Finding a reliable and time-tested vessel on the secondary market is a task that requires not only financial investment, but also deep technical awareness. Buy a boat Ob 1 Zich bu on avito Metal boats of Novosibirsk production have proven to be "unkillable" equipment that can withstand harsh operating conditions, but the age of many specimens dictates its rules when inspecting. Buying used equipment is always fraught with risks, but a competent approach allows you to minimize them and find a really decent option for a reasonable money.
Unlike modern analogues made of composite materials or PVC, OBE 1 The Avito market is full of offers, but not everyone can find a live boat with documents and a whole transom, and in this article we will discuss in detail what to look for first, how to distinguish high-quality repair from artisanal work, and whether to contact metal at all in 2026.
Popularity of the model OBE 1especially modifications zich (with modifications) because of its unique design simplicity and maintainability, owners value these boats for the ability to self-correct any malfunctions on the shore or in the garage. AMG5M aluminum alloy, which is made of the sides and bottom, perfectly lends itself to argon-arc welding, which makes the life of the hull almost non-fireable with proper care.
⚠️ When buying a boat older than 15-20 years, be sure to check for signs of electrochemical corrosion, especially if the previous owner kept the vessel in water all year round without corrosion treatment.
Many are looking boat Ob 1 Zich It's because of its performance, the elongated nose and the specific shape of the contours make it feel more confident than the classic Ob, and the presence of the hazelnuts and the ability to install a full windshield make it suitable for sleeping together, which is critical for multi-day expeditions. tent And soft seats, which significantly reduces the cost of initial arrangement.
But the downsides are also important: the metal body is highly thermal and sound conductive, the sun can heat the sides to a point where they can't be touched, and when the rain is thundering, which is why it's important to evaluate the quality of the interior lining and thermal insulation when buying a used one, if it was made by the previous owner.
Pricing in the secondary boat market OBE 1 It's quite chaotic and it depends on a lot of factors, and it can range from 40 to 120 thousand rubles or more, and the price range is not only due to the condition of the hull, but also due to the configuration. transmotorA tent, anchor device and trailer will cost much more than the "naked" body.
When analyzing ads on Avito, you should pay attention to the following parameters that affect the price:
- 🛠️ Status of the transom: New, reinforced plywood or rotten (requires replacement).
- 🎨 Paint: The presence of factory coating or traces of self-painting (often hides defects).
- 📜 Documents: Availability of a purchase contract, checks or an old boat registration certificate.
A common mistake buyers make is to focus only on the low price. Cheap options often require investments comparable to the cost of the boat itself. For example, replacing the transom and repainting the hull can cost 30-40 thousand rubles. So, choosing between the two options, it is better to buy a more expensive but well-maintained boat than a cheap stable that you have to restore all season.
Use the "delivery" filter on Avito if you do not have cargo transport, but remember that transporting the boat Ob 1 on the roof of the passenger car is prohibited due to the dimensions and weight.
The most important step is to physically inspect the boat. Aluminum is plastic, but when hit by rocks or logs, it can deform or crack. The initial inspection should be done in good daylight. Carefully examine the bottom for dents. Small concaves are acceptable, but sharp cavities are places of future stress and possible cracks.
☑️ Checklist for body inspection
Pay special attention to welds. Obi 1. The seams should be smooth, without interruptions and visible pores, and if you see traces of a sealant on top of the seam, it is a signal that the seam has "flowed" and was tried to revive it.
⚠️ Warning: Having a fresh layer of paint or sealant at the seams is a red flag. The seller may be hiding active leak or corrosion. Demand a demonstration of the boat on the water or a water test in the garage.
To test the tightness in garage conditions, you can use a simple method: the boat is placed on a flat surface (kielblocks) and pour water on the bottom in a layer of 2-3 cm. After 15-20 minutes, there should be no moisture under the boat. It is also useful to knock through the seams: a deaf sound can indicate the detachment of metal or the presence of hidden defects in welding.
The tranny is the Achilles heel of any old boat, and that's where the maximum load of the outboard motor comes from. OB 1 Zich When you look at the transom, you can often make it removable or reinforced. When you look, you can press all the weight on the top of the transom, if you feel the backlash, if you feel the creak, if you see the plywood playing inside the aluminum pocket, you need to replace it immediately.
Inside the cockpit, look at floorboards (floor). In the original, there is often plywood that rots with moisture over time. Replacing the floor with FF plywood or laminated plywood is standard procedure for used boats. Also check the condition of the runduks. Doors should open without jamming, and hinges should be safely welded or screwed.
