Boat Fishing on the stream is a distinct art form that requires a specific approach to gear. When you decide to buy a feeder for fishing with a ring from a boat, you actually choose the heart of all your bottom gear, and it is the quality and design of this element that determines how well the feeding plume that attracts fish to your hooks will work.
Unlike stationary shore fishing, where weight and dimensions can be any, on-board fishing dictates its tough conditions. Feeder It should be compact, but it should be roomy, it should be heavy to lie on the bottom, but it should be convenient for filling and lifting quickly, and to make a mistake here means to be without a catch, because the bream and the large ulcer do not fit into the empty space.
The modern market offers many options, from primitive nets to complex mechanical devices, and understanding the differences between them will allow you not to overpay for unnecessary functions and to purchase the tool that will perfectly suit the conditions of your pond and the parameters of your boat.
Design features of the feeders for the board
The main task of any feeder This gear is a metered feed recoil. If you're going to catch a strong current, the structure has to be able to keep the particles flushed out constantly, creating a stable plume. Simple mesh models work on the principle of dispersion, whereas more complex cylindrical variants can regulate the washing rate.
When choosing a container, consider how to close the container. There are latch-lid models that are convenient for using live feed, such as a squirrel or a moth. For plant mixtures, a simple tie or a mesh bag inserted into a rigid frame is often enough. Metal frame It is preferable to plastic, as it is better to keep the shape on the bottom.
The bottom of the device is an important element. Some models have a cone-shaped bottom that directs the flow of water inwards, speeding up the leaching. Others have a flat bottom for stability on slurry soil, and the choice depends on where you're going to anchor.
⚠️ Attention: When buying, pay attention to the quality of welds or joints. Cheap Chinese models often fall apart after the first climb from the rocky bottom, leaving you without bait in the middle of fishing.
For deep-sea fishing, the weight of the structure is critical. A light-weight mesh will simply be blown away by the current, and it will lie down at an angle to the boat, rather than where it should be, and heavy models with integrated lead cargo or the ability to install it are the best choice for depths of over 5 meters.
Manufacture materials: metal, plastic or mesh
When you decide which model to buy, first look at the material. Stainless steel It's considered the gold standard for these products, and it doesn't rust, it cleans easily, it's strong enough, but the price of quality stainless steel can be high.
Plastic models, especially those made from frost-resistant polypropylene, are becoming more popular, lighter, less ringing when lowered, and cheaper to produce, but plastic has an enemy, ultraviolet light and frost, and cheap plastic can crack when hitting a boat in winter.
The mesh variants, often called avosaks, are a metal ring with a stretched mesh. This is a budget option that works well with loose dry blends. However, for cereals, they are less suitable because the feed is washed out too quickly.
There are also combination models where the body is made of plastic and the weighting is made of lead or steel, which reduces the overall cost of the product while maintaining the necessary weight specifications. PP or HDPE.
Types of feeders: from "Prizhin" to cylindrical
The range of fishing goods stores is striking in its many forms: the most common type is a perforated cylindrical feeder; holes can be of different diameters, allowing for the fraction of washable food to be regulated; small moths need small holes; large ones for corn.
The "Piglet" models are a spiral that gets a viscous bait inside of it, and they work well on the current, because the feed lasts a long time, but they're not comfortable to stuff, and they often require special syringes or funnels.
The rocket feeders are separate, although they are less commonly used to catch a ring, and they have an aerodynamic shape that allows them to be thrown far away, but from a boat, there is no need for this.
- 🐟 Cylinders - universal, suitable for any bait, easy to wash.
- 🌀 Springs - ideal for viscous porridge, keep food on the flow for a long time.
- 🕸️ Grids. The best option for live food and quick return of aroma.
- 📦 Containers. - closed containers with valves, work on a timer or mechanics.
When choosing a type, consider the consistency of your favorite bait. If you are used to using cake and crackers, the cylinder will be the best choice. If your tactics are based on using barley or hercules, the spring may be more effective.
Weight and volume: calculation under fishing conditions
The right weight is key to a successful fishing trip, and if the feeder is too light, the current will put it on its side, and it will start rolling down the bottom, scaring the fish. It will be difficult to lift too heavy, especially from a depth of more than 10 meters, when the line is pulled like a string.
The optimal weight for medium conditions (depth 4-7 meters, moderate current) is from 1.5 to 2.5 kg For the Oka or Volga in the area of dams, the weight can reach 4-5 kg. Always have in stock several loads or models of different weights.
Volume also plays a role. A large feeder takes longer to fill, but it also lasts longer without refueling. A small model is convenient to transport, but it has to be raised every 20 to 30 minutes, which can scare the flock that comes in.
