The modern market of inflatable floating vehicles is full of offers, but the model Aqua 3200 NDLD It's been a success for several seasons, and it's no coincidence that the low-pressure inflatable floor design offers a unique balance between comfort and ease of transportation. Unlike the classic soldering, it doesn't have the hard elements at the base, which fundamentally changes the way we build and store.
Many aquatic motors choose this format, when the priority is the ability to quickly assemble one person without losing driving qualities. inflatable floor It allows you to use the boat in conditions where there is a high risk of damage to the hard deck on the stones or the shell, and the shape of the hull is designed to minimize water resistance, providing a confident exit to planing even with medium-power engines.
In this article, we will take a look at all the technical details, from the geometry of cylinders to the nuances of operation in windy weather. Aqua 3200 It is often the number one choice for fishing and relaxing on the water, and what real loads it can withstand.
Design features of the shell and cylinders
The basis of reliability of any PVC boat lies in the materials and assembly technology. Aqua 3200 NDLD It is made of five-layer reinforced material that is resistant to ultraviolet, fuel and mechanical damage. The density of the fabric is 750 g / sq.m., which is the optimal indicator for boats of this class, providing a balance between strength and weight.
The key feature of the design is the use of floor-floor This solution achieves high internal pressure, turning a soft-looking floor into a rigid plane that can withstand the weight of passengers and cargo, and the sides have a reinforced structure with a timber around the perimeter, which protects the cylinders from abrasion.
⚠️ Attention: When pumping the bottom of the NDND, strictly monitor the gauge readings. Pumped in the heat bottom can deform or burst, and under-pumped - will turn the boat into a "banana" that can not be brought to plane.
The tightness is ensured by double-stitching and the use of high-quality adhesives. quiltThis is especially important when you're going against a wave or when you're going in a side wind, when the boat can take a lot of damage.
Technical specifications and specifications
To understand the real potential of the boat, you need to turn to dry figures. Aqua 3200 belongs to the class of three-meter boats, which makes it quite roomy for 2-3 people, but still transportable in the trunk of a passenger car in a disassembled form.
Below is a table with the main parameters that will help you match the boat’s capabilities to your needs:
| Parameter | Meaning |
|---|---|
| Length full, cm | 320 |
| Full width, cm | 156 |
| Diameter of the cylinder, cm | 40 |
| Load capacity, kg | 500 |
| Boat weight (without motor), kg | 38-42 |
It is worth noting that loading capacity 500 kg is the passport value. In practice, for comfortable and safe operation, especially on the wave, it is recommended not to exceed 70-80% of this value, this will maintain high swelling per wave and handling.
Deck, cockpit and ergonomics
The interior of the boat Aqua 3200 NDLD It's designed with ergonomics in mind, and the inflatable floor allows you to move around the cockpit without fear of falling between the floorboards, as you would with older models, and you get a flat floor that's elastic, which reduces the fatigue of the legs when you park a lot.
Side-by-sides set. liner-line It's a stretcher that's used to hold the safety ends and make it easier to pull the boat ashore, and the bow has a pouch for anchoring, and the aft has a mounting for mounting. transom-wheel The track is made of moisture-resistant plywood and is covered with protective paint, withstanding powerful motors.
- 🚣♂️ Comfortable accommodation: The width of the cockpit allows two adult fishermen with full gear to comfortably accommodate.
- 🔒 Reliable fastenings: reinforced grip handles and liner cable ensure safety during mooring and transportation.
- 🎣 Fishing options: the ability to install additional mounts for spinning and sonar directly on the cylinders.
For the convenience of fishing on NDND, you can use a light removable seat on a transom can, which will not interfere with the inflating of the bottom during assembly.
Motor compartment and compatibility with PM
Choosing a motor for Aqua 3200 The transom design allows for motors up to 10-12 hp, but the optimal range is considered to be engines from 5 to 9.9 hp. With such engines, the boat confidently goes into plane with two passengers on board.
It's important to remember that the inflatable floor has its own hydrodynamics, and when you go into glitter mode, the angle of the different may be different from the hard bottoms. transmutation (use of the underlay washers or adjusting the inclination of the engine's lower unit) is a mandatory procedure to achieve maximum speed.
