Choosing a swimming vehicle is always a compromise between cost, reliability and comfort. When it comes to the phrase "buy a PVC boat hunter 360 a innd", the potential owner is looking for a universal solution for fishing or resting on the water. NDMA (Low Pressure inflatable floor) is a special class of boats that is radically different from the classics with floorboard floor.
Many beginners mistakenly believe that all inflatable boats are the same, but the design of the bottom plays a crucial role here, and it is the type of floor that determines the speed of assembly, driving performance and ease of movement inside the cockpit. Hunter 360. This is a popular size that allows you to feel confident on the water alone, and sometimes three, while remaining compact enough for transportation.
In this article, we will take a closer look at all aspects of owning a boat, and you will learn why low bottom pressure is not a disadvantage, but a technological feature, and who should really consider this option before making a purchase.
Design features of the NDLD model
The main difference you get when you decide Buy a Hunter 360 NHLB boatIt's not a hard-plated plywood floor, and instead of aluminum or plywood, it uses an inflatable structure that consists of several insulated compartments, which makes the boat much easier when assembled, because you don't have to carry heavy floor slabs.
The 360-size models typically have a diameter of about 40-42 cm, which provides a good payload. However, it is the bottom that dictates the rules of the game. It is pumped to the pressure of only 0.2-0.4 atmosphere. This creates a "soft landing" effect, but requires an understanding of the physics of the material's behavior under load. When moving on a planing, such a bottom can bend, forming what is called a "transom wave."
⚠️ Warning: Never pump the bottom of the BND to the pressure recommended for cylinders (usually 0.25-0.3 atm). Excess pressure in the bottom plane can cause joints to rupture or deformation of the structure when heated in the sun.
The material for such boats is reinforced PVC Hunter often uses a fabric density of 750 to 900 g/sq.m. This provides resistance to abrasion against sand and rocks, but the weight of the boat itself is still tangible, although smaller than that of the soldered counterparts. The translance design is usually reinforced, allowing for motors up to 10-12 hp.
Why is the bottom called “low pressure”?
The bottom is pumped separately from the cylinders through a special valve, the pressure there is minimal to maintain elasticity and shock absorbing properties, unlike rigid cylinders, which hold the shape due to high pressure.
Advantages and disadvantages of inflatable floor
Decision Buy a PVC boat Hunter 360 and the Ind It has its own bright advantages, which often outweigh the disadvantages for a certain category of users. The main trump card is the speed and ease of assembly. You don't have to insert floorboards, fix them and waste time leveling. You just pump the cylinders and the bottom, and the boat is ready to launch in 10-15 minutes.
And the bottom of the inflatables is also very cushioned, and the wave is softer, the impacts on the water are elastic, and it reduces the load on the angler's spine and the noise on the move, but there's also a downside to the coin that the retailers don't talk about.
- 🚀 Assembly speed: The boat is assembled many times faster than the floorboard, which is critical with frequent departures.
- 🎒 Compactness: In deflated form, it takes up less space in the trunk, since there are no rigid elements.
- 🌊 Comfort: You can walk in soft shoes on the bottom, it is pleasant to the touch and warmer than cold aluminum.
- ⚖️ Weight: The absence of floorboards reduces the total weight of the kit, which is important for single-seat carrying.
A significant disadvantage is the deterioration of hydrodynamics at high speeds, the bottom bends under the weight of passengers and the engine, creating additional resistance, which leads to increased fuel consumption and lower maximum speed, and it is also harder to stand on a soft bottom, especially if there is only one person in the boat, the center of gravity shifts, and the boat may become less stable on the course.
Boats of NDND are ideal for quiet fishing and cruising, but inferior to floorboard models in speed and course stability at full speed.
Technical specifications of Hunter 360
When choosing a specific modification, it is important to pay attention to the numbers. The Hunter 360 range can vary depending on the year of production and the specific series, but the basic parameters remain similar, and understanding these specifications will help you choose the right engine and equipment.
The dimensions of the boat allow you to accommodate 2-3 people, but it is most comfortable for two. Length inflated condition is about 3.6 meters, width is about 1.6-1.7 meters. The interior space is organized with the help of two inflatable seats-cans, which can be moved along the sides, fixing in special pockets or on lyctros.
