Choosing a boat for fishing or outdoor activities on the water always involves finding a compromise between carrying capacity, weight and comfort. Aquilon 390 NDLD The domestically produced model has become a benchmark in the mid-sized inflatable boat segment, offering a unique combination of a strong inflatable floor and a wide hull, which makes it possible to forget about the heavy plywood floorboard, while maintaining excellent seaworthiness and the ability to install a powerful outboard motor.
Unlike classic models with a hard bottom, it uses technology. Low Pressure High PerformanceOwners often point out that the boat behaves on the water like a full-fledged boat, confidently cutting the wave without choking with splashes, and these specifications have made this modification one of the most popular among water-engines who value reliability and practicality.
It should be noted immediately that Aquil 390 It's not just an inflatable toy, it's a serious tool for overcoming large water spaces, and the design of the cylinders and the bottoms is designed to minimize water resistance and maximize the usable area of the cockpit, and we'll go through all the technical nuances that are behind this name in detail below.
Design features and materials
The basis of durability of any inflatable boat is the quality of the materials used. Aquilon 390 PDND is used five-layer reinforced PVC fabric density of 850 g / sq.m. This material has high resistance to abrasion, exposure to fuel and ultraviolet radiation. The seams are made by hot welding, which guarantees absolute tightness even during prolonged operation in extreme conditions.
The system deserves special attention. NDMA (Low Pressure inflatable floor) Unlike high pressure inflatable floor (HDPL), it uses a multi-layered structure with internal stretches to create a flat and rigid surface at relatively low pressure, which has two key benefits: less weight assembled and the ability to blow the boat away without completely disassembling it, which is impossible with a rigid floorboard.
- 🚤 Five-layer PVC: It provides protection against punctures and long service life even in contact with stones.
- 🛡️ Hot Air Welding Technology: The seams do not flow or diverge, withstanding temperature deformations.
- 📏 Balloon geometry: The special shape of the nose reduces the impact load on the body when flown on the wave.
⚠️ Warning: Despite the high strength of the material, avoid contact with PVC with gasoline or oil for a long time.
The design also includes reinforced perimeter hinges, which not only protect the cylinders from abrasion on the pier or shore, but also provide a reliable support when boarding a boat, in the bow there is an anchor shaft, and in the aft there are convenient handles for carrying and fastening the transom.
Performance and seaworthiness
When it comes to the real experience of water, Aquil 390 The wide cockpit and high landing allow three adults to sit comfortably without interfering with each other's rowing or fishing. The inflatable floor creates a cushioning effect, making the swing less noticeable and tedious for the crew.
The seaworthiness of the model depends on the installed power of the engine. The boat perfectly holds the planing even with two passengers and cargo. Due to the shape of the cylinders, it is not prone to yaw and well holds the course. During the oncoming wave, the nose does not burrow, and the soft bottom extinguishes the impacts, maintaining the integrity of the structure and the calmness of the passengers.
Wind resistance is an important parameter. High cylinders create sailing, but the low center of gravity, because of the position of the passengers at the bottom, compensates for this effect. In calm, the boat goes soft and silent, and on the wave requires careful management, but fully meets the expectations of its class.
To improve the course stability in high winds, it is recommended to use transom wheels or weighting the bow with an anchor, if the boat is used mainly for fishing from anchor.
Compatibility with motors and speed indicators
Train boat Aquilon 390 NDLD It is made of moisture-resistant plywood and reinforced with linings, which allows you to install outboard motors with a capacity of up to 15-18 hp (depending on the modification of the transom and the year of release). The optimal power for entering the glise with a full load is the range 9.9-15 hp.
With a 9.9 hp engine, the boat confidently goes into planing with one or two passengers, developing a speed of about 30-35 km / h. Installation of the 15-horsepower unit allows you to accelerate to 40-45 km / h, turning a walk into a dynamic journey. It is important to choose the right daywire and the angle of the engine to achieve maximum performance.
| Engine power (hp) | Number of passengers + cargo | Mode of traffic | Average speed (km/h) |
|---|---|---|---|
| 5.0 | 1 person + 20 kg | Water-displacement | 8-10 |
| 9.9 | 2 people + 40 kg | planing | 32-35 |
| 15.0 | 3 persons + 60 kg | planing | 38-42 |
| 18.0 | 2 persons + 30 kg | Maximum stroke | 45+ |
It is worth remembering that the real speed figures depend on the screw, the state of the bottom and hydraulic conditions. Using a screw with the right pitch allows the engine to operate in the optimal range of revolutions without overheating or under-powering.