When installing a motor with a capacity of more than 8 hp, it is strongly recommended to use slab-stove Or a hydrofoil to improve propeller stress and reduce yaw at high speeds, which is especially true for round bottom boats, which is NHD.
⚠️ Warning: Never start the motor out of water or with a raised lower unit without supplying water to the pump, this will cause instantaneous overheating and destruction of the water pump seals.
Package and additional accessories
Standard equipment usually includes the boat itself, backpack bag, refit, pump and sometimes oars. Aqua 3200 You will need to buy a number of accessories, first of all we are talking about a high-quality anchor kit, corresponding to the weight of the boat (anchor weighing 3-4 kg).
It will also be a very useful acquisition. door-wheelGiven that the weight of a boat with an engine and a battery can reach 60-70 kg, dragging it along the beach is difficult and harmful to the material of the bottom, the wheels solve this problem dramatically.
☑️ Basic set for access to the water
Don't forget to protect yourself from the sun and rain. The 3200 is a great awning arc, not only saving you from the scorching sun, but also allowing you to continue fishing even in light rain, keeping your equipment and passengers dry.
Assembly, operation and care
The process of assembling a boat with NDL takes longer than that of a soldered boat, due to the need to pump the bottom. However, the technology itself is simple: first, the cylinders are pumped to the working pressure (usually 0.2 atm), then the bottom (up to 0.4-0.5 atm), after which the boat needs to be given time (10-15 minutes) to straighten the folds of the material.
In cold weather, the PVC material becomes rigid, and the assembly time increases. bottom It can take longer to spread, requiring periodic pumping in the first minutes of use, and it's important not to use open fire sources to speed up the straightening process.
How to dry a boat after fishing?
After operation, the boat must be washed with fresh water, especially if you have been swimming in salt water. PVC products should be dried in the shade, straightening all the folds. Direct sunlight combined with residual humidity can lead to mold or deformation of glue seams. Do not pack a wet boat in a bag!
Regular inspection for cuts and scuffs will prolong the life of your boat, pay special attention to the docking places of the bottom and cylinders, as well as the timber. Timely repair of minor damage with a remplekt will prevent the development of large tears.
The main advantage of Aqua 3200 NDND is the possibility of year-round operation and high cross-country through shallow water due to the soft bottom, which is not afraid of stones.
Comparison with competitors and final conclusions
In the face of competitors such as Flagship or huntermodel Aqua 3200 It's a very affordable, very high-quality material, and it's a little bit faster than the floorboard boats, but it's a lot better off in terms of comfort and safety inside the cockpit.
If you're prioritizing fishing with a friend, hunting or just family trips where stability and gentleness are important, then this is the perfect option.
In conclusion, it may be said that Aqua 3200 NDLD It is the middle ground in the inflatable boat world, and does not require driving rights (with an engine up to 10 hp and a length of up to 3 meters, which should be specified in the current GIMS rules, since 320 cm is a border value), is easily transported and ready for any tests.
Should I buy a used Aqua 3200?
Buying a used boat is justified if the material is not "oak" and the seams do not flow. Check the pressure by pumping the boat for a day. If the pressure has not dropped visually in 24 hours, you can take the boat, even if there are cosmetic defects that are easy to fix with a remix.
Do I need to register the Aqua 3200 boat with GIMS?
Under current regulations, registration is required for small vessels weighing more than 200 kg (in running order) or with an engine power of more than 8 kW (about 10.88 hp). Since the boat is 3.2 meters long and usually weighs less than 200 kg, registration may not be required when installing a motor up to 10 hp, however, the legislation changes, and the final decision depends on the water inspector and the total weight of the kit (boat + motor + battery + equipment).
What pressure to pump into the cylinders and bottom?
The optimum pressure in cylinders is 0.2 - 0.25 atm (150-190 mm Hg. st.). The bottom of the NDND requires a higher pressure - 0.4 - 0.5 atm. Always take into account the air temperature: in the sun the pressure inside the chambers will increase, so in the heat it is better to underpump the boat by 10-15% of the norm.
Is it possible to use a boat in winter?
The PVC material retains elasticity to sub-zero temperatures, but in severe frost (below -15 ° C), it becomes brittle. Exploitation is possible, but requires extreme caution when in contact with sharp edges of ice. Keeping the boat in the cold is not recommended, since the plastic loses its properties when exposed to prolonged low temperatures.