The following is a table with averaged technical data for the Hunter 360 BNDM model:
| Parameter | Meaning |
|---|---|
| Total length | 360cm |
| general width | 165-170 cm |
| Load capacity | 550-600 kg |
| Recommended engine power | 10-12 hp. |
| Boat weight (without motor) | 45-50 kg |
It is important to bear in mind that loading capacity This is indicated with a margin, but for the exit to the planing with two adult passengers and the equipment of the engine with a capacity of 5 hp may not be enough. The optimal choice for this model is the engine 8-9.9 hp, which will allow you to reach a speed of about 25-30 km / h depending on the load.
Choice of motor and attachment equipment
If you plan on Buy a Hunter 360 NHLB boatAs mentioned, a soft bottom dictates its limitations, and a motor that is too powerful will not increase speed due to water resistance to the bent bottom, but will only increase gasoline consumption.
The ideal two-stroke engines for this model are Japanese or Chinese-made 8-9.9 hp, light enough not to overload the transom, and provide acceptable dynamics. Four-stroke engines are also possible, but they can be overweight for an inflatable floor boat, especially if you often take the boat out of the water yourself.
As for attachments, the availability of the NDND is critically important quilt or a rigid insert in the bow (if provided by the design) to keep the shape. It is also recommended to use an anchor loose bolt, since on the soft bottom the anchor shaft can rub against the valves or seams.
⚠️ Warning: When installing the engine, make sure that the daywil is submerged to the required depth, but not too deep to create unnecessary splashes and resistance. For NDNDND boats, the angle of the differential often has to be selected experimentally.
Don't forget the tanner wheels. For a 50kg motorized boat and a tank, they're not a luxury, they're a necessity. Dragging a load of tannery along the beach is a tricky pleasure. The wheels are attached to a special bracket and allow one person to easily move the boat on hard ground.
Rules of operation and care of PVC
The durability of your purchase depends on how you care for it. Polyvinyl chloride is durable, but it's afraid of ultraviolet light and aggressive chemistry. Leaving the boat ashore in the scorching sun reduces its lifespan. Always try to put the boat in the shade or cover it with a tent.
After every fishing trip, especially in salt water or in muddy overgrown waters, the boat needs to be washed with fresh water. The sand, when it gets into folds and seams, works like an abrasive. It will rub the fabric when inflated and blown. Use a soft sponge and special PVC care products, avoiding solvents.
Keep the boat half-blown at room temperature, which will prevent cloth cloth from breaking on the folds and keep the adhesive joints elastic for years to come.
Check the pressure in the cylinders regularly. In hot weather, the pressure increases, and if you pump the boat to full stop in the morning, it can become stone by lunch, in which case you need to put the excess pressure through the valve so that you do not damage the seams. In winter, the pressure drops, and the boat becomes sluggish.
Where and how to buy: expert advice
Decision Buy a PVC boat Hunter 360 and the Ind The market offers many options, from official dealers to aftermarket announcements, buying from an authorized dealer gives you a guarantee of factory quality and service, you get a product passport and the confidence that quality materials were used.
When buying from hand, be sure to conduct a thorough diagnosis: inflate the boat completely and leave for a day; check the seams for stratifications, and the bottom for microcracks. Often used boats have hidden defects in the bottom, which manifest only under load on the water.
☑️ Checking the boat before buying
Pay attention to the package. Often the basic version may not include a pump, bag or transom wheels, which you will have to buy separately. Compare the total cost of the kit from different sellers. Sometimes it is more profitable to take a more expensive basic equipment than to assemble all separately.
Frequently Asked Questions (FAQ)
Can I walk on the bottom of the Hunter 360 NDND boat in rigid shoes?
Although PVC fabric is strong, a sole with rocks or sand can damage the inflatable floor, it is better to use special soft shoes or take off shoes when entering the boat.
What is the maximum speed of the boat Hunter 360 with an engine of 9.9 hp?
Depending on the loading and the condition of the bottom, the speed will be about 25-28 km / h On a soft bottom to achieve high plane speeds is more difficult than on a hard one.
Should the valves be lubricated?
Yes, it is periodically recommended to lubricate the movable parts of the valves with silicone lubrication so that they do not acidify and ensure tightness.
Can I repair the boat by myself?
Small punctures can be sealed yourself with a remix and glue for PVC. However, serious damage to the seams is better entrusted to professionals in the service center.