The long-awaited bite of a large pike or pike is always a moment of truth for any angler, but equally important is the question of where to determine the trophy so that it does not fall off and spoil the rest of the fish. PVC-boat-cookUnlike classic cages, which are often bulky and require special installation, the kukan is a compact and efficient solution for short-term storage of catch directly overboard.
However, the use of this device on inflatable boats has its own unique features, dictated by the softness of the material and design nuances. Incorrectly fastened or poor-quality kukan can not only lead to the loss of a precious catch, but also damage the very body. PVC-boatIn this article, we will discuss all aspects of the selection, installation and operation of this equipment in detail, so that your fishing is as efficient as possible.
Many beginners underestimate the importance of correctly positioning the fishing line or cord on which the fish is strung, which often leads to overlapping and entanglement of tackle. The competent organization of the space around the cockpit allows you to always keep the trophy under control, without losing the ability to react quickly to a new bite. Let's look at the main types of structures and their applicability to soft sides.
Design features and types of cookies
The modern fishing accessories market offers many options, but not all are equally well suited for inflatable boats. The main difference lies in the way the attachment is made and the material of the main cable. PVC It is critically important that the device does not have sharp metal edges that can pierce the balloon when rolling or sloppy movement.
The most popular option is a telescopic cookie with a plastic or rubberized tip that can be attached to a switch or a special holder. Such models are often equipped with carbines for quick fixation and allow you to adjust the length of the working part depending on the depth and size of the intended catch. There is also a variant with a rigid base, but its use requires special care.
Choose models with plastic winding of a cable or fishing line, as a metal cable in a twisted state can have protruding hairs that damage the mucus of the fish and accelerate its death.
Special attention should be paid to homemade structures that fishermen often make from improvised materials, adapting them to their own. While the savings are obvious, homemade options may be inferior to factory-made ones in the reliability of fasteners and durability of materials, especially under the influence of ultraviolet and salt water.
- 🐟 Telescopic models with adjustable length barbells for easy access to water.
- 🐟 Transpant-mounted options suitable for boats with a hard or inflatable transanche.
- 🐟 Compact spiral models that are always in the water and do not take up space in the cockpit.
- 🐟 Reinforced designs with a double cable for catching large predatory fish.
Criteria for choosing the ideal cockroach for an inflatable boat
When choosing equipment, attention should be paid to the material of manufacture. Stainless steel It is a quality standard, as it is not corrosive even after prolonged contact with salt water, but it is important to check the quality of the treatment of the joints and joints to eliminate the risk of damage to inflatable tubes.
The length of the working length also plays an important role: too short a cooker will not allow the fish to sink to a sufficient depth where it will feel more comfortable and beat less. Too long an option can get confused under the bottom of the boat or on the engine screw if fishing takes place on the current or in the presence of wind.
And the fittings are also important: the fasteners must be opened in one motion, but they must be fixed securely so that the fish cannot free themselves. vertebrateThis prevents the twisting of the main line or cord during active movement of the fish.
For a lightweight inflatable boat, especially a single one, heavy metal can create unwanted roll or simply take up too much useful space when transported. Lightweight aluminum alloys or durable composite materials are becoming a great alternative to heavy steel.
Comparative specifications of popular models
To facilitate the decision-making process, we have prepared a comparative table that will help you compare the main specifications of the different types of cookies available on the market, which will allow you to choose the model that will perfectly fit into your fishing conditions.
| Type of model | Materials | Length (cm) | Weight (g) | Features |
|---|---|---|---|---|
| Telescopic | Nerzh. steel/Plastic | 60-120 | 350 | Adjustable length, compact in folded form |
| Trants | aluminum | Fixed | 500 | Hard fixation, does not take up space in the boat |
| Spiral | Spring steel | 40-80 | 200 | Always in water, minimal risk of damage to the side |
| Cord (Budget) | Capron/Leska | Anything. | 50 | Lack of hard elements requires skill |
When you look at the table, you can see that telescopic models offer a better balance between functionality and storage, but for stationary fishing from one place, you often choose transom options that don't require constant attention.
