Finding a comfortable solution for hours of waiting for the stick often leads anglers to consider upgrading the boat. Standard inflatable cans-seats quickly tire the back, deprive mobility and do not allow you to fully relax. PVC boat chair full set with understatement cockpit It is a welcome addition for those who appreciate ergonomics and functionality on the water.
The modern market offers many options, from simple folding chairs to complex engineering designs with swivel mechanisms. buy a really high-quality product, you need to understand the nuances of materials, methods of fastening and compatibility with specific models of inflatable vessels.
In this article, we will discuss in detail why understating the center of gravity is critical for safety, what materials will withstand an aggressive marine environment and how to properly mount the system without damaging the cylinders. You will learn what to look for when ordering a kit and how to avoid common tuning errors.
Why is it necessary to underestimate the center of gravity in an inflatable boat
The main problem with putting any hard equipment on an inflatable floor or a light jar is to shift the center of gravity upwards, and a high-altitude angler turns the boat into an unstable platform that becomes susceptible to the slightest gusts of wind and water turbulence. Understatement of cockpit Or the seat solves the problem dramatically.
When you lower the foothold closer to the bottom, the boat becomes much more stable, which allows you to safely stand up to full height for spinning or sonar without fear of sudden rolling, and also reduces sailing, which is especially important when fishing in large waters, where the side wind can blow the boat from the point.
⚠️ Attention: Installation of a high chair without additional supports on the sides or transom can lead to the tipping of the boat when a fisherman moves abruptly. Always calculate the stability of the structure before getting on the water.
There are several ways to do this: the simplest way is to use low platforms that are directly on the inflatable floor, and the more difficult and reliable way is to attach the brackets to the transom or the sides, which allows you to lift the seat above the floor, but lower it relative to the side. The optimal landing height for comfortable fishing with spinning is 25-35 cm from the level of the inflated bottom.
Package: what is included in the full set for modernization
When you plan on buy It's important to understand what's behind the phrase "full kit." Unscrupulous sellers often include only a seat and a couple of pipes in the basic version, forgetting about the critical elements of the fastener. low-set It should be designed as a single system.
In the perfect set, you'll find not only the chair itself, but also reinforced brackets designed for dynamic loads, including all the necessary bolts, nuts and washers made of stainless steel or aluminum with anti-corrosion coating. The absence of even one washer can lead to the construction unwinding at the most inopportune moment.
- 🪑 Ergonomic seat with the ability to adjust the inclination of the back and height.
- ⚓ Reinforced rotary platforms with position lock.
- 🔩 A set of stainless steel fasteners (AISI 316) or anodized aluminum.
- 🛡️ Protective linings on the contact points with PVC tubes to prevent wiping.
Materials deserve special attention. D16T aluminum alloys or aviation aluminum are the standard of quality. They are light, durable and do not rust. Steel structures, even painted, do not live in constant humidity and salt water. Plastic is allowed only in elements that do not carry the main load, such as armrests or decorative linings.
Materials and durability of structures on water
Aggressive aquatic environments, ultraviolet radiation and temperature changes require the use of specialized materials. boat-chair It's been years, avoid conventional black steel and cheap plastic, and the water will find its way to the metal through the smallest scratch, and the corrosion will start to destroy the structure from the inside.
Aluminum is the king of boat tuning. It doesn't rust, it oxidizes, forming a strong film that protects the metal from further destruction. But there's a nuance here, too. Technical aluminum can be too soft, so for power elements like bracket bases, it's better to choose hardened alloys. Stainless steel It is also a great option, but it is considerably heavier, which can be critical for lightweight inflatable boats.
How to care for an aluminum chair?
Aluminum doesn't require much maintenance, but after every fishing trip, especially in salt water, the structure needs to be rinsed with fresh water, which will wash away the salt plaque, which, when dried, can begin to break down the oxide film. Once a season, it is recommended to lubricate the moving parts of the rotating mechanism with silicone lubrication.
The fabric base of the seat should also be resistant to water and sun. The optimal choice is an Oxford with a density of at least 600D and polyurethane impregnation. Cheap fabric will fade quickly, become brittle (breakable) and break from tension. A good chair can withstand the weight of a fisherman in winter clothes and does not lose shape after many folding cycles.
Instructions for installing a chair with understatement
Installation of the system is a critical step, on which your safety depends. Before starting work, make sure that the boat is completely inflated and stands on a level surface. Installation on deflated or partially deflated cylinders is not allowed, since after pumping, the geometry will change, and the mounts may shift or damage the material.
First, try on the brackets or platform at the intended attachment points, check if the sharp angles of the metal of the cylinders are touching, and if contact is inevitable, use special protective tapes or PVC fabric linings, which are often bundled or purchased separately. Friction of metal about PVC When moving the boat on the wave can lead to scuffs and microcracks.
