Fishing or resting on the water becomes much more comfortable when a full-fledged inflatable boat is installed. fishing-chairMany PVC boat owners are faced with the problem of how to securely lock a seat without damaging sensitive cylinders? Simply placing on the floor does not give stability, and regular banks are often uncomfortable for hours of waiting for cool.
The modern market offers many solutions, from factory platforms to homemade structures, but they all require a competent approach to the development of the market. editingMistakes in the choice of fasteners or materials can lead to leaks or breakage of the structure at the most inopportune time. In this article, we will discuss in detail all the steps of creating a convenient workplace in a boat.
Quality fastening is not only comfort, but also security Shifting the center of gravity or breaking the mounting assembly during pitching is not acceptable. We'll look at proven fixation techniques that will allow you to enjoy the process without being distracted by technical problems.
Choice of type of seat design
Before you start, you need to decide on the type of design that will be installed in your boat. There are several basic options, from simple removable benches to complex rotary systems, the choice depends on the size of the boat, the number of passengers and personal preferences of the owner.
The most popular solution is platformThis is a plywood sheet reinforced by a profile that is mounted on a mounting mechanism, which makes it easy to dismantle the seat, making room for gear or overnight accommodation.
⚠️ Attention: The use of heavy metal frames without proper underbody reinforcement can lead to deformation of the floor of the PVC boat under load, especially in cold water.
The alternative is to install the state-bank However, this option is less stable and not suitable for high-backed seats, since the center of gravity shifts upwards, which reduces the stability of the vessel.
- 🪑 Turning chair: It provides comfort and visibility, but requires reliable base fixation.
- 📏 Stationary bench: Easy to manufacture, takes up less space, but less convenient for long fishing.
- 🎣 Combined version: platform with the ability to install different types of seats.
- 🚫 Inflatable seats: They are light, but do not provide the proper stiffness for active fishing.
Required materials and tools
To create a reliable mounting unit, you need a set of high-quality materials that are resistant to moisture and mechanical stress. plywood The use of conventional plywood is unacceptable, as it will quickly dissipate from contact with water.
In addition to the base, you will need metal elements: profile pipe, corners or ready-made turning mechanisms. stainless steel The fasteners (bolts, nuts, washers) must also be galvanized.
To connect the elements and protect the structure, special adhesives and sealants will be required. It is important to use compounds designed to work with PVC and wood to ensure monolithicity and the use of a single, single-use, and watertightness Don't skimp on consumables, it's the longevity of your product.
- 🔧 Tools: jigsaw, drill, screwdriver, set of keys.
- 🧴 Chemistry: degreaser, PVC glue, polyurethane sealant.
- 🛡️ Defense: floor paint, wood varnish, anti-corrosion primer.
- 📐 Markings: Roulette, coal mine, marker.
When drilling holes in plywood, be sure to zinku them on the back side so that the bolt hats do not damage the boat cylinders when installing the platform.
Production of the platform-base
The platform is the foundation of the entire structure, so its construction must be approached with the utmost responsibility. First, accurate measurements are taken from the bottom of the boat at the site of the intended installation. The shape of the platform must repeat the curves of the cylinders to ensure a tight fit and uniform load distribution.
Carved out sea-plywood The workpiece needs to be carefully treated, the edges are polished to prevent splinters and damage to PVC tissue, and then the surface is coated with several layers of moisture-resistant varnish or special deck paint, which will protect the tree from rotting and swelling.
To reinforce the structure and prevent the boat from sliding down the bottom, PVC or rubber strips are glued to the bottom of the platform, creating additional friction and protecting the cylinders from abrasion. slip-proof.
| Materials | Thickness/Type | Appointment | Features |
|---|---|---|---|
| Phanera FC/FSF | 12-15 mm | Ground | Waterproof, strong. |
| Aluminum profile | 20x20 mm | Strengthening | Light, not rusting. |
| Rubber tape | 3-5 mm | Protecting the bottom | Depreciation, clutch |
| Clay 88/Polyurethane | Universal. | Sleijka | Elastic seam |
Installation of the turning mechanism
Installing the rotary mechanism is a key step in determining the functionality of your seat, and it attaches to the top of the platform with bolts, and it's important to use larger diameter washers or wide plates to spread the point load from the bolts over a larger area of plywood.
