Long stays on the water require not only reliability of the boat, but also basic comfort for the crew. Standard rigid banks, coming in the basic configuration of budget models, often cause back fatigue after an hour. buy an inflatable chair in a PVC boatTo turn fishing or cruising into a full rest.
The market today offers dozens of seat options that are different in design, type of attachment and ergonomics, and choosing the right tuning element can dramatically change the perception of time spent on the water, eliminating foul legs and low back pain. In this article, we will discuss all the nuances that you need to consider before buying.
It's important to understand that there's no one-size-fits-all solution: some people have a critical build speed, others have a full-length sleep in a boat, and once you've figured out the types of designs, you can find the perfect fit for your own. fishing-style and a model boat.
Why you should replace a regular can with an inflatable seat
Plywood or aluminum cans, especially in economy boats, are rigid planes without any anatomical support, and sitting on them for long periods of time disrupts the circulation in the legs and creates excessive pressure on the spine. Inflatable chair This problem is solved by distributing body weight evenly over the entire contact area.
In addition, inflatable structures have excellent thermal insulation. Sitting on cold plywood in the off-season, the fisherman freezes quickly, as the material takes away body heat. The air cushion works as an effective barrier, keeping warm even at low water and air temperatures, this is especially true for autumn fishing pike or perch.
Another important argument is mobility: Hard seats often take up a lot of space during transportation or require complex dismantling. The inflatable model is easily deflated, taking up minimal space in the gear bag, or moves around the cockpit in seconds.
⚠️ Warning: When installing an inflatable seat, make sure that it does not block access to cylinder valves and does not RUB objects, which can lead to puncture.
From a safety perspective, a soft seat reduces the risk of injury from a sharp rolling or falling inside a boat. A hitting a soft side or inflatable back is less painful than colliding with a rigid aluminum profile.
The main types of inflatable chair designs
When searching for a request”Boat chair inflatable to buy PVC"the user is faced with a huge variety of shapes, conventionally all models can be divided into several categories, each of which has its own advantages.
The first type is the classic inflatable seat cans, which are flat or slightly profiled platforms that are placed on top of regular stringers or fixed with Velcro straps, and they are as simple and cheap as possible, but they lack a full backrest.
The second type is backrested seats on inflatable supports, which already have full back support, which is critical for long fishing, and supports can be made in the form of separate cylinders or integrated design.
- 🪑 Transformer chairs - allow you to change the angle of the back or turn into a bed.
- 🎣 Models with holders - equipped with pockets for tackles and fixers for rods.
- ⚓ Lictros-mounted seats - are fixed along the side, freeing the center of the boat.
It is worth mentioning separately. floppy-chairThey're not rigidly attached to the boat, but they're on the floor of the cockpit, and they're comfortable, but they can shift when you're abruptly maneuvering, so they require an anti-slip coating at the bottom.
What is the difference between a chair and a jar?
A jar is simply a flat seat without a backrest, designed for transom installation, and a chair always implies a vertical backrest, and often armrests, to ensure a full rest.
Choice criteria: what to look for when buying
Choosing the right model requires careful performance analysis. Not all seats are suitable for all boats. First of all, pay attention to the dimensions. The width of the cockpit of your PVC boat determines which seat you can fit. The seat will rest too wide and deform, and the narrow one will be unstable.
Performance material also plays a key role. PVC coating (density of at least 750-900 g/sq.m.) guarantees durability and resistance to ultraviolet light. Cheap thin film analogues can quickly lose leakage or fade.
| Parameter | Budgetary option | Premium option | The best choice |
|---|---|---|---|
| Materials | Oxford 300D | PVC reinforced 1100 | PVC 750-900 g/sqm |
| Back | Missing or soft | Rigid frame + inflatable | Inflatable rib-ribbed |
| Firming | Velcro straps/Shaps | Sliders/Lictross | Combined |
| Weight. | 0.5 - 0.8 kg | 1.5 - 2.5 kg | 0.8. 1.2 kg |
Pay attention to the type of valves, reliable lobe or screw valves (type) Bravo or Navym) ensure tightness and ease of pumping; cheap nipples often poison the air and are inconvenient to use.
⚠️ Warning: When choosing a chair, check the equipment. Having a carry-belt and repair kit in the kit will save you time and money in the future.
Also important is the load capacity: If you plan to fish in warm clothes or if you weigh more than 90 kg, choose models with reinforced construction and additional cameras.
Boat mounting and installation systems
Comfort depends not only on the softness of the seat, but also on the reliability of the seat. A fixed chair allows you to focus on fishing without fear of rolling into the water when you are excited. There are several basic ways of mounting.