Use the rule: the stronger the current, the greater the weight of the feeder and the smaller the hole for the feed exit, so that the jet does not wash it out instantly.
When buying, consider the possibility of weight upgrades, some models have a threaded hole to screw in additional loaders, which makes the gear versatile for different bodies of water.
Equipment and compatibility with the ring
The feeder itself is only part of the system, and the key element is a metal or plastic ring through which the main line passes, and the diameter of the inner hole of the ring must be larger than the diameter of the hole in the feeder so that it can slide freely.
A standard boat ring has a diameter of about 5-6 cm. The feeder should have an ear or carbine of the appropriate size. If you buy a ready-made set, compatibility is guaranteed. If you assemble the gear separately, check the dimensions.
The line on which the feeder hangs must be strong and not stretchable. Usually using a wicker cord with a diameter of 0.3-0.4 mm or a thick monophile line. A thin line can be cut against the edge of the feeder under strong tension.
| Parameter | Weak current | Average flow | Strong current |
|---|---|---|---|
| Weight of the feeder | 1.0 - 1.5 kg | 2.0 - 3.0 kg | 3.5 - 5.0+ kg |
| Volume (litres) | 1.5 - 2.0 | 2.0 - 3.0 | 3.0 - 4.0 |
| Diameter of holes | Small (3-5 mm) | Medium (5-8 mm) | Large (8-12 mm) |
| Type of bottom | Flat. | Cone/Flat | Cone/Heavier |
And don't forget the turntables and carbines, which prevent the line from curling and allow you to quickly change the feeder if you lose it or lose it, and the quality of the fittings directly affects the reliability of the whole gear.
Where to buy and what to pay attention to
You can buy a fishing feeder from a boat at specialized fishing shops, markets or online marketplaces. In an offline store, you can touch the product, assess the quality of welding and plastic. Online purchases are often cheaper but carry risks of damage on delivery.
When ordering online, look carefully at product photos. Look for real photos from customers, not just studio renders. Look for feedback on the strength of the mounts and ears.
⚠️ Warning: Avoid models with sharp burrs on metal or plastic, which can damage the main line when lowered or, worse, injure your hands when extracting hooks from fish in the dark.
The price range varies from 300 rubles for a simple grid to 2000 rubles for complex engineering structures made of stainless steel. The golden mean for an amateur model in the region of 800-1200 rubles. They usually combine good quality and reasonable price.
☑️ Pre-purchase check
Operation and care tips
After each fishing, the feeder needs to be thoroughly washed, and the residue of the bait, when sour, creates an unpleasant odor that can scare off the fish on the next fishing trip, especially for models with small nets, where particles get stuck.
It is better to store the product in disassembled form or in the straightened state so that the mesh or plastic does not deform. Metal parts should be lubricated with silicone lubrication, if they are not made of stainless steel, to prevent corrosion.
Before you get on the water, check the integrity of the carbine and the line on which the cargo hangs. A break in a feeder at a depth is not only a loss of money, but also pollution of the reservoir, which is unacceptable for a responsible angler.
The secret to long-term grid service
If you use a feeder with a mesh liner, turn it inside out after fishing and dry it, which will prevent the threads in the weaving knots from rotting.
Regular checks on the condition of the tackle will prolong its life. If you notice that the mesh has begun to thin or the plastic has gone cracking, it is better to replace the element in advance than to lose the catchy point due to a technical malfunction.
The main criterion for choosing is the balance between the weight necessary to keep at the bottom and the convenience of filling the specific bait you use.
Frequently Asked Questions (FAQ)
Can I use a feeder for feeder from boat to ring?
Technically possible, but impractical. Feeder feeders are too light to hold vertically on a strong current from a boat and have a small volume. Specialized feeder for the ring weighs 2-3 kg and can accommodate 5-10 times more bait.
What diameter of the hole in the ring is optimal?
The optimal diameter is 50-60 mm. This allows the fishing line to slide freely, but the ring does not get stuck on the knots or thickenings of the feeder. For very thick lines (more than 0.5 mm), the diameter can be increased.
How often do I need to raise the feeder for refueling?
The frequency depends on the activity of the fish and the type of feeder. On average, on fishing from a boat, the feeder is raised every 30-40 minutes. If live feed is used, the interval may be smaller, since it quickly diverges.
Why is the feeder moving away from the boat?
This is due to the underweight feeder or too much sailing line, the solution is to increase the weight of the cargo, switch to a thinner main line or use a feeder with a more streamlined shape.