And the organization of space on board is not just a matter of comfort, it's a prerequisite for a successful and safe fishing trip. When you're drifting or waiting for a bite on the current, your hands get tired of holding on to it. rod That's why getting the right spinning mount in a boat becomes one of the most important pieces of gear, just like an anchor or a life jacket.
A mismatched or poorly installed holder can result in the loss of an expensive projectile or even cause injury when a boat slams. Fishers often underestimate the importance of rigidity of fixation, relying on chance, but the water dictates its harsh rules. spinningLeft unattended or fixed "as if", easily swims overboard at the slightest wave or unexpected maneuver.
In this article, we will take a look at all the existing types of fixers, look at the nuances of their installation on different types of boats and answer the questions that arise for beginners. You will learn how to turn the side of your boat into a professional fishing machine, where each gear lies in its place and is ready for instant use.
⚠️ Attention: Never rely on makeshift rope or plastic bottle holders – they won’t withstand the thrust of large fish and can confuse tackles at the most inopportune moment.
The main types of holders for boats
The boating accessories market offers many solutions, and the choice depends on the design of your vessel and fishing style. Fixers They fall into several major categories, each with its own advantages and limitations, and understanding these differences will help avoid buying mistakes.
The most popular option is cupholderIt's a rod that crashes into the side or is mounted on the deck, and it's versatile and suitable for most types of rods, it provides a rigid grip of the rod and allows you to quickly extract the gear when you bite, but it requires drilling the hull, which is not always acceptable for owners of inflatable boats.
For those who value mobility, there are consignment note They're attached to the side cylinder or planshira with special clips or belts, and they're the perfect choice for you. PVC boatsThese mounts are easily removed and transferred to another location, which is convenient when fishing in a tight space.
- 🎣 Cutting glasses: They provide maximum reliability, but require installation with drilling of the body.
- 🎣 Overhead clamps: They do not damage the board, are easily transferred, but can be turned around under a strong load.
- 🎣 Universal bases: It allows you to combine different types of holders on a single platform.
⚠️ Attention: When choosing an overhead mount, make sure that the clamping material does not damage the PVC fabric or paint coating of the metal boat during prolonged contact and friction.
It is worth mentioning separately. horizontal These are the types of rods that hold the rod parallel to the water, which are a specific type of rod, often used in trolling or catching in windy weather, where the sailing of the gear interferes with the control of the boat, and these systems are more difficult to set up, but they give you a gain in control.
Manufacture materials and durability
Aggressive aquatic environment, ultraviolet light and temperature changes dictate strict requirements for materials. Plastic. (often ABS or polypropylene) is the most common material due to its lightness and corrosion resistance: high-quality plastic does not rust, is easy to wash and is inexpensive, but can become brittle in severe frost.
Metal mountings made of stainless steel It's very tough, it's very tough, it can withstand a lot of stress, it can't deform under the weight of heavy rods, but it needs to be maintained, because even stainless steel can become coated with plaque over time, and aluminum can oxidize when it comes into contact with other metals.
When choosing, pay attention to quality. fixing-pieceOften manufacturers save on bolts and screws using ordinary ferrous metal, which rusts after the first season. stainless-make Or brass, or if you replace it with a better one.
Secrets of care for metal fasteners
To extend the life of metal holders, regularly lubricate threaded joints with graphite lubricant or WD-40. This will prevent bolts from boiling and facilitate dismantling at the end of the season.
Rubber or silicone inserts inside the glass are critical, not only protecting the rod form from scratches, but also quenching vibrations that are transmitted from the motor or waves, and if the insert has lost elasticity and become oak, it needs to be replaced, otherwise there is a risk of damage. kool spinning.
Features of installation on different types of boats
The mounting process depends on the material that makes your boat, and owners of metal and fiberglass vessels are more fortunate to use cut-in methods without restrictions, and all they need to do is to find the right place to keep the structure strong and to ensure easy access to gear.
S floatboat The situation is more complicated. It is absolutely impossible to use methods that involve leakproof cylinders. Installation is carried out exclusively on external elements: transmolets, stringers (if they are rigid) or special sites glued to the cylinder by the manufacturer. Any self-drilling of the cylinder cancels the warranty and creates a risk of flooding.
When installing on the transom, it is important to consider vibrationIf you attach the holder too close to the lower unit, the spinning will constantly shake, which can cause fish to descent or entangle the fishing line, the optimal distance is at least 30-40 cm from the axis of the motor.
