Decision to acquire aluminum-boat It's a turning point for any water-powered boat that wants to go beyond inflatable boats. The used boat market is now full of offers, and one of the most popular models available for purchase is the legendary Progress 2. The search for this boat often begins on popular bulletin boards, where you can find options from both individuals and dealers.
However, buying used metal requires careful and deep knowledge, because hull defects This article will explain how to make sure you don't make mistakes, what technical points to look for, and how to safely conduct a transaction, and a competent approach will allow you to get a reliable boat for a reasonable amount of money, avoiding costly repairs in the future.
Why Progress 2: Analysis of the Secondary Market Model
Model Progress-2The squirrel, which was produced in the 1960s, is still in steady demand today because of its time-tested design, and it's a classic, pointed-nosed flat-bottom that's perfect for calm rivers, lakes and reservoirs. AMG5MIt can serve for decades with proper care without losing its strength specifications.
The main advantage of buying this model in the secondary market is its maintainability and simplicity. Unlike complex modern composites, aluminum is easy to cook, and spare parts and drawings are available to every craftsman. In addition, a wide and stable platform allows you to use the boat not only for fishing, but also for family holidays on the water.
However, age does its job, and most of the items require investment, and when you search bulletin boards, it's important to understand that you're not just buying vehicles, but your history of operation, which may have been different. Body thickness This model is 2 mm, which is a compromise between weight and strength, so the condition of the skin is the primary criterion for evaluation.
Search ads on Avito: strategies and filters
Finding the right option on a popular ad site can take a considerable amount of time if you don’t use the right filters. First of all, it is worth limiting the search radius, since delivering a heavy metal hull over long distances can cost more than the boat itself. Use the map to visually assess the location of sellers, choosing options that can be reached on your own.
Product descriptions often contain keywords that should alert or attract attention, phrases like "require repair," "recovery," or "parts" usually mean through corrosion or severe dents. Look for ads with detailed photos. lantern And zygomatic joints, because these places suffer in the first place.
Note the year of release indicated in the ad. Although the model was produced for a short time, there are various modifications and years when the quality of the alloy or welding may have differed. Progress-2 Later years of release may have reinforced design elements, which will be a weighty argument in favor of the purchase.
Use the image search in the app: take a picture of the ad to find similar boats in other regions and compare prices.
Technical Diagnostics: What to Look at During Examination
In-person inspection is the most important step in the purchase, which should not be missed or replaced by a video call. Once you arrive, first assess the general condition of the hull for dents and distortions. Turn the boat over and carefully examine the keel and bottom: the presence of deep scratches or thinning of metal indicates frequent beaching without slippers.
Special attention should be paid to welds and rivet joints. Old boats often experience fatigue of metal around the fastenings of cans and rim bolts. If you see traces of fresh sealant or paint that hide the joints, this is a sure sign that the seller was trying to disguise the mounting of the slats. leakage or microcracks.
- 🔍 Check the transom: it should be rigid, without backlashes and rot (if the wooden lining is left).
- 💧 Pour water into the hold or use a hose to check the tightness of the seams.
- 🔨 Knock the skin: A deaf sound may indicate detachment or hidden corrosion under the paint.
Don't forget to check the kit. Often boats are sold without removable elements, such as cans, keys or windshields. The absence of these parts will require additional time and money to manufacture them or find the originals. staff-tent It will also be a big plus, as it is difficult to find a suitable size in the secondary market.
☑️ Checklist for body inspection
Typical defects and hidden problems of the body
Age takes its toll, and Progress-2 There are a number of diseases that are characteristic of this model, and the most common problem is corrosion in the areas where aluminum comes into contact with other metals or in areas where water is in constant contact, and if the boat was standing upside down for a long time, moisture would accumulate in the hold, causing oxidation from the inside.
Another problem is the deformation of the zygomatic guilels, which can move away from the side when hit by a wave or incorrectly transported, disrupting hydrodynamics and tightness, and restoring geometry requires professional approach and special equipment, which must be considered when bargaining.
⚠️ Note: If you find traces of multiple welded cracks on the sides, it is better to refuse to buy. Aluminum has the property of "swimming" after repeated heating, and the strength of such a case is no longer guaranteed.
It is also worth checking the condition of the floorboards (oil decking), wood elements often rot, and metal elements can rust. Replacing the floorboards is a simple procedure, but requires accurate measurements and fitting so that they fit tightly on the stringers.
How to check the quality of welding without a defectoscope?
Carefully examine the seam: it should be smooth, scaly, without pores and indigestion. The color of the seam should not differ much from the base metal. The presence of bumps or sharp color transitions indicates a violation of welding technology.
Pricing: How Much Does a Good Progress 2 Cost?
The price aluminum-boat This model varies greatly and depends on many factors: the condition of the case, availability of documents, equipment and region of sale all affect the total amount.
| Condition of the boat | Description | Estimated price (ruble) |
|---|---|---|
| Requires repairs. | There's leaks, dents, we need digestion. | 15 000 - 25 000 |
| Worker | The whole body, requires makeup. | 30 000 - 45 000 |
| Excellent. | After the restoration, the complete set | 50 000 - 70 000+ |
| With a motor. | The price depends on the condition of the motor | 80,000 |
Remember that the low price is often a trap: a cheap option may require an investment that exceeds the cost of the boat itself. Restoration metal is a time-consuming process and requires the skills of a welder-argoner, whose services are not cheap.
When you're bidding, you should be able to point out the disadvantages of not having documents, needing to replace floorboards, rubbing paint, which will help reduce the price by 10-15% of the price, but you should not put too much pressure on the seller if the boat is really in good condition - these options go away quickly.
The optimal purchase price is the cost of a boat in the “working” state, which you are ready to bring to the ideal yourself, without overpaying for someone else’s restoration.
Legal aspects and execution of the transaction
Buying a boat from hand requires the right legal clearance to avoid future problems with the GIMS, the main document is the contract of sale (PST), which is drawn up in free writing in triplicate, it must specify the passport details of the seller and buyer, as well as the details of the boat itself.
The key is the presence of a boat's book or a factory passport with a pasted photo and number. Boat number It's a transom or a forehead, and it must match the number in the documents, and if you don't have the documents, it's going to be very difficult to register the boat, you're going to have to go through the court process of recognizing ownership.
⚠️ Warning: Never buy a boat without papers or with numbers that don't read, it could be stolen property or scrap metal that can't be legalized.
After signing the contract and transferring the money, the new owner must apply to the GIMS within 10 days to register the ownership and register.
Frequently Asked Questions (FAQ)
Can you install a powerful engine on Progress 2?
The boat is designed for motors up to 10-12 hp Installation of a more powerful engine (15-18 hp) is possible, but requires strengthening the transom and reworking the structure, as the load on the stern increases and differentiation changes.
Do I need to register Progress-2 in GIMS?
Yes, if the weight of the boat with the engine exceeds 200 kg or the engine power is more than 8 hp (8 kW). Since the Progress-2 weighs about 140 kg, then with any engine more powerful than 8 hp registration is mandatory.
What's the best way to paint an aluminum boat?
Aluminum is best suited for epoxy soils and polyurethane enamels, ordinary oil paints will quickly get out, and thorough cleaning and degreasing of the surface is required before painting.
Where to find plans for the repair of Progress-2?
Drawings and charts of cutting sheets can be found in specialized magazines "Boats and Yachts" for the 60-70s, as well as on thematic forums of water engines in the documentation section.