Choosing a swimming aid for fishing or recreation always involves finding a balance between carrying capacity and mobility. Aquilon 360 It occupies a special niche in the inflatables segment, offering users an increased cockpit area without critical weight gain, and it is not just another modification, but a thoughtful design for those who have a standard three-meter options are not enough.
Many owners say that this 3.6-meter length is the middle ground for a crew of two or three, and can be comfortably accommodated with a full suite of equipment without sacrificing stability. Designers have focused on bottom rigidity and cylinder protection, making it possible to operate in challenging conditions.
Considering specification This model, which is not to mention the use of high-quality reinforced PVC, provides durability and resistance to puncture, which is critical when going out to the wild shores or rocky bottom. The reliability of seams and fittings here comes to the fore, determining the service life of the entire product.
Design features and materialsThe basis of the longevity of the boat is five-layeredThe material is 750 g/k2 in density, which allows it to withstand significant mechanical stresses and temperature changes. Unlike budget analogues, it uses a fabric with a high density of thread weaving, which excludes deformation when pumped to working pressure.
Special attention was paid to the engineers transmutationThis solution minimizes friction when installing the outboard motor and protects critical mounting units, and is tightly sealed by using two-part adhesive and cross-gluing technology.
High-pressure inflatable floor (HPD) or hard plywood floorboard (depending on the modification) creates a rigid platform. hydrodynamicsThe hard floor, in turn, gives a sense of stability comparable to metal boats.
The fittings used in the design are made of high-strength plastic or stainless steel. The cylinder pump valves have a robust locking system to prevent spontaneous etching of air. quality control before assembly, which reduces the risk of marriage to a minimum.
Body geometry and behavior on waterThe most important aspect of the operation is the shape of the cylinders. Aquilon 360 technology applied flattened-toeThis geometry reduces the likelihood of burrowing your nose even when you're going against the wind.
The stability of the vessel is achieved by wide onboard cylinders, even with a sudden movement of cargo or rising in full risk. tipping This is especially appreciated by anglers who need to do active cutting or work with large trophies right on board.
When you install the engine, the boat shows a great germination for glides. Because of the streamlined shape of the stern, water spray is effectively thrown to the sides, keeping the cockpit dry, but it is worth remembering that weight distribution plays a key role in handling.
⚠️ Warning: When going out on the water in windy weather, be sure to use a cat anchor or cargo to hold the position, since the sailing of the inflatable sides is high.
Compatibility with motors and speedThis model is a propulsion boat, but its full potential is realized with an outboard motor. The recommended engine power varies from 5 to 15 hp, depending on the load. The optimal choice for solo fishing will be a 9.9 hp engine.
When installing a 15-horsepower engine and a crew of two people, the speed can reach 30-35 km / h However, to save fuel and save the engine life, trolling or moderate travel mode is most often used. Tranza It can withstand the vibrations of powerful two-stroke and four-stroke units.
☑️ Check before exit with the motor
A humming wheel or remote control is used to control speed and direction of travel (when installing the appropriate kit). differentiation, having chosen the position of the engine and the location of the cargo, so that the boat went smoothly, without yaw.
Electric motors are also possible, especially in areas with noise restriction, and the battery should be charged in a sealed box at the bottom of the cockpit to improve alignment.
Installation and interior equipmentStandard equipment usually includes the vessel itself, the carry bag, the remix and the seats (banks), the seats are made of moisture-resistant plywood with soft linings, which provides comfort for a long time. pockets Or the lyctroses.
Along the sides are often straps (safety ropes) that can be held up when swimming or that are used to fasten equipment, carry handles on the bow and in the stern are provided, reinforced with metal inserts, which facilitates descent and loading into the car.
Small items can be stored with pocket bags attached to the cockpit, which are convenient for carrying gear, documents or mobile phones. drain-valve It allows you to quickly remove water that has got inside without tilting the boat.
How to properly store the boat?
Store the product in a deflated state, but not folded, and folded at room temperature. Do not allow direct sunlight on the packed boat, as inside can create a greenhouse effect that destroys glue. Every six months it is recommended to blow the cylinders to straighten the folds.
Maintenance and repairInflatable vessels require regular maintenance to maintain their performance, and after each sortie, the hull must be thoroughly washed with fresh water, especially if operated in salt water, and sand and dirt, stuck in folds, work like an abrasive.
The pressure in the cylinders should be checked before each exit, insufficient pressure leads to deformation of the bottom and lower driving performance, and excessive pressure leads to the risk of rupturing the seams in the sun, use a pressure gauge for fine tuning.
If you have punctures or cuts, use the included belt kit, the damage site is degreased, cleaned and sealed with a special composition.more than 3 cm) it is better to contact a specialized workshop.
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 360cm | Dimension inflated form |
| Width | 160-170 cm | Depends on the pressure. |
| Load capacity | 600-700 kg | Including boat weight |
| Weight of kit | 45-55 kg | No motor. |
| Passenger capacity | 3 people. | GIMS standards |
For quick drying of the boat in the field, use the car compressor in blow mode (if there is such a function) or simply leave it in the straightened form on the draft, avoiding direct sun.
Safety and operating rulesAny boat requires safety, and life jackets are a must for every passenger, and even if you're confidently floating, cold water or current can be a bad joke.
It is not recommended to exceed the maximum loading capacityThe overloaded boat becomes unstable and the cylinders are in a critical state of stress, which increases the risk of an accident. Always leave a buoyancy reserve.
⚠️ Attention: It is strictly forbidden to use open flames near an inflated boat, since the PVC material emits toxic substances when burning.
When operating at night or in poor visibility, light sources and audible signals must be on board, a navigational safety requirement that may lead to collisions with other vessels.
Safety on the water depends not only on the quality of the boat, but also on the discipline of the crew and the availability of rescue equipment.
Reviews and final opinionAnalyzing the opinions of users, we can highlight the high estimation of ergonomics and spaciousness of the model. Aquilon 360The owners praise the hardness of the floor and the ability to comfortably fish together with full gear, making the boat a great choice for a weekend tour.
The downsides are sometimes weight-assembled, requiring a wheeled transom or a descent aid, but they are a cost for increased reliability and seaworthiness. For single-seater fishing, this may seem redundant, but for family vacations, it is ideal.
In conclusion, it is worth saying that Aquilon 360 It is a balanced solution for those who are looking for reliability and comfort, and proper care and compliance with the rules of operation will allow you to enjoy water walks for many years without serious investment in repairs.
Do I need to register with GIMS for the Aquilon 360?
Registration is required if the weight of the curbed vessel (boat + engine) exceeds 200 kg, or if the engine power exceeds 8 kW (about 10.8 hp). If you use a motor up to 10 hp and a light boat, registration may not be required, but the rules may change, so it is worthwhile to clarify the current regulations.
What pressure to pump into cylinders in winter?
In winter, at low temperatures, the pressure in the cylinders drops. However, you can not pump them into the tension in the heat - when you go out into the cold or, conversely, when you heat up in the sun, the pressure will change. Pump to the working pressure (usually 0.2-0.25 atm) immediately before launching, taking into account the ambient temperature.
Can I leave the boat in the sun?
Long exposure to direct sunlight is not desirable. Ultraviolet disrupts the structure of PVC and increases internal air pressure, which can cause seam strain. If you're on the water, that's OK, but you don't need to store a decomposed boat under the scorching sun.