Fishing or waterwalking on an inflatable boat is always the balance between mobility and comfort. Owners of popular PVC models such as the lineup MedvedThey often think about upgrading their equipment, and standard inflatable cans, which are standard, are good for carrying goods, but they're not good for waiting for hours for cool stuff. boat chair Bear It is becoming one of the most popular elements of tuning, which allows you to maintain back health and improve fishing efficiency.
Choosing the right seat is not just a matter of convenience, but a necessity dictated by the design of inflatable tubes. Hard bottom (HDB) or plywood slate does not always allow you to sit comfortably without additional support for the back. A competent chair solves the problem of leg and lower back fatigue, turning Spartan conditions into a full-fledged fishing place. In this article, we will discuss in detail the types of seats, how they are installed and the nuances that will help avoid common mistakes.
Don't underestimate the impact of ergonomics on the performance of the trip to the water. Prolonged exposure to an uncomfortable position reduces the concentration and response of the angler. fishing-seat It allows you to change your body position, which is critical when you're fishing in the cold season or when you're shaking a lot on the wave. Medved It will make your stay on the water safe and enjoyable.
Types of seats for inflatable boats
The water transport accessories market offers many solutions, each with its own advantages, the main division is by type of design and method of attachment to the sides or bottom. MedvedNot all universal models are suitable for these cylinders, and understanding the differences will help you choose the best option for your fishing style.
The most popular option is the classic folding chair with support on the board, which is lightweight, takes up minimal space in the transport bag and quickly installs. However, there are more complex designs, such as rotary models on the racks or suspension systems, the choice depends on whether you plan active trolling or prefer static fishing from shore or anchor.
The choice also includes the material of the frame: aluminum alloys have excellent corrosion resistance, but can be heavier than tubular structures made of stainless steel. Plastic elements are often used in budget models, but they are less durable when used in active sun and frost. Seat fabric It should be water repellent and dry quickly so as not to absorb river water.
- 🪑 Folding frame chairs are a universal solution for most tasks.
- ⚓ Stationary seats on pedestals - maximum comfort, but a difficult installation.
- 🎒 Inflatable pillows are minimalism, but lack of back support.
- 🛠️ Homemade designs - the ability to take into account all the individual nuances of the boat.
Criteria for choosing a chair for a boat Medved
Brand boats Medved They have their own design features that you need to consider when buying accessories. The width of the cylinders and the distance between them dictate the length of the support levers of the chair. If the levers are too short, the seat will fall between the sides, and if they are too long, they can rest on the cockpit or interfere with the rowing.
The important parameter is the load capacity and safety margin. Fishing equipment, equipment and dynamic loads when moving along the wave create considerable pressure on the structure. Metal frame The passenger must withstand the weight of the reserve, especially if it is planned to catch in a standing position or actively move along the cockpit.
⚠️ Warning: Do not use chairs designed for office furniture or camping as boat seats, they have no corrosion protection and may collapse at the most inopportune moment, leading to falling into the water.
You also need to look at the soft pads on the support levers, because cheap plastic or thin rubber can damage PVC fabric when you're winding or rolling, and the best option is wide rubberized pads that evenly distribute the pressure on the side, which is especially true for models. Medved with a thin bottom or high sides.
- 📏 The length of the support arms should match the width of the cockpit of your model.
- 🛡️ The presence of anticorrosion coating on all metal elements.
- 🧵 The quality of the seams and the density of the fabric of the seat itself.
- ⚖️ Total weight of the structure in the assembled form.
Self-manufacture of the chair
For lovers to build DIY the creation of a chair in a boat Medved This can be an interesting project, and it not only saves money, but it also creates a product that perfectly replicates the geometry of your boat, most often using moisture-resistant plywood (PSF) or a profile pipe.
The process begins with measurements. You need to measure the distance between the insides of the cylinders at the intended installation site. Then you calculate the height of the seat relative to the bottom. The standard height is 35-40 cm from the sleigh, which ensures a comfortable position of the legs. You can use an aluminum profile or tubes with a diameter of 20-25 mm for the frame.
☑️ Plan of action for the manufacture
When assembly is important to use only stainless fasteners. Conventional steel will rust after the first season, oxides will spoil clothing and can damage the fabric of the boat. Pipe connections are better done using corners and tees designed for greenhouses or commercial equipment, pretreated with protective varnish. The seat fabric is pulled with effort to avoid sagging.
| Materials | Advantages | Deficiencies | Complexity |
|---|---|---|---|
| FSF phanera | Cheap, easy processing | Heavy weight, afraid of prolonged contact with water | Low. |
| Aluminum profile | Lightness, strength, durability | Requires a tool for cutting and drilling | Medium |
| Stainless steel | Maximum strength, reliability | High cost, complexity of processing | High. |
| PVC pipes | It doesn't rust, it's very light. | Less durable, can break in the cold | Low. |
Instructions for installation and fastening
The right seat is the key to safety on the water. MedvedAs with other PVC models, rigid attachment to cylinders is usually not required if the support structure is used, however, for stationary versions or pedestals, careful surface preparation is necessary.
