Modern fishing and recreation on the water are becoming increasingly dependent on technologies that ensure silence and environmental friendliness. The decision to buy an electric motor Haswing today is made by thousands of water engines tired of the noise of gasoline units and the smell of fuel. The Chinese brand, which has established itself as a manufacturer of reliable equipment in the mid-price segment, offers a wide range of solutions for inflatable PVC boats and small boats. Unlike competitors, the company relies on the availability of spare parts and adaptation of structures under harsh operating conditions.

Choosing a particular model often becomes a challenge due to the variety of modifications, differing in traction, the length of the lower unit and the type of control. Electric outboard motor It requires careful selection not only in terms of power, but also in terms of compatibility with the existing vessel and battery. Incorrectly selected thrust will lead to a quick discharge of the battery, and too short a shaft will not allow effective use of the engine on high-sided boats, which is why before buying you need to understand in detail the specifications and features of each series.

In this article, we will conduct an in-depth analysis of the model range, consider the advantages of buying from official dealers and analyze the typical mistakes of beginners. Haswing Trolling tackle owners and quiet hunters often choose, and we'll cover maintenance, battery compatibility, and real-world water conditions, and a smart approach to choosing will provide years of seamless service and pleasure in boating.

Why Choose a Haswing Brand for Your Boat

The main argument in favor of purchasing products of this brand is the optimal ratio of cost and functionality. Engineers have implemented a number of technologies previously available only in the premium segment, such as: traction-control Unlike cheap ones, it uses high-quality bearing lubrication and moisture protection, which is critical for the long life of the device. Many users note that even after several seasons of heavy use, the plastic of the case does not lose its properties and does not crack in the cold.

An important aspect is the versatility of the attachment and the ability to install on various types of transverses. The design of the bracket allows you to quickly fasten the unit on a PVC boat or metal vessel without the use of additional tools. Screw protection system When faced with underwater obstacles, it works effectively to prevent engine shaft failure, which is especially true for fishing in shallow waters or in grassy bays where the risk of encountering snags is highest.

⚠️ Warning: Make sure to check the equipment when buying. In some budget series, the screw can be made of soft plastic, which is prone to deformation when hitting stones. For a rocky bottom, it is better to immediately purchase a metal or composite screw of increased strength.

Another advantage is the extensive service network and the availability of spare parts on the market. If you decide to buy an electric motor Haswing, you do not have to look for months to replace a burned controller or a broken tiller. Service support The brand in the CIS is well developed, which reduces the risk of downtime in the high season, and the design of the engines allows you to make simple repairs on your own with minimal technical skills.

📊 What type of boat do you plan to equip with an electric motor?
PVC inflatable boat
Metal boat (Kazanka/Salute)
Plastic boat
Flat-bottomed boat (Jonbot)

The manufacturer's range is clearly structured by purpose and power, which simplifies navigation for the buyer. Osapian Traditionally considered a flagship, and geared towards owners of large inflatable boats and small boats, these models have increased thrust, often exceeding 80 pounds, and are equipped with telescopic rumples. Powerful electric motors This line is able to confidently lead a boat against the wind and current, which makes them an excellent choice for trolling on large bodies of water.

Series Cayman This is the most popular segment, where you can find models with thrust from 30 to 55 pounds, ideal for boats from 3 to 4 meters long, the feature of the series is the presence of models with vertical and horizontal mounting, as well as options with foot control, although the latter are less common. Reliability of the design It has been tested by time and many positive feedback from fishermen.

For owners of small boats is intended a series TroldenThese are compact, lightweight units that are easy to transport in the trunk of a passenger car, and despite their small size, they provide enough traction to move one or two people with a minimum load, and often this is the series that I start with, for beginners, to simply walk silently to the catch point.

What is the difference between the Pro and Standard series?

The Pro series features better materials in the lower unit node, a digital battery display on the tiller and an improved controller cooling system, and professional versions often use stainless steel for shafts, which eliminates corrosion in salt water.

Special attention should be paid to motors with a system GPS anchorThis feature allows the boat to automatically hold its position above the fishing point, freeing the hands of the angler. Although this increases the cost of buying, for sports fishing professionals it becomes an indispensable assistant. The choice of a particular series should be based not only on budget, but also on the real tasks that will be put before the boat.

How to calculate the required traction and length of lower unit

Before you buy an electric motor Haswing, you need to make accurate calculations to avoid disappointment on the water. The main parameter is thrust, measured in pounds (lbs). There is a rule of thumb: for every 45-50 kg of total weight of a boat (boat + motor + battery + crew + equipment), you need 1 pound of thrust. However, this rule works for ideal calm conditions. If you plan to fish in the river with the current or on a large reservoir where the wind often blows, the power reserve should be at least 1 pound of thrust. 20-30%.

The length of the diewood (shaft) is the second critical parameter. If the shaft is too short, the screw will capture air, creating cavitation and losing efficiency. If it is too long, water resistance and the risk of damage to the screw to the bottom will increase. Inflatable boats with a low landing, a shaft of 60-70 cm is usually sufficient. For metal boats with high sides or when mounted on the bow (bow mount), models with a shaft of 80 cm and above are required.