During installation, you need to strictly observe horizontality The distortion will cause uneven wear and discomfort when rotating. Use a grover or threaded fixator to fix the fixation so that the vibration on the water does not unwind the joints.
⚠️ Warning: When drilling holes under the mechanism fasteners, make sure that the points of the drill or bolts do not pass through and damage the boat cylinders when installing the platform.
Some chair models require additional installation adapter The adapter allows you to adjust the height and angle of the backrest, and all moving parts of the mechanism after installation are recommended to be lubricated with silicone grease to protect against salt water and sand.
☑️ Verification of the machinery
Alternative fastening methods
If you can't make a complex platform, you can consider simpler options for seat fixation. One of them is using the same platform. mounting Or special pillows that are fixed between banks, which are less stable, but are suitable for short-term departures.
Another option is to attach to galley-bag This method requires caution, because excessive tension can deform the side, slings must be wide so as not to cut PVC fabric, and have reliable fastexes with fixation.
There are also ready-made solutions in the form of seat-seat They don't require mounting, but they don't provide a rigid fixation of the body, which can be tiring when you're actively fishing with spinning or trolling.
- 🎈 Inflatable supports: They are light, but they are subject to puncture and deflation.
- 🔗 Slings on cylinders: They are universal, but can rub fabric with prolonged use.
- 🪑 Ready-made inflatable seats: They are as simple as possible, but minimally comfortable.
- 🔩 Strubkins: They are suitable only for hard elements (cans), require caution.
How to prolong the life of fasteners in the sun?
UV light destroys plastic and rubber, so if the boat is in the sun for a long time, cover the mounting area with dark cloth or use UV filtered protective sprays to prevent the plastic elements of the mechanism from cracking and rubber seals from drying out.
Safety and maintenance
Operating homemade structures in a PVC boat requires constant monitoring of their condition. Before each step into the water, check the reliability of the tightening of all bolts and the integrity of the welds. crack Metal or wood can cause a water accident.
After every fishing trip, especially in salt water, the structure must be thoroughly washed with fresh water and dried. corrosion It's better to keep the platform disassembled or separate from the boat to avoid mold formation.
Avoid jerks and jumps on the chair when operating, especially if the boat is on weight (such as when pulling ashore). This can cause tissue to rupture at the point of contact with the platform. loading capacity boats, taking into account the weight of the installed equipment and passengers.
⚠️ Warning: Never use sharp hooks or screws that are screwed directly into cylinders or rigidly attached to them elements for seat attachment - this is a guaranteed way to lose tightness.
Regular inspection and maintenance of fasteners is the key to your safety and long service as a homemade chair and the PVC boat itself.
Frequently Asked Questions (FAQ)
Can I glue the platform directly to the cylinders of the boat?
It is strongly recommended not to glue rigid structures directly to inflatable tubes, which creates stress points that, when the boat is deformed on the water, will lead to uncoupling or tearing of the fabric, the platform should lie on the floor freely or be fixed with soft elements.
What thickness of plywood is needed for an adult chair?
For confident weight support of an adult (up to 100-110 kg), taking into account the dynamics of water excitement, it is recommended to use marine plywood with a thickness of at least 12 mm. If you plan to install a heavy mechanism or store gear under the seat, it is better to increase the thickness to 15-18 mm.
How to treat plywood so that it does not rot?
The best option is to impregnate olive oil with a subsequent coating with yacht varnish in 3-4 layers, epoxy resins and special impregnations for terraces that create a water-repellent film are also well-proven.
How to prevent the platform from slipping on the slippery bottom of the boat?
The best way to do this is to glue rubber strips or thick PVC to the bottom of the platform, and you can also use the anti-slip linings that you use on the stairs, and it's important that the material is elastic and doesn't scratch the floor of the boat.
Do I need to remove the chair while driving the engine?
If the chair is mounted on a rotary mechanism, it is better to lock it at high speeds or remove it so that the sailing and water resistance do not affect the boat's handling. At low speeds, this is not critical.