How to check the quality of plywood on the transom indiscriminately?
Take a stitch or a screwdriver and try to prick the tree in several places, especially around the edges and around the fasteners. If the tip enters easily, like oil, the plywood is rotted. If the tree is hard and it layers, it will still serve.
The cockpit drain system deserves special attention. On older boats, the corks are often lost or soured. Check if the drain valve is working, if there are cracks around it. In some versions, the plugs are often lost or soured. Obi. self-draining forepic and afterpeak are installed, which is a big plus for unsinkability.
Buying a boat with already installed equipment can save you a significant amount of money and time. Often on Avito sell boats assembled with awnings, seats, anchor systems and even navigation. However, it is important to understand that soft equipment (tents, covers) wear out faster than the hull.
The table below will help estimate the approximate cost of additional equipment that can come with:
| Element | Condition of b/y | Approximate cost (ruble) | What to look at |
|---|---|---|---|
| Tent running | Good. | 15 000 - 25 000 | Integrity of tissue, lack of mold |
| transom wheels | Average | 3 000 - 5 000 | Bearings, lack of backlash |
| Anchor system | New. | 2 000 - 4 000 | Anchor, flap and anchorage |
| Sitting (pair) | Good. | 5 000 - 8 000 | Integrity of frame and upholstery |
If the boat is sold with motorThe motors on the boats of the Ob 1 usually have power from 9.9 to 20 hp. Testing the engine requires a separate approach: compression, spark, the state of lower unit. Buying a bundle of boats + motor is often more profitable, but more risky, because one element can be ideal, and the other requires capital.
Set up a boat with ready-made solutions (awning, seats, anchor) can save up to 40% of the budget compared to buying just one in the store.
The issue of registration with GIMS (State Inspectorate for small craft) is often controversial. OBE 1 They weigh less than 200 kg (in running order without a motor), which, according to current legislation, exempts them from mandatory registration if the engine power does not exceed 8 kW (about 10.8 hp).
When buying on Avito, be sure to require a Sale Agreement (PST).
- 📝 data-sheet figures of the seller and the buyer.
- 🔢 Serial number of the boat (broken on the transom or in forepeak).
- 💰 The real deal.
⚠️ Warning: The absence of a serial number or its inconsistency in the documents is the reason for refusing to buy. Recovery of numbers through examination is a long and costly process.
If the boat has been on record before, ask for a registry statement or an old boat's ID, which will help you track your ownership history and make sure the boat is not on bail or wanted. This is less relevant for metal boats than for expensive boats, but you should not lose your guard.
In this section, we will answer the most popular questions that arise from those who have decided to Buy a boat Ob 1 Zich bu on avito.
Do I need to register the boat Ob 1 in GIMS?
The Ob 1 has a weight of less than 200 kg. If you install a motor up to 10 hp (8 kW), registration is not required. When installing an engine more powerful than 10 hp, registration is mandatory, regardless of the weight of the boat, since the total engine power exceeds the threshold value.
What is the maximum motor to be placed on the Ob 1?
The manufacturer recommended engines up to 20-25 hp However, in practice, the owners put and 30 hp The main thing is the state of the transom and experience of management. Ob 1 - the boat is narrow and light, so powerful engines require careful handling, especially at turns and waves.
Is it difficult to find spare parts and remixes?
The Obi 1 is very simple, and there are almost no specific parts, aluminum, bolts, plywood, tent fabric, all sold in construction and hardware stores, and the only difficulty is finding the original windshields or rundooks, but they are often custom-made in the workshops.
Should I buy Ob 1 for fishing in large reservoirs?
For large reservoirs (Rybinka, Ladoga), Ob 1 is only suitable in calm weather or for moving along the shore. It is not a sea boat. Its narrow hull and low sides make it vulnerable on high waves. For large water areas, it is better to consider larger projects (Ob 3, Kazanka 5M, Progress).
How to keep the boat Ob 1 in winter?
A metal boat is best kept indoors (garage, shed) or under a tight awning outside. It is important to turn the boat upside down or ensure a good drain of water so that moisture and snow do not accumulate inside. Before wintering, it is recommended to smear all metal surfaces with anticores or solidol.
In summary, it can be said that boat Ob 1 Zich It's a great choice for those who like to mess with equipment, appreciate maintenance and plan to operate a vessel on rivers and small lakes. Buying a used version on Avito allows you to save a lot if you approach it wisely and do not ignore the defects. Careful inspection, document check and water test are your main tools in finding the perfect boat.