Below is a table that helps you navigate the choice of model depending on the specifications of the boat:

Boat type/Long length Total mass (kg) Recommended traction (lbs) Min. shaft length (see para.
PVC up to 3.2 m 400 30-34 lbs 60
PVC 3.5 - 4.0 m 400-700 40-55 lbs 70-76
Metal / Plastic up to 4.5 m 700-1000 60-70 lbs 80-86
Boats up to 5.5m 1000-1400 80-90 lbs 90+

It is important to bear in mind that speed Electrical power rarely exceeds 5-7 km/h, even on high-powered models. The motor is not designed for high-speed planing, but for economical and quiet travel. Attempting to achieve maximum speed will lead to exponential increases in energy consumption and shorter battery life. So the choice should be rational: it is better to take a motor with a reserve of thrust and work at medium speeds than to "floor" a weak unit.

☑️ Pre-purchase check

Done: 0 / 4

The choice of battery: lithium or lead?

The efficiency of an electric motor depends on the quality and type of energy source used. lead-acid batteries Deep discharge (AGM, GEL) -- they're cheap, affordable and safe, but their main drawback is the weight and memory effect, which over time reduces capacity. For a 50 lbs motor, a 100 Ah lead battery will weigh about 30 kg, which greatly affects the weighting of the boat.

The modern alternative is LiFePO4 (lithium-iron-phosphate) They are 2-3 times lighter than lead, have a more stable discharge curve (boat speed does not fall by the end of fishing), and can withstand thousands of charging cycles. Despite their high initial cost, they are more profitable in terms of life, and lithium allows the use of a smaller battery at the same weight that frees up space in the boat.

⚠️ Note: Not all chargers are suitable for different types of batteries. Charging a lithium battery with a lead charger can cause it to catch fire or fail a BMS board. Always use the charger recommended by the manufacturer of your battery type.

When calculating the capacity, you should focus on the desired battery life. If the lead battery is not recommended to discharge more than 50-60%, then lithium can be safely discharged to 80-90%, which means that to get the same travel time, the capacity of the lead battery formally must be higher. Energy efficiency The whole system consists of the quality of the motor, the state of the screw and the type of battery.

💡

In winter, keep the battery only in a charged state at a temperature of not less than 0 degrees. Deep discharge and frost are the main enemies of any chemistry, especially lead batteries, which can freeze and physically collapse.

Where to buy an electric motor Haswing and how not to run into a fake

Buying equipment online is risky, especially when it comes to complex electromechanical devices. Official dealers provide warranty, service support and access to original parts. Buying goods from dubious sellers on marketplaces without certificates, you risk getting a model assembled from defective components or used. Guarantee pass The seller's seal is your only leverage in case of a breakdown.

When inspecting the product, pay attention to the quality of the assembly, the absence of backlashes in the tiller and the integrity of the package. The original Haswing engines have a clear marking, serial number and quality printing on the box. The package must be as stated in the instructions: the presence of a screw, fuse, fasteners and manuals. The absence of at least one element may indicate that the product was opened or it is a so-called "refurbished" (restored) instance.

You should also pay attention to the availability of service centers in your area, even reliable equipment can require maintenance, if you bought a motor in a city where there is no authorized service, you will have to send it at your own expense, which in the case of heavy day water can be costly. Buying boating equipment from large specialized stores often involves pre-sale preparation and performance testing, which eliminates surprises on the first fishing trip.

Comparing prices across stores should be reasonable. Too low a cost often indicates that the seller is operating without an official brand license or is importing goods under gray schemes without paying customs duties. Check and sales contract They are mandatory documents for warranty service.

💡

Savings of 10-15% when buying from an unverified seller are not worth the risk of being left without a warranty for a complex technical device: an official dealer is access to original parts and qualified engineers.

Frequent Questions and Answers (FAQ)

Can a Haswing electric motor be used in salt water?

Most Haswing models have corrosion protection, but they are not fully marine (saltwater proof) in the long run without additional care. After each release on salt water, you must thoroughly wash the lower unit and screw with fresh water. For constant operation at sea, you should choose specialized marine series or be ready for frequent replacement of anodes and lubrication.

What is the maximum speed of an electric boat?

Speed depends on many factors: the weight of the boat, the shape of the hull, the state of the propeller and battery charge. On average, electric motors reach speeds from 3 to 7 km / h. It is almost impossible to go to plane with an electric motor due to the limitations on the power and capacity of modern batteries.

Do I need to register a boat with an electric motor in GIMS?

According to the current legislation of the Russian Federation, registration is subject to small vessels with an engine capacity of more than 8 kW (about 10.8 hp). Haswing electric motors have a power much less (usually up to 1-1.5 kW), so formal registration is not required if the weight of the curb vessel does not exceed 200 kg.

How often do I need to change the screw?

The propeller is a consumable. Its life depends on the operating conditions. If you often walk in shallow water, rocks or thickets, the propeller may need to be replaced after 1-2 seasons. When used carefully in deep water, the original propeller lasts 3-5 years or more. Signs of wear are chipped, cracked and loss of balance, causing vibration.

What to do if the engine stops working?

First, check the fuse on the cable or in the area where the bumper is attached. Then make sure the battery and contacts are in good condition. If there are no visual problems, don't disassemble the motor yourself so as not to break the tightness. Contact the service center for a diagnostic of the controller and windings.