Boat Aquilon NDND: Reliability and Comfort on the reservoirs of Russia

Choosing a boat for fishing or a family holiday on the water is always a search for a balance between price, quality of materials and functionality. In recent years, branded inflatable boats have taken a strong niche in the domestic market. aquilonThe most popular option is the low-pressure inflatable floor modification known as the "Low Pressure Bottom" which is a very affordable and practical option. NDMAThis design is radically different from the classic plywood floorboard models, offering a completely different level of comfort and build speed.

Why? Aquilon NDNDM Is becoming the number one choice for many anglers? The secret lies in the combination of strong reinforced PVC and a unique bottom design that ensures excellent seaworthiness. The use of a low-pressure inflatable floor allows you to create a rigid design without the use of heavy plywood or aluminum floorboards, which significantly reduces the weight of the boat in the assembly. This is especially important for those who have to transport equipment in the trunk of a car or carry it manually over long distances.

In this article, we will take a detailed look at all aspects of the operation of such boats, from the technical specifications to the nuances of care, so that you can make an informed decision about the purchase. bottom It is considered safer and more convenient, and which models are worth considering first.

Design features of the NDLD model

The main difference of boats aquilon The bottom of the NDND series is what you see here, and unlike traditional solutions where the floor is assembled from individual sheets of plywood, it uses a balloon system. Low pressure inflatable floor It's pumped to 0.2-0.3 of the atmosphere, which gives it a rigidity, but it retains elasticity, and this design makes the boat a single monocoque, where the sides and bottom are inseparable in an inflated state.

Many people mistakenly believe that the inflatable floor is less durable than plywood. However, modern PVC production technologies allow for materials that are resistant to puncture and abrasion. Internal partitions (stringer banks) provide the necessary rigidity for tearing and bending. aquilon uses for these purposes a high-quality five-layer material that withstands significant loads.

⚠️ Note: Do not exceed the operating pressure in the bottom cylinders specified in the product passport. The pumped bottom can deform in the sun, and the under-pumped bottom can reduce driving performance and lead to rapid wear of the valves.

Another important detail is the presence of keel-fileThe inflatable floor creates a pronounced keeliness that allows the boat to cut the wave better and stay on course more confidently when driving for an outboard motor. Aquilon NDNDM It is suitable not only for calm lakes, but also for large reservoirs, where there is often excitement.

Advantages and Disadvantages of Inflatable Floor

The switch to an inflatable floor structure gives the user a number of undeniable advantages that become apparent at the first operation, first of all, the speed of assembly and disassembly. You don't have to spend time laying out and fixing heavy floorboards inside the cockpit. Just pump the cylinders, and the boat is ready to get on the water.

In addition, the comfort of being in the boat is greatly increased. inflatable floor It works as a shock absorber, smoothing out the shocks of the wave. It's much more enjoyable to sit or stand on a soft, elastic floor than on hard plywood, especially in cold water or during long fishing. The legs are less tired, and the risk of injury from falling tackles is minimal.

• 🚀 Quick assembly: The boat assembles in 10-15 minutes without any physical effort to lay the floor.
• 🛡️ Safety: The absence of hard elements inside eliminates injuries from falling and increases unsinkability.
• 🎒 Compact: In deflated form, the boat takes up less space and has a more regular packaging shape.

But there are some nuances to note. NDMA They can be slightly heavier than their floorboard bottom counterparts due to more PVC material. They also require more careful care of the bottom surface, since it directly contacts the ground when pulling ashore.

It is important to understand that for installation transom-wheel Or additional equipment may require special attachments, because the classical methods of fixing on floorboards do not work here. aquilon Usually provides for regular spaces for such fasteners, but this must be checked in a particular model.

Technical specifications and model range

Boat line aquilon The inflatable floor covers a wide range of needs, from single-seat kayaks to full-fledged three-seat boats, all of which combine the use of high-quality reinforced PVC with a density of 750 to 1100 g/m2, depending on the series, which guarantees resistance to ultraviolet, gasoline and mechanical damage.

The size of the boats ranges from compact 2.8 meters to solid 4.2 meters or more. the load capacity of the models allows you to take on board not only passengers, but also the necessary equipment, fuel and catch. Working pressure In cylinders, it is usually 0.2 atm for the bottom and up to 0.25 atm for cylinders, which is easily achieved by a hand or foot pump.

For a visual comparison, consider the main parameters of popular models in the table below:

Each model is equipped with a reinforced chunkThe transom is often designed as a removable board, making it easier to pack, but also providing a rigid engine lock.

Materials and build quality

The basis of the durability of any PVC boat is the material and technology of its connection. aquilon It uses reinforced polyvinyl chloride, which consists of several layers: a polyester mesh base and PVC protective layers on both sides, which provides high tensile strength and tensile resistance.

We need to focus on the seams, and all the joints are done by the method. hot-glue This makes the seam stronger than the material itself, which prevents the joints from diverged even under extreme stress or temperature changes, and unlike cold gluing, the hot method creates a monolithic bond that is not afraid of water and time.

⚠️ Warning: When buying, be sure to check the quality of the seams for the presence of bubbles or non-progly ones. gluing defects can only appear under load, so visual inspection is mandatory.

Boats are equipped with reliable valves that do not poison the air, and convenient handles for carrying. Leer cableThe slinging around the perimeter not only reinforces the structure, but also serves to fasten the additional equipment, and all plastic and metal elements undergo anti-corrosion treatment.

Operation and maintenance of the boat

To the boat Aquilon NDNDM You've been in the service of this boat for years, and you have to follow simple rules of operation, and after every trip, especially if it was salt water or a body of vegetation, you want to rinse the boat with fresh water, and this will prevent the material from being destroyed by invasive substances and the organic residues from rotting.

Drying is a critical step. Before packaging for long-term storage, the boat must be completely dry. The moisture left inside the package can lead to mold and unpleasant odors that are very difficult to remove. It is better to dry in the shade, avoiding direct sunlight, because ultraviolet light, when exposed to long-term exposure, destroys plasticizers in PVC.

• ☀️ Keep the boat in a cool, dry place, in a straightened or slightly rolled up.
• 🧼 Use special cleaning products for PVC, avoiding aggressive chemicals and solvents.
• 🔧 Check the pressure in the cylinders regularly and pump them if necessary.

If you plan to store the boat in winter, make sure it is completely cleaned of dirt and dried. The optimal storage temperature is between -20 and +30 degrees, but it is best to avoid sudden changes. Repair kitThe package should always be at hand, even if there is no damage.

Comparison with competitors and price

In addition to other manufacturers, such as