Searching for information about small-sized swimming aids often turns into a real detective, especially when it comes to time-tested models. Boat 44 It is one of those legendary examples of Soviet and post-Soviet shipbuilding, which is still actively used by fishermen and hunters throughout the country. website In the modern sense of the word is almost impossible, as mass production of many of these models was discontinued or repurposed.
Owners often face the need to replace or sew new tentBecause the original fabrics have been in disrepair for decades, and the lack of a centralized parts manufacturer makes you look for the blueprints and the patterns yourself, and it requires understanding the design of your own modification, because even within one model, there could be changes.
In this article, we will look at where to look for relevant information, how to properly remove the dimensions for the awning and what to look for when restoring or tuning this classic boat, you will learn about the materials that will extend the life of your vessel, and about the legal aspects of ownership.
The lack of a single official website
The search situation official website For the Model 44 boat, the historical context complicates it, and in Soviet times, these boats were produced in a number of small rubber technical products (RTI) factories across the country. Guests They were one, but branding didn't exist, so today you won't find a single domain name where you can order an original tent or parts.
Modern manufacturers offering awnings under boat 44 are usually private workshops or small enterprises specializing in sewing awning products from the sea. PVC They adapt standard sizes to modern materials, and it's important to understand that "official" is replaced by a reputation for craftsmanship or firm.
⚠️ Warning: Beware of sites that market themselves as the "only official factory" and require prepayment for non-existent original parts.
To find relevant offers, it is better to use specialized forums of water engines or announcement platforms, where sellers post real photos of their works. Tent fabric Other manufacturers may have different density and color, so visual evaluation is critical.
Design features and dimensions
Boat 44 belongs to the class of rowing inflatable boats, but its design often allows the installation of a small boat. outboardModel dimensions may vary slightly depending on the year of manufacture and the specific manufacturer, but the baseline parameters remain stable: the length is usually about 240-250 cm, and the width inflated state is about 120-130 cm.
When planning the sewing of the awning, you need to take into account not only the length and width of the cylinders, but also the height. transomThe tent must sit tightly on the body, not sail on the go and reliably protect against precipitation, errors in measurements even by 2-3 centimeters can lead to the fact that the awning frame will deform the cylinders or, conversely, dangle.
Below is a table with the approximate dimensions that are most common in boat 44 modifications, which will help you navigate before you start measuring.
| Parameter | Value (cm) | Admission |
|---|---|---|
| Full length | 245 | ± 5 |
| Full width | 125 | ± 3 |
| Diameter of the cylinder | 34 | ± 1 |
| Load capacity | 250 kg | - |
A critically important parameter is the distance between ducks (mounts for oars), as the frame of the tent is often tied to them. If you plan to install an awning with a frame of duraluminium tubes, the accuracy of these measurements determines the stability of the entire structure.
Choice of material for awning: PVC or Oxford
When you are faced with the choice of material for a new tent, you will face a dilemma: use modern awning. reinforced PVC ornamental Oxford Both materials have their pros and cons, and the choice depends on the operating conditions of your boat.
Oxford fabric is lighter in weight and cheaper, making it a popular choice for seasonal use, easy to fold and takes up minimal space in the trunk of a car. polyurethane It may start to peel off, requiring restoration.
- 🌊 Waterproof: PVC guarantees 100% protection even in heavy rain, while Oxford may eventually begin to let moisture through the seams.
- ☀️ UV resistance: Specialty additives in marine PVC protect the material from burnout better than budget options from Oxford.
- ❄️ Frost resistance: At temperatures below -20°C, Oxford tans and can crack on the folds, while quality PVC retains elasticity.
If your boat 44 is to be stored on water or used frequently in rainy weather, you should invest in the water. PVC tent For rare trips in dry weather, an easier option is also suitable.
When ordering an awning from Oxford, be sure to require gluing all the seams with a special tape, otherwise water will seep through the holes from the needle.
Technology of sewing and installation of awning
The process of creating a tent for boat 44 begins with the removal of patterns. Don't try to do it "by eye." Use soft roulette and fix all the curves of the cylinders. Patterns. The allowances for seams, which are usually 1.5 to 2 cm on each side, may be greater when working with thick materials.
The installation of the finished product also requires compliance with the technology, first the boat must be fully pumped and allowed to stand for a while for the cylinders to take their final shape. Tent case, tension should be uniform, without distortion.
⚠️ Warning: Do not place the awning on a wet boat. Moisture left under the fabric will cause mold to form quickly and the material to rot in no time.
