Choosing a reliable boat for fishing or family vacations on the water is always a compromise between the load capacity, weight and dimensions when assembled. floatboat The mid-size models often come to mind, about 3 meters long. It is in this segment that the Taimeen 3200 NDND is located, which has established itself as one of the most affordable and practical options in the Russian market. If you plan to buy a Taimen 3200 NDNDD boat, then you are most likely looking for a time-tested design without frills, but with a full set of necessary features for comfortable operation.
This model is manufactured by the company "BoatWise", which specializes in the production of products from the PVC The main difference between the NDNDM series is the inflatable floor, which makes it much easier to assemble and reduces the overall weight of the product. Unlike models with hard floorboard bottom, you don't have to spend time laying aluminum profiles or plywood sheets, which is especially valuable when you go out to the water, but it has its own features that you need to know about before you buy, so you don't get disappointed in the operation.
In this article, we will discuss in detail the technical specifications, advantages and disadvantages of this model, as well as give recommendations for choosing a complete set. high-pressure It's a key element of comfort, and whether you should overpay for additional options, and we'll also address the safety and durability of materials, so that your purchase decision is informed and informed.
Technical specifications and design features
The base of any inflatable boat is the material it's made of. The titular 3200 NDNDM is made from a two-layered reinforced PVC This material is highly resistant to abrasion, exposure to fuel and ultraviolet radiation. The seams are made in a latent (therm-glued) manner, which ensures their tightness and strength, eliminating stratification even under extreme loads. For those who plan to use the boat not only in summer, but also in the off-season, an important parameter is the frost resistance of the material, which maintains elasticity at low temperatures.
The dimensions of the model fully correspond to its index: the total length is 320 cm, and the width is 136 cm. Such dimensions allow you to comfortably accommodate on board two, and if necessary, three adult passengers. The boat's carrying capacity is 400 kg, which with a margin overrides the weight of the crew and the necessary equipment. It is important to note that the weight of the boat itself in the assembled form does not exceed 28 kg, which makes it portable even on a passenger car without the need for a special trailer or a powerful outboard motor.
The key element of the design is the inflatable floor High Pressure This gives the bottom a stiffness comparable to that of hard coatings, but retains the weight advantage, and the cylinders are divided into independent compartments, which ensures buoyancy even if one of them is damaged. keelwhich improves the course stability and driving performance when driving for an outboard motor.
⚠️ Attention: When pumping the bottom of high pressure, carefully monitor the pressure gauge. Exceeding pressure in hot weather can cause joints to rupture or deform the structure. Always leave the boat in the sun with slightly lowered valves if you are not using it at the moment.
For a visual comparison of the main parameters with competitors in this class, you can refer to the table below:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Full length | 320 | centimeter |
| Full width | 136 | centimeter |
| Load capacity | 400 | kilogram |
| Boat weight | 28 | kilogram |
| PVC density | 850 | g/sqm |
Advantages of the inflatable floor of the NDND before the paiole
The decision to buy a Taimen 3200 NDND is often made precisely because of the type of bottom. Unlike traditional plywood structures, where the bottom is assembled from individual aluminum or plywood sheets connected by profiles, it uses a single inflatable balloon. This eliminates the main disadvantage of the hard bottom - the complexity of the assembly. You do not need to look for a flat area to spread the boat and start inserting bulkheads. It is enough to spread the cylinders and pump them.
The second important advantage is comfortThe inflatable floor works as a shock absorber, smoothing out the shocks of the wave. On a solder boat with a thin aluminum floor, water can seep between the joints of the sheets, creating a cold puddle under your feet. In the NDNDM model, the floor is always dry and warm, which is especially important for long fishing or cruising with children. In addition, the absence of hard elements inside the cylinders increases the internal volume, making the cockpit more spacious.
For quick drying of the boat after fishing, use a compressor on blowing: connect the hose to the bottom valve and blow through the internal channels to remove the moisture residue before packaging.
But the reverse side of the coin is also worth considering: Inflatable bottoms are more vulnerable to mechanical damage from sharp objects (hooks, spines, broken glass) than 4-5 mm plywood or grooved aluminum. Therefore, when operating in reed-covered water bodies or on stony banks, increased caution is required. Also, the rigidity of the inflatable floor, although high, is still inferior to hard decking when actively cruising on the cockpit.
- 🚀 Quick assembly and disassembly take no more than 10-15 minutes, even for one person.
- 🛡️ High degree of comfort: warm, dry and gently under the feet in all weather.
- ⚖️ Less total weight of the structure compared to analogues with a hard bottom.
- 📦 Compact in packaged form due to the absence of rigid elements.
Installation and possible modifications
The basic equipment of the Taime 3200 NDND usually includes the boat itself, two inflatable seats (banks), a bag-packaging, remix and product passport. The seats are designed as inflatable cushions with a rigid insert on top, which allows you to adjust their position along the sides depending on the situation. This is especially convenient when fishing in thickets, when you need to shift to the nose or stern to guide the boat through the vegetation.
When buying, you should pay attention to the possibility of installing additional equipment. timberThis allows you to install outboard motors with a capacity of up to 5-6 hp (depending on the modification of the transom). rod-holderMany owners immediately purchase anchored shell and perimeter fences, which improves safety on the water.