☑️ Pre-installing check
When drilling holes in the tanning board (if the mounting involves rigid fixation), be sure to use wood or metal drills depending on the material of the transom. The edges of the hole should be treated and coated with varnish or sealant to prevent moisture from entering the wood. inflatable floor systems are most often used that rely on cylinders or a timber that does not require drilling.
⚠️ Attention: When tightening the bolts on the transom, do not overdo it. Excessive force can push through the tree or deform the fasteners. Use a dynamometer key or focus on the force "from the hand plus a quarter of the turn."
Comparative table of anchorage types
The type of mounting you choose depends on your boat’s design and personal preferences, and below is a comparison of the main options available on the market.
| Type of attachment | Difficulty of installation | Sustainable | Effect on cylinders |
|---|---|---|---|
| inflatable floor (platform) | Low. | Medium | High (friction) |
| To the transz (hard) | Medium | High. | Missing. |
| To the sides (inflatable) | High. | Medium | Average |
| Combined | High. | Maximum | Minimum |
The bottom platforms are good because they don't require drilling, but they take up useful space inside the cockpit and can shift when fishing actively. The transom fastening is the most reliable, but it requires a hard transom and a willingness to modify it. Combined systems, where the chair rests on both sides and on the bottom, provide the best balance of stability and safety for PVC.
If you change boats frequently or rent a boat, choose universal inflatable floor anchorage systems with wide support pads that do not require reworking the boat and are easily dismantled.
Ergonomics and comfort of fishing
Comfort comes to the fore when fishing lasts more than 3-4 hours. PVC-boat chair The premium offers a lot more options, and adjusting the angle of the back allows you to change the position of the body, unloading the lumbar region.
Armrests are controversial, and on the one hand, they are comfortable for resting hands, and on the other hand, they can interfere with active fish breeding or working with oars, so many models are equipped with removable armrests or have a special shape that does not restrict movement, and it is also important to consider the width of the seat: too narrow will push on the hips, and too wide will limit maneuverability in a tight cockpit.
360 degree rotation is an indispensable option for trolling or throwing, allowing you to quickly turn towards the bite without getting up or shifting the body weight, which keeps the boat balanced.
Where to buy and what to pay attention to when ordering
Buying such specific equipment requires caution, the market is full of offers, but not all of them meet the declared quality. chair in LSKA PVC full set with understatement It is better at specialized manufacturers of boat equipment or at official dealers of well-known brands.
When ordering through online stores, be sure to check the presence of all the elements of the fastener in the kit. Often, the photo shows the full assembly, and in reality you will only get "iron" without bolts. It is also important to check the dimensions in the assembled form to see if the structure will fit in your trunk or boat hazel during transportation.
- 📏 Measure the inner cockpit of your boat before buying so that the seat doesn’t interfere with the installation of the motor or anchor.
- 💰 Compare shipping costs: Oversized cargo can be expensive when shipped to remote regions.
- 📝 Study the guarantee: quality manufacturers give a guarantee of 1 year on welded seams and mechanisms.
Don't chase the lowest price. Cheap Chinese counterparts often sin with thin-walled pipes that bend under load, and poor quality powder paint that peels after the first fishing. A quality chair is an investment in the health of your back and water safety that pays off with comfort.
When choosing between a cheap, unadjusted chair and an expensive one with full functionality, always choose the reliability of the structure. Repair on water is impossible, and a break in the seat can ruin the entire trip.
Frequently Asked Questions (FAQ)
Will the chair installation damage the inflatable floor of the boat?
If you install and use the protective pads correctly, the risk is minimal, the main thing is to avoid the point pressure of sharp corners and use wide support pads, regularly check the condition of the bottom at the contact points.
Will the structure withstand the weight of a fisherman more than 120 kg?
High-quality aluminum seats are designed for a load of up to 150-200 kg. However, when choosing, be sure to look at the manufacturer's specifications. For large weights, it is recommended to choose models with additional supports on the sides.
Can I use this chair in an inflatable floor boat (BBB)?
Yes, but with caution, in boats with NDM, it is better to use mounting systems to the sides or the transom, so as not to disturb the geometry of the inflatable floor, platforms that are placed directly on the bottom can shift the center of gravity too high.
How to keep a chair in the winter?
Store it in a dry room at a plus temperature, metal parts should be wiped with silicone lubrication, and fabric elements cleaned of dirt and completely dried before packaging to avoid mold.
Is it difficult to assemble a chair by yourself?
The assembly usually takes 15-30 minutes and requires no special skills. All holes are the same, and the package comes with an easy to understand instruction. The main tool that you may need is a wrench (often included).