Fastex belts or rubber cords with hooks are often used to fix the awning, it is important that the fastening points do not rub against the sharp edges of the transom or fittings. If necessary, the contact points should be protected. sticker from the same material from which the tent is made.
☑️ Check before installing the tent
Tuning and modernization of the boat 44
Owning boat 44 offers a lot of tuning options, and many owners don't just replace the awning, but completely upgrade their boat. inflatable keel (NDND), if the design of cylinders allows it, or strengthening the bottom with additional sludge.
The system of fastening is also often upgraded. cans (seats)Standard wooden boards are replaced with lightweight aluminum profiles or plywood coated with Laidak, which not only improves the appearance, but also increases the durability of seats that swell less from the water.
Special attention should be paid granuleIf you plan to use a motor that is more powerful than 2-3 hp, a standard transom may require reinforcement. Installation of an additional timber or replacing the plywood with thicker and better marine plywood will protect you from trouble on the water.
- 🔦 Lighting: Installation of LED tape around the perimeter of cylinders inside the boat will ensure safe movement in the dark.
- 🎣 Anchor system: The organization of the correct anchor and anchor tile on the bow of the boat will simplify fishing.
- 📦 Germies: Integration of pockets into the awning itself for storing small things, phone or documents.
Competent tuning turns a simple rowing boat into a full-fledged small-sized vessel, suitable for serious rest.
Can I put a 5 hp engine on a boat 44?
Technically, yes, many people do. But the passport load capacity and the transom design may not be designed to be that powerful, which increases the risk of trenching and requires shifting the load to the nose, and do it at your own risk.
Rules of storage and conservation
To ensure that your boat 44 and new awning last as long as possible, you must comply with storage rules. After each operation, especially in salt water, the boat must be thoroughly rinsed with fresh water. salt It is an aggressive agent that destroys adhesive sutures and fabric.
Drying is a must. You can't roll the boat wet. If you can't dry it completely, at least you have to turn it around and let it dry. Tent material It also requires care: it can be cleaned with a soft brush with soapy solution, but aggressive chemicals or solvents cannot be used.
Keep the boat in a straightened or half-folded state at room temperature. Sharp temperature changes and cold storage can negatively affect the elasticity of materials. Regularly check the pressure in the cylinders during storage to identify possible factors. microtrauma.
⚠️ Warning: Never keep the boat near heaters or open flames. PVC materials and rubbers can release toxic substances when heated and can easily ignite.
Compliance with the rules of drying and storage increases the service life of the boat 44 and the tent by 2-3 times, saving significant funds on repairs.
Legal aspects and registration in GIMS
The issue of registration of boat 44 in GIMS (State Inspectorate for Small-Sized Vessels) is often controversial. According to the current legislation of the Russian Federation, small-sized vessels with a weight of a loaded vessel of more than 200 kg or with an installed engine capacity of more than 8 kW (about 10.88 hp) are subject to registration.
The boat 44 itself, as a basic set, weighs well below 200 kg. However, if you put the engine on it, the weight of the engine is added to the weight of the boat. If the total weight exceeds the limit, or the power of the engine is above 10.88 hp, the presence of the engine is not limited. boat registration certificate I'll be sure.
It is also important to consider that even for unregistered boats there are rules of conduct on the water, the presence of life jackets by number of passengers, anchor and scoop is a mandatory safety requirement. fine When checking documents by the inspector.
Do I need a license for a boat 44 with a 2 hp engine?
If the boat weighs less than 200 kg, then the license is not necessary, but technical inspection (for registered) and compliance with the rules of navigation are always mandatory.
Frequently Asked Questions (FAQ)
Where can I find the exact drawings of the tent for boat 44?
There are almost no factory drawings available, and the best way to do this is to remove the patterns yourself from your boat or go to a specialized awning workshop, where the craftsmen have experience with this model and can use their proven patterns.
What is the life of a PVC awning?
When properly operated and stored, a quality PVC reinforced awning lasts 5 to 10 years. Oxford lasts less, usually 3 to 5 years, depending on the intensity of the UV exposure.
Can I make a tent on boat 44 myself?
Yes, this is possible if you have the skills to work with a sewing machine that can sew thick materials, and access to an industrial dryer for gluing seams (if you use PVC), but for the first attempt, you better choose Oxford, which is easier to sew.
How much will it cost to sew a new tent?
The price depends on the material and complexity of the design. Basic awning shelter from Oxford can cost from 3000 to 5000 rubles. PVC tent with a frame and windows will cost 8000-15,000 rubles and more.