☑️ Pre-installing check
For fixation on soft elements are often used sling It's important to make sure that they don't rub against the side when they're moving, and using extra gaskets made of foam material will help reduce friction and protect the side of the boat from wear.
| Type of boat | Recommended type of attachment | Mode of installation | Risks. |
|---|---|---|---|
| PVC (inflatable) | Invoice, strap-on. | Fixing to a stringer or transpant | Balloon damage, slippage |
| aluminum | Injurious, bolt-like | Drilling, rivets or bolts | Corrosion around the hole |
| Fiberglass | Sorting, gluey. | Drilling with sealing | Cracks in improper drilling |
| Wooden | Loady, clamps. | Scoops, bolts. | Rotting of the tree around the fastener |
Safety and prevention of loss of gear
The main function of the holder is not just to free the hands, but to keep the tackle. Losing a spinning from a boat is not only financial damage, but also a potential environmental problem if the hooks are left with wobbles or glitters. A reliable mount must withstand not only the weight of the rod, but also the jerk when you cut it, if you hold the tackle in your hands, and then sharply lower it.
Use it. tether It's a thin cord that is attached at one end to the ring on the spinning wheel, and at the other end to the ring on the boat itself or the holder, and even if the rod jumps out of the glass, it stays on board, and this is especially true when fishing large fish when the struggle is at its limit.
⚠️ Attention: Never leave the rod in the holder with an open friction or, conversely, with the brake tightened tightly - this can lead to a break in the coil when the boat suddenly jerks about the wave.
The location of the holders also affects security. anchor-flyIn a critical situation, such as when the motor is hooked against the grass or net, the angler must be able to maneuver quickly without looking at the fishing rods in the glasses.
Check the status of the locks before each release, the plastic could crack from the cold in winter, and the metal - weakened from vibration. Optimal inclination angle The glass is also important: too vertical position will increase sailing, and too horizontal may not allow you to make a normal cut.
Use bright stickers or tape on top of the holder – so you will always see its location, even if it is underwater or in the shade of the board.
Homemade solutions and tuning
Many experienced anglers prefer to make their own mounts, customizing them to the specifics of their boat, which saves the budget and gets exactly what you need. Often, PVC pipes, remnants of aluminum profiles or even parts from old furniture are used, the main thing is to adhere to the principle of strength.
A popular solution is the use of plumbingA corner or tee of the desired diameter can be easily fixed on the plantain of a wooden boat, inside such a homemade glass is better pasted with a porous material (polyurethane or neoprene foam) to soften contact with the form.
For lovers of minimalism, there are options for fastening directly to bank With a rod or a powerful clamp, the holder is fixed to the end of the seat, which is convenient because when the angler changes position, he rearranges the seat with the gear, without wasting time on the outweighing.
- 🛠 PVC pipe: Cheap and affordable material, easy to process and glue.
- 🛠 Aluminum profile: Light and durable, ideal for frame homemade.
- 🛠 3D printing: a modern way to create a holder of any complex shape for a specific model of the coil.
When tuning factory models, they often change their regular screws to longer ones or add rubber pads, and you can also paint the holder in the color of the boat or, conversely, in a bright signal color so as not to lose it overboard. The fishing fantasism here is limited only by common sense.
Homemade mounting is not inferior to factory, if high-quality materials are used and installation technology is observed, but requires careful check before the first release to the water.
Care and storage in the off-season
Proper care of accessories prolongs their life and preserves the appearance of the boat. After every fishing, especially in salt water, the fasteners must be washed with fresh water. The salt, when dried, forms crystals that can scratch metal and break down the structure of the plastic.
In the winter, plastic and rubber elements are better dismantled and put in a warm room. polymer They become brittle, and an accidental impact can split the glass. Metal parts, if they remain on the boat, are recommended to be smeared with conservation grease.
Check the threads. If you notice that the bolt has gone or the thread has broken, it is better to replace the fastener or drill a new hole than risk losing the gear. Regular maintenance is the guarantee that in the high season you will not let down a small change.
How to clean the holder from rust and plaque?
To clean, use a soft brush and vinegar solution or a special rust removal agent. Do not use abrasive powders that can scratch the surface. After cleaning, be sure to apply a protective layer of lubricant or polish.
Can I use car holders for glasses?
Theoretically, you can adapt the mount, but car holders are not designed to be in constant contact with water and can rust quickly, and their fixation mechanism is often too weak for powerful marine or river spinning.
What is the diameter of the glass considered standard?
The standard diameter is about 45-50 mm, which is suitable for most spinning alloys, but for powerful sea rods or, conversely, light ultralights, holders with variable diameter or interchangeable inserts may be required.
Do I need to lubricate the inside of the glass?
No, the inside doesn't need to be lubricated, because it can cause the spinning handle to slip, only the outer threaded joints and the movable metal parts of the attachment mechanism are lubricated.
What to do if the holder is hanging out?
If the holder is hanging, pull the fasteners. If the thread is broken, use a longer bolt or install a threaded bushing. In extreme cases, drill a new hole next to you, sealing the old one.