☑️ Checking the completeness when buying
There are different colors and camouflage colors available to help you choose a boat for specific tasks. For hunters and fishermen who want to disguise, the best choice is to use a model in the colors of "reed" or "forest". For those who like cruising and tourism, bright salad or blue colors that are clearly visible on the water and provide safety in poor visibility are more suitable.
⚠️ Warning: Do not use non-standard seats without first checking the mounts. Homemade cans can slip off a smooth PVC cylinder, leading to loss of balance and possible rollover.
PVC boat operation and maintenance
The durability of the TIMEN 3200 NDND is directly dependent on proper care. PVC's main enemy is ultraviolet and dirt. After each fishing trip, it is recommended to wash off the surface of the boat sand, silt and fish residues with fresh water. The accumulation of organic matter in the folds of the material can lead to mold and unpleasant odor, which is difficult to get rid of. Drying the boat before packaging is a prerequisite, especially if it is stored in the apartment.
While the material is designed for low temperatures, it is not recommended to store the inflated product in the cold, as PVC becomes brittle and can burst if accidentally impacted. The optimal storage temperature is from -10 to +25 degrees Celsius. Before first using after winter hibernation, the boat must be kept at room temperature for several hours to restore its elasticity.
How to turn the boat NDNDO correctly?
Flush the air out of the cylinders, but not all the way through. Fold the sides inwards to the center, then roll the boat from stern to bow, releasing the air residue. Only then completely twist the valve, which will prevent the materials from forming crevices in the same places.
Small puncture repairs can be done by yourself with a remix, using a special glue for PVC and a patch of the same material, it is important to degrease the surface and allow the glue to polymerize within the time specified in the instructions. Major damage, especially at the seams or in the area of the transom, it is better to trust professionals in specialized workshops that use the method of hot vulcanization.
- 🧼 Wash the boat with a soft sponge using neutral detergents.
- ☀️ Avoid prolonged exposure to the scorching sun unnecessarily.
- 🔧 Check the pressure in the compartments regularly and pump if necessary.
- 📦 Keep the product in straightened or freely folded form, without squeezing the load.
Recommendations for the selection of an outboard motor
The choice of the motor for the Taimeni 3200 NDND is a balance between the desired speed and safety. The optimal engine power for this model is from 3.5 to 5 hp Motors of this power allow you to reach speeds up to 15-20 km / h with one passenger and load, which is enough to move along reservoirs and rivers with moderate currents. Installation of a more powerful engine (6-8 hp) is possible, but requires caution and experience, as the boat becomes more slick on the wave.
The important parameter is the length of the daydwoot. In these cases, short leg (S) motors are usually suitable, but due to the design of the transom and inflatable floor, the standard short leg may be small and the screw will capture air. In such cases, it is recommended to use motors with a standard leg length (L) or install a transom pad. Before buying, be sure to consult the seller or measure the height of the transom.
For a boat with a length of 3.2 meters with NDND "golden mean" is a four-stroke engine with a capacity of 4-5 hp: it is economical, quiet and provides confident glides with one angler.
When operating with a motor, you should consider that the inflatable floor has less water resistance, but also less inertia. Sharp turns at high speed can lead to aft skidding. So maneuvering should be smooth. Also, you should remember the weight of the motor: the lighter it is, the easier it will be to load the boat on the roof of the car or drag it along the shore.
Where to buy and what to pay attention to when ordering
Buy a boat Taimen 3200 NDND can be both in specialized stores of water-motor equipment, and through official dealers on the Internet. When ordering online, it is important to pay attention to the date of production of the product. PVC material has the property of "aging" even in stock, so it is advisable to purchase a boat released no more than 6-8 months ago. Fresh material is more elastic and better holds glue in the seams.
When you receive the goods, make sure to make a visual inspection. Check the integrity of the package, no cracks and scuffs on the cylinders. Make sure that the package contains all the declared accessories, including the bag and remix. The presence of the factory tag with the number and the date of production is a guarantee of the originality of the products and the right to warranty service. Feel free to ask the seller about the terms of warranty and return.
- 🏪 Buy only from official dealers to avoid counterfeiting.
- 📅 Check the release date: the fresher the boat, the better.
- 📄 Keep a check and a warranty card for the entire life of the service.
- 👀 Carefully inspect the goods when receiving, without departing from the cashier / point of issue.
Do I need to register with GIMS for TIMEN 3200 NDNDM?
According to the current legislation of the Russian Federation, registration is subject to small vessels weighing more than 200 kg. Since the weight of the Taimen 3200 is about 28 kg, and even a powerful engine rarely exceeds 30 kg, in total with the cargo you are unlikely to reach the threshold of 200 kg. However, if you plan to put a heavy motor and carry a lot of cargo, it is better to weigh the full set. In most cases, registration is not required for this model, but the rights to control (if the motor is more powerful than 5 hp or 8 hp depending on the year of the engine) may be necessary.
Can I use a NDND boat in winter?
You can use a boat in subzero temperatures, but with caution. PVC becomes tough, and the risk of damage to it when hitting ice or stone increases. inflatable floor in severe frost can lose some of the pressure. It is recommended to use special winter powders for the valves so that they do not freeze, and do not leave the boat in the cold unattended for a long time.
How long does the boat dry after fishing?
Drying time depends on weather conditions. On a sunny windy day, the boat dries in 30-40 minutes. In cloudy or humid weather, the process can take 2-3 hours. It is important to achieve complete drying, especially at the docking of the bottom and cylinders, so that mold does not form during the packaging. Using a compressor on the blowing greatly accelerates this process.