (gray, beige, light green) – they heat less in the sun, keeping inside the cockpit a more comfortable temperature than dark counterparts.
And also, windshield protection, which is very high speed, the oncoming airflow creates a lot of pressure that interferes with the control and is tiring, and the canopy frame takes that impact, creating a relative calm zone.
⚠️ Note: Do not use the chassis as a parking awning (transport) when parking on the water for long periods in a storm.
Types of PVC boat frames
The choice of the awning base determines its reliability, wind resistance and complexity of assembly. Vyatbot 390R The two most common types of design are arc and frame, each with its own advantages and disadvantages that must be considered before buying.
Arc frames consist of several arches inserted into pockets on the sides or attached to banks. They are lighter and more compact when folded, which is convenient for transportation. However, in strong lateral winds, such structures can whistle and require perfect stretching of fabric to avoid flapping.
Frame options made of duraluminium or steel pipes connected by nodes create a stiffer structure. They better hold the shape and allow you to install additional accessories, such as windshield or shelves. Vyatbot 390P A frame frame is often preferred because of the wide cockpit that requires reliable support in the center.
- 🛶 Arcs: They are fast gathering, weigh little, but are less resistant to strong winds.
- 🏗️ Frame: create a full-fledged "house", allow you to mount glass, but heavier and more scalable.
- ⚙️ Hybrid: combination of arcs and rigid racks, the optimal balance of strength and weight.
When choosing, also consider the way you attach to the boat. Some models require drilling cylinders to install glasses, which is unacceptable for many owners. You should choose options with belts that cover cylinders or special brackets that are installed in stringer sockets.
Materials: fabric and fittings
The durability of a chassis is directly dependent on the quality of the materials used. The basis of modern tent is polyester fabric (oxford) with polyurethane or PVC coating. For boat awnings, the density is considered optimal from 240 to 450 g / sq.m.
Special attention should be paid to seams. In quality products, all joints of fabric must be taped or boiled. Needle-strung seams without additional sealing will become leakage sites in the first serious rain. Vyatbot 390PWhere the spray can fly from all sides, this is a critical parameter.
Lightning fittings also play an important role: lightning should be large, with a double runner and be sure to have valves that cover the teeth from the water. Plastic elements become brittle in the cold, so metal or reinforced composite fittings are preferable. Fixing belts must be made of a sling with a minimum tensile coefficient.
| Parameter | Budgetary option | The best choice | Premium class |
|---|---|---|---|
| Tissue density | 190-210 g/sqm | 240-300 g/m2 | 420-450 g/sqm |
| Coverage | Single PU | Double PU | PVC + Teflon |
| Stitches | Strung up | Glued-up | Welded |
| Term of service | 2-3 seasons | Seasons 5-7 | 10+ seasons |
Features of installation on Vyatbot 390P
Installation of the running awning on the model Vyatbot 390R It has its own technological nuances, which are related to the structure of the solder floor and the shape of the cylinders, and it's best to do the installation process on a flat surface, before fully pumping the boat to the working pressure, and this will ensure the correct geometry and tension of the elements.
If you use a can-mounted frame, make sure that the support points are evenly distributed. Often you need to move the rear jar slightly forward or backward for the perfect fit of the arcs. In some cases, you may need to rework the mounts yourself, for example, installing additional soft linings of porous rubber to avoid damaging the fabric of the boat.
☑️ Pre-installing check
When you install a windshield, it's important to set the angle of inclination correctly, so that glass that's too vertical will create sailing and noise, and that glass that's too gentle will interfere with view and collect water at the base. Vyatbota It is approximately 45-50 degrees relative to the horizontal.
⚠️ Warning: When installing the frame, make sure that sharp fittings or arc tips do not touch the fabric of the boat under pressure. Use protective linings or insulation to insulate the contacts.
The final step is to adjust the tension belts, the fabric should be pulled like a drum, but without distortion, sagging will lead to accumulation of water and deformation of the frame when moving, and the pulling can damage the seams when gusts of wind.
Operation and care of the tent
To keep the awning running for a long time and not lose its protective properties, it must be properly cared for. After each fishing, especially if it took place in rainy weather, the awning should be dried before packaging. Wet fabric in a rolled state is the ideal environment for the development of mold, which destroys the impregnation and the structure of the material itself.
Cleaning from dirt and fish mucus should be done with a soft sponge using special means for PVC or a conventional soap solution. Aggressive chemistrySolvents and abrasive powders are strictly prohibited, as they can wash away the protective layer and change the color of the fabric.
Seasonal storage
Store the awning in a straightened or loosely rolled out in a dry, cool place. Avoid storage in tightly compressed bags at negative temperatures, this can lead to curtains.
Check the condition of the joints and fasteners regularly. If you notice divergent threads or scuffs on the belts, it is better to make minor repairs immediately than to face a problem on the water. Remakes complete with a boat are great for repairing small cuts on PVC fabric.
Modernization and useful improvements
The standard awning trim often leaves much to be desired in terms of functionality. Vyatbot 390P They often resort to upgrades, adding comfort-enhancing elements, and one of the most popular improvements is the installation of side curtains, which can be lowered or raised depending on the weather.
Also worth considering is the possibility of installing an inner pocket for trifles or mounting for the navigator and sonar directly on the tent frame, which frees up space in the cockpit and allows you to keep the appliances in sight. For night fishing, it will be useful to provide a loop for pendant lights inside the awning.
- 💡 Installation of LED tape around the perimeter of the frame for illumination of the cockpit.
- 🎣 Installation of holders for rods on the inside of the arcs.
- 🌧️ Suturing additional valves for water drain from the roof of the tent.
Another useful option is a windshield skirt along the lower perimeter of the awning, which prevents spray and cold air from entering the canopy, creating a thermos effect, which is especially important in the off-season, and you can make such a skirt yourself from the remnants of awning fabric.
Competent modernization of the chassis awning turns an open boat into a multifunctional boat suitable for fishing in all weather conditions.
Frequently Asked Questions (FAQ)
Can the 390P chassis be used as a parking awning?
It is not recommended to use a chassis as a permanent parking awning (for storing a boat on the street), the construction of the chassis is not designed for long-term static loads from snow or strong wind, and the fabric may not have sufficient protection from prolonged exposure to ultraviolet light without tension.
What speed does a boat with an installed awning develop?
The presence of a running awning increases sailing and aerodynamic drag. Vyatbot 390R With a medium-power engine (15-20 hp), the speed loss can range from 3 to 7 km/h depending on the shape of the awning and the strength of the oncoming wind, but the comfort of driving is greatly increased.
Do I need to remove the awning when washing the boat with water?
Yes, before washing a boat with high-pressure machines (Karcher and analogues), the awning must be removed. A jet of water under pressure can damage the glued seams, tear the fabric or damage the fittings. The awning itself should be washed separately, manually, with a weak water pressure.
Is the awning compatible with the installation of an electric motor in the nose?
Most of the running tents for Vyatbot 390P They have a cutout or design that allows the use of a bow motor, but if a powerful electric motor with a large leg is used, it may be necessary to modify the front awning valve slightly or use a transition plate.