The modern market of small craft is full of offers, but the model of the boat is not. Altair 380 NDLD It's a very stable position in the universal fishing and recreational watercraft segment, because of the combination of compactness in the assembled form and impressive water capacity, which is the length that many aquatic motorists choose because it allows them to ride the wave with confidence while remaining maneuverable enough for narrow ducts.
The main feature of the design is the type of floor. NDMA (Low Pressure inflatable floor) changes the performance of the vessel dramatically compared to the classic soldering system, so you don't have to build a heavy aluminum puzzle, and the boat itself behaves more predictably on the water, softening the shocks against the wave, but there are nuances to be aware of before buying.
In this article we will discuss in detail the technical specifications, real opportunities and hidden features of the model operation. Altair 380You'll find out why. cylinder height 48 cm It is critical for safety in high water and how to choose the right motor to achieve maximum speed.
Design features and materials
The basis of durability of any inflatable vessel is the material. Altair 380 It uses a five-layer reinforced PVC fabric with a density of 750 or 920 g/sq.m., depending on the modification of the year of manufacture, which provides high resistance to puncture, abrasion and ultraviolet light, seams are made by a tape method, which guarantees complete tightness even during prolonged use in salt water.
The design of cylinders has a complex geometry with protective linings in areas of increased friction. kylsonThis is especially important when you're going against the current or side wave, when the boat doesn't start to scour sideways, and the bow has a soft inflatable transom-nose support that also serves as anchor.
⚠️ Warning: When operating in hot weather, monitor the pressure in the cylinders. Excess pressure when heated in the sun can cause the seams to deform, so leave the boat in the shade or blow the air to the working value.
The trans board is made of moisture-resistant plywood and protected by plastic or metal linings, the transom is fastened to the cylinders through powerful slings with reliable carabiners, which allows you to quickly install or remove the transom, which is convenient for transportation, but requires regular check of the tension of the belts.
inflatable floor benefits (BBB)
Going to the bottom of the low pressure was a revolution for outdoor enthusiasts, the main advantage is the weight and speed of the assembly. You don't have to spend 20-30 minutes installing the floorboard, just pump the cylinders and the bottom. Altair 380 With NDNDM is collected by one person in 10-15 minutes, which is especially valuable when frequent trips to the reservoir.
The inflatable floor creates the air cushion effect, and when moving at high speed, the hull does not knock on the wave, but gently flows around the roughness of the water surface, which reduces the fatigue of the fisherman and allows you to take less equipment with you for comfort, and in addition, there are often storage compartments inside the bottom, which increases the useful volume of the vessel.
However, it is worth considering the physical properties of such a bottom. When abruptly entering the planing or when a strong load is shifted, the center of gravity can be shifted, and the bottom will bend (“play”). Altair 380 It's got longitudinal redans and reinforced stringers, and they take over the main load, keeping the fluid dynamics of the hull.
- 🚀 Assembly speed: The boat can be prepared for descent in 10 minutes without using an additional tool.
- 🌊 Comfort: lack of hard elements under the feet and a soft shock absorbing bottom.
- 🎒 Transportability: compact dimensions of the package, which can easily be placed in the trunk of the sedan.
- ⚖️ Weight: The total weight of the set is much lower than that of analogues with aluminum or plywood floor.
Dimensions and capacity
Model range altaïr 380 means a total length of 380 cm. This is the middle ground for two or three people. The width of the cylinders is usually about 160-165 cm, which provides sufficient stability. Even with active fishing or moving on a boat, the risk of tipping is minimal due to the competent distribution of cylinder volumes.
The interior space is divided into several compartments. Inflatable seats (cans) that can be moved along the length of the cockpit allow you to optimize the weight distribution. You can move the seats closer to the nose for passing shallow water or to the trench for fishing in the plumb. The model allows you to carry on board up to 500-600 kg of payload, including passengers, motor and equipment.
The optimal load for planing on a boat 380 cm is two people (total weight up to 170 kg) and a 9.9 hp engine.