The optimal balance between fuel consumption and speed for the Aquilon 390 is achieved on engines with a capacity of 9.9-15 hp with a screw selected for a specific load.
Assembly, storage and transportation
One of the main advantages of the design NDMA It's easy to get ready to go down, so you don't have to spend time laying heavy sheets of plywood and fighting stringers, but the assembly process is basically pumping the cylinders and the bottom, which takes 15 to 25 minutes depending on the pump you use.
For transportation, the boat is packed in a sturdy bag, and its packaged dimensions allow it to be placed in the trunk of most wagons or crossovers, and sometimes large sedans, weighing about 45-50 kg, which requires the participation of two people for comfortable carrying over long distances.
- 💨 Pumping: It is recommended to use a pressure pump, controlling the pressure in the compartments (usually 0.2 atm for cylinders and 0.25 atm for the bottom).
- 🎒 Packaging: The bag is equipped with comfortable handles and straps for carrying on the shoulder.
- 🏠 Storage: When folded, the boat takes up a minimum of space in the garage or pantry.
While PVC is frost resistant, it is better to store the product at positive temperatures to avoid clamping. In summer, do not leave the boat in direct sunlight in a fully pumped state, as the pressure inside can exceed critical values.
The secret to fast drying
After fishing, do not pack the wet boat immediately, leave it in the shade for 1-2 hours with the valves open, which will prevent mold and unpleasant odor, prolonging the life of the fabric.
Tuning and useful equipment
Basic equipment Aquil 390 It's functional, but to unlock the potential of the boat, many owners have resorted to tuning, fishermen often install additional ridges to attach the awning or sonar, and inflatable seats that are attached to special cans or directly to cylinders are also popular.
To improve safety and comfort, it is recommended to purchase a cat anchor weighing 3-5 kg and a faal at least 10-15 meters long. The inflatable floor allows you to move freely through the cockpit, so installing additional lighting or tackle holders makes life much easier in the dark.
It will not be superfluous to purchase a remake and a special glue for PVC. Even the most durable material can suffer from a sharp hitch or stone, and the ability to quickly fix a puncture in the field is the key to a successful trip.
☑️ Basic set for the first fishing
Comparison with analogues and final conclusions
There are many boats of similar size on the market, but Aquilon 390 NDLD It's a very affordable, high-quality, competitive choice that often offers either heavier plywood-bottomed designs or much more expensive, high-pressure bottom designs, and the best balance is found here.
The model is ideal for amateur anglers, hunters and tourists who need a reliable boat for every exit. It does not require complex maintenance, forgives the mistakes of beginners in assembly and can last decades with care.
To sum up, it is a universal solution for Russian water bodies. Wide hull, reliable materials and thoughtful ergonomics make it one of the leaders in sales in its class. If you are looking for a boat that will not fail at a critical moment and give comfort on the water, you should pay close attention to it.
What is the maximum load capacity of the Aquilon 390?
rated carrying capacity is 550-600 kg, however, for safe and comfortable plane with the engine, it is recommended not to exceed the load of 350-400 kg (including the weight of people, motor and equipment).
Do I need to lubricate the valves before pumping?
No special lubrication is required, the main thing is the purity of the thread and the absence of sand inside the valve so as not to damage the sealing gum.
Can I leave a boat with a puffed bottom in the sun?
It is strongly discouraged. When exposed to the sun, the pressure inside rises sharply, which can cause the seams to rupture. Always blow excess air or hide the boat in the shade.
Which pump is best used for NDND?
The best choice would be a two-stage foot pump with a gauge or an electric pressure-limited pump. Manual membrane pumps may be too time-consuming to pump a large volume of bottom.