The most common option is to attach to regular stringers (longitudinal beams), the chair has special pockets or belts that cover the stringer, which makes it easy to move the seat along the boat, changing its position.
More advanced method - the use of lyctrosA rope is pulled along the side of the boat, which is hung on a chair, which frees up the floor of the boat and allows you to install the seat at any height relative to the side.
- 🔧 Suction fixation Rarely, but it is found for smooth floors.
- 🔗 Fixing with rings The chair is fastened to the boat's rings.
- 🧲 Magnetic holders It is only relevant for boats with metal elements.
When mounting, it is important to observe symmetry if you are mounting two seats. Uneven load can lead to the roll of the boat, which is especially dangerous when catching large fish or going to planing.
☑️ Pre-installing check
Some anglers prefer a combination of one seat with a backrest for the steering wheel and a simple inflatable jar for the passenger, which allows you to optimize the space and weight of the equipment.
Care, storage and repair of inflatable seats
And fly-chair After every fishing trip, especially in salt water or muddy conditions, the seat must be washed with fresh water and thoroughly dried. Humidity is the main enemy of textile coatings and valves.
Store the product should be spread out or slightly folded, but not in a compressed state, so as not to form clogs on the material. The optimal storage temperature is room, away from direct sunlight and heating devices.
In case of a puncture, repairs are easy, and most manufacturers complete their products with a remix, a process similar to the repair of the PVC boat itself:
- Clean and degrease the damaged area.
- Cut the patch out of the remake.
- Apply glue (usually polyurethane) to both surfaces.
- Press and leave to dry according to the instructions.
Use talc when packing a wet (but already dried) chair – this will prevent the internal surfaces of the material from sticking together during prolonged storage.
⚠️ Warning: Never use solvent-based adhesives (such as acetone) to repair PVC, as they can corrode the material. Use only specialized PVC adhesives.
Check the pressure in the chambers regularly. A sun-pumped chair can burst, and a poorly pumped one can quickly lose shape and comfort. The optimal pressure is usually 0.15-0.2 atm (as indicated in the product passport).
Overview of popular models and price categories
The PVC boat inflatable accessories market is full of offers from different manufacturers, and there are several price segments, each offering its own advantages.
The budget segment (up to 2000 rubles) is dominated by simple inflatable cans without backs from Chinese manufacturers or local brands, made of thin material and suitable for short exits to the water. TimeTrial or Flagship baseline.
The average price segment (2000-5,000 rubles) offers seats with backs, pockets and denser material. Master of boats, brig or hunterThese patterns are often anatomical in shape.
Premium segment (from 6000 rubles and above) is a complex design with rigid inserts, the possibility of transformation into a bed, the use of high-strength fabrics (Oxford 1200D) and YKK accessories. Nissamarine or specialized workshops offer individual tailoring for a specific model of the boat.
Buying a mid-range chair is often the middle ground, providing a balance between comfort, durability and cost.
When choosing, you should also consider the availability of warranty and spare parts. Popular brands are easier to find on sale, which will make it easier to buy remixes or additional accessories in the future.
Where to buy and how not to make the wrong choice
You can buy an inflatable chair in a PVC boat at specialized boating stores, large online stores or directly from boat manufacturers, the latter option is often preferable, since the factory chair is guaranteed to fit in size with your model.
When buying online, carefully examine the photos and reviews. Pay attention to the actual size inflated state, not in the package. Often the declared dimensions can differ from the actual 5-10 cm.
Don’t hesitate to ask the sellers about the material of the valves and the availability of the remix. A good seller will always provide complete technical documentation and advise on compatibility with your boat.
Remember that water comfort is not a luxury, but a necessity that affects concentration and safety. A properly chosen seat will make your fishing more productive and enjoyable.
Can I use a regular tourist inflatable seat in a boat?
Technically possible, but not recommended: Tourist seats have no special boat mounts, are made of less durable material and can slide over wet PVC surfaces, which is unsafe.
What pressure should be in the inflatable chair?
The optimum pressure is usually 0.15-0.2 of the atmosphere (or to the elasticity of the "finger dough"). Pumping is dangerous when heated in the sun, as the air expands and can break the seams.
Are the inflatable seats compatible with boats of different brands?
Most of the seats are versatile and are mounted on standard stringers, but for boats with unique geometry (for example, catamarans or narrow models), it is better to choose specialized solutions.
Do I have to blow my chair off after every fishing trip?
You don't have to blow it completely, but you need to keep the pressure down to a minimum to avoid stretching the seams when you store it, and if you keep the chair assembled in a warm room, you'd better blow it out completely.