If you decide to install the chair on the rotary mechanism, make sure that the base is securely fixed on the sleigh. This uses special platforms that are attached to the stringers or bottom through reinforced paioles. Point pressure At the bottom of the boat is unacceptable, so under the legs of the racks necessarily put wide plates of plastic or rubber.
Algorithm of installation of folding chair:1. Inflate the boat to working pressure.
2. Arrange the support levers of the chair.
3. Carefully put hooks or paws overboard, avoiding sudden movements.
4. Check stability by pressing the seat with your hand.
5. Make sure that the sharp parts do not touch the PVC tissue.
Secrets of Sustainable Installation
To increase stability on the wave, you can use additional stretch marks from slings that fix the back of the chair to the railings or the rows of the boat. This will prevent tipping over when you roll.
When operating in the cold season, the metal becomes brittle, and before installation in the winter, it is recommended to warm up the rubber elements and check for cracks in plastic parts. Frost resistance Materials are a key factor for winter fishing, ignoring which can lead to breakage of the chair directly on the ice or in the boat.
- 🔍 Visually inspect the contact places of the chair with the boat for scuffling.
- 🔧 Regularly tighten bolt connections if the chair is stationary.
- 🧼 After fishing, be sure to wash the chair with fresh water, especially after salt.
- ❄️ In winter, avoid stress on frozen parts.
Tuning and modernization of seats
Even a good factory chair can be improved by making it even more comfortable. The easiest and most efficient way is to upgrade the soft part. Standard fabric seats are often too rigid or quickly stretched. Oxford 600D With PVC coating, the problem of durability will be solved.
For added comfort, many anglers install armrests, which can be made from curved pipes or buy ready-made universal sets, armrests not only give rest to the hands when catching fish, but also serve as an additional element of rigidity of the structure, and it is also popular to install pockets for tackle on the back or sidewalls of the chair.
Another option is to paint or anodize the frame in bright color, which is not only a matter of aesthetics, but also safety. A bright chair (orange, yellow, salad) is easier to notice if it accidentally falls overboard, and it helps to quickly find dropped small objects in the dark water of the cockpit.
⚠️ Note: When drilling holes in metal pipes to install additional equipment, use a center drill to avoid shifting and biting the tool, which can damage the pipe cover.
Keep in mind that storage is organized. If the chair is foldable, you should have a special case with straps, which will protect the fabric from dirt in the car and make it easier to carry. For stationary seats, a removable case that can be washed at home, leaving the frame drying.
Care and maintenance in the offseason
The durability of your chair depends on how you store it out of season, and after the fishing trips, you need to thoroughly clean the structure of sand, silt and fish slime, and these organic residues become an abrasive when dried, which, when frictioned, destroys the protective layer of metal and fabric.
Metal parts, even if painted, are recommended to be wiped with silicone lubricant or a special composition to protect against corrosion. Pay special attention to hinge joints and bolts. If the chair has soft padding, make sure that it is completely dry before packaging, otherwise mold may appear inside, which is difficult to get rid of.
Proper storage of the chair in a dry room at room temperature prolongs its service life by 2-3 times compared to storage in a damp garage or on a balcony.
It is better to keep the chair in a straightened form or in a loose case, so that the fabric does not track and loses elasticity. If there is not enough space, folding is allowed, but not more than once a month to avoid crumbs on the frame. Regular inspection before the start of the new season will help to identify small defects that are easy to fix before getting on the water.
Following these simple rules will allow your seat to get into the boat. Medved It's a good idea to be faithful for years, and comfortable fishing is not a luxury, it's a result of proper preparation and equipment care, and investing in a quality seat and the time spent installing it will pay off with no back pain and a great mood after a good day on the water.
Can I use a car seat in a PVC boat?
Theoretically, you can adapt the mount, but it's not recommended. Car seats are too heavy, have complex geometries that can damage cylinders, and get wet quickly. Specialized boat seats are lighter and safer.
What height of the chair to choose for fishing standing?
For standing fishing, the height of the seat is not critical, because you're at the bottom. However, if you use a seat to rest between casts, the optimal height is such that the feet are completely on the floor and the knees are bent at an angle of 90 degrees. It's usually 35-45 cm from the sleigh.
How to lubricate the rubbing parts of a metal chair?
It is best to use silicone lubricants or lithium lubricants (such as Litol-24) that are resistant to water flushing. Do not use motor oil or solidol as they can stain boat clothes and clothing, as well as attract dust and sand.
Can a chair hold a 120 kg weight?
Most high-quality seats with aluminum or steel frame are designed for loads up to 150-200 kg. However, when buying, be sure to study the product passport. For large weights, choose models with reinforced frame and additional support points.