The optimal choice for universal fishing on a PVC boat is a telescopic stainless steel kukan up to 1 meter long with plastic tips.
Rules for safe installation on board PVC
Installation of a kukan on an inflatable boat requires a number of safety rules to avoid damaging the expensive boat. No direct contact of sharp metal parts with cylinders, even minimal friction when the boat moves on the wave can lead to scuffs or puncture.
The safest place to attach is considered to be the zone of the switches or special holders for rods installed on rigid structural elements (banks, transom). If you use a cucumber with a remote bar, make sure that the point of support is securely fixed and does not slip inside the boat or overboard at the wrong time.
⚠️ Warning: Never tie the cook directly to the inflatable balloon with a rope without a protective gasket, as when a large fish jerks, the knot can push through the material or RUB it.
For those who prefer to be attached to a trawler, it is important to consider the height of the board. The rod should be long enough that the lowered fish is below the level of the bottom of the boat, but not dragging along the bottom in shallow water. quick-removal It allows you to quickly change the position of the kukan depending on the fishing conditions.
☑️ Installation safety check
Techniques of catching and preserving
The correct use of the cookan directly affects the quality of fish meat. There is a common misconception that fish should be pierced in the gills or eyes, but modern methods recommend more humane and effective ways.
Once caught, the fish must be killed quickly to eliminate stress and the release of lactic acid, which spoils the taste of the meat. spinner Or just a precise punch, followed by immediate placement on the kukan, and the faster the fish stops beating, the better it will survive.
It is important to keep the order of the stringing: first catch, then the second, and so on, and take the catch in reverse order so as not to disturb the rest, this is especially true when catching pike, which can react aggressively to neighbors in the cookan.
- 🐟 Puncture fish only into hard cartilage tissues, avoiding soft tissues.
- 🐟 Lower the catch to a depth of at least 0.5-1 meters from the surface of the water.
- 🐟 Do not keep too many fish on one cooker so as not to create excessive load.
- 🐟 Periodically check the reliability of the fasteners, especially after catching a large individual.
The secret of freshness
If you plan to store the catch for several hours, add ice cubes in a sealed bag to the water around the cookan, this will significantly slow down the spoilage of the fish in hot weather.
Equipment care and storage
After each fishing, the kukan requires careful care, especially if the fishing was carried out in salt water. Salt plaque can destroy even high-quality stainless steel in a season, if not carried out preventive cleaning. Fresh water washing and wiping with soft rags is a mandatory procedure.
It's better to store the device when it's disassembled or folded, in a dry place, away from direct sunlight. Ultraviolet has a negative effect on plastic elements and rubber seals, making them fragile. Regular lubrication of mobile joints. silicone It will extend the service life of telescopic mechanisms.
Remember to check the condition of the line or cord, they lose strength over time and can rub against stones or shells, replacing consumables will be cheaper than losing a trophy fish due to a cliff.
⚠️ Note: Do not store the cookie with fishing gear in one drawer without protection, as hooks and glitters can damage the coating of the barbell or get tangled in the mechanism.
Frequently Asked Questions (FAQ)
Can you use a regular metal cable for a kukan?
Use of a regular metal cable is not recommended, as it can rust and damage fish, it is better to use a special line, a capron cord or a cable in a plastic braid, designed for fishing.
How to secure a cookie if there are no switches on the boat?
In this case, you can use special suction cups with holders, fastening to a rigid seat (bank) or make a temporary rack of PVC pipe fixed between the sides.
How deep should you put the fish on the kukan?
The optimal depth is 0.5-1.5 meters from the surface, which allows the fish to stay in cooler water layers and reduces the likelihood of being spotted by birds or other predators.
Is it harmful to keep a pike on a cookan with another fish?
Yes, it is better to keep the pike separately or on an individual draw, as it can damage another fish with its teeth or confuse all gear with its active movements.
How often should I change the line on the cookie?
The line or cord is recommended to be replaced every season or when the first signs of scuffing appear, since under the influence of the sun and water they lose up to 50% of their strength.