A 48 cm height is a big indicator for this class, and it makes you feel confident in reservoirs with a large wind wave, splashes are less likely to overwhelm the cockpit, and boarding a boat from a high shore or a pier becomes safer, but the high side increases sailing, which should be considered in the wind.
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 380 cm | Including inflatable parts |
| Width | 160 cm | Outward contour of cylinders |
| Height of board | 48cm | Provides spatter protection |
| Load capacity | 550 kg | Considering the weight of the boat and the motor |
| Weight of kit | 42-48 kg | Depends on the density of PVC |
Compatibility with motors and speed specifications
Selection of power unit for Altair 380 NDLD The manufacturer recommends that motors be installed between 9.9 and 15 hp. Two-stroke 9.9 hp (often converted 15-strong with a limiter) are the most popular option. They easily take a boat with one fisherman to planing and have an acceptable fuel consumption.
When you install a 15 hp engine, speeds improve, but the weight on the transom increases, which can critically affect the differentiation. The boat can start pecking with its nose. In such cases, you need to move the battery and tank closer to the nose or use remote fuel tanks. Maximum speed with one passenger can reach 30-35 km / h.
It's important to get the right data-wheel. For NDNDM, often the best way to raise the motor is to lower the water resistance, but there's a risk of cavitation and overheating. Experimentally find a position where the boat is going straight, without yawing or splashing.
The secret to fuel economy
Use a screw with a pitch corresponding to your load. For fishing, two people often prefer a screw with a smaller pitch, which will provide a quick exit to plane, even if the maximum speed is lower.
For trolling. Altair 380 It's perfect. A large area of the inflatable floor is able to dampen the vibrations from the electric motor or the low speed of the gasoline engine, so you can do the baits naturally, without the noise that scares the fish.
Package and additional options
Standard equipment usually includes the boat itself, removable seats, bag-package, remix and passport. However, dealers often offer extended versions. It is worth paying attention to the presence of an inflatable keel. It greatly improves the stability of the course, but adds time to build and weight.
Among the useful options are rod holders that fit into cylinders and anchor rings, and an important element is perimeter protection, called a "vessel timber," which takes the impacts when mooring against concrete walls or berths.
- 🎣 Fishing accessories: the possibility of installing sonars, holders of spinning and tables.
- ⚓ Fixing equipment: anchor ducks, tent-tenting lintels.
- 🛡️ Defense: Additional overlays on the bottom for rocky beaches.
- 💡 Lighting: Places for fastening of running lights (required for night navigation).
⚠️ Warning: Do not keep the boat assembled in the garage in winter unless the room is heated. Frost makes PVC fragile and any careless movement can lead to cracks.
Rules of operation and maintenance
And Altair 380 After every trip, especially on salt water or in a muddy environment, the boat must be washed with fresh water, and the sand and salt act as an abrasive, gradually destroying the protective layer of fabric.
Drying is a critical stage. Even if the boat seems dry, there may be moisture in the folds of the fabric and under the valves. This is a direct route to mold formation and rotting of the reinforcing layer. Dry the boat in the shade, fully straightened, for 24 hours.
☑️ Annual TO boats
Small puncture repairs are easily done on their own with a remix, the main thing is to degrease the surface and use a quality glue (usually polyurethane), and major damage is best entrusted to professionals in specialized workshops that use hot vulcanization.
Proper drying and storage at temperatures from -10 to +40 degrees Celsius extend the service life of PVC materials by 2-3 times.
FAQ: Frequently asked questions
Can I use Altair 380 NDND for sea fishing?
Yes, the height of the side 48 cm and the durable material allows you to go to sea, but you should consider the distance from the shore and weather conditions, for the high seas prefer models with a rigid hull or longer length.
Which pump is best used for an inflatable floor?
For primary pumping, a high-performance foot or electric pump is suitable. For final pressure-taking, be sure to use a pressure pump (for example, a pump pump) so as not to pump the bottom and damage the seams.
How many people are comfortably accommodated in a 380 cm boat?
The most comfortable in Altair 380 It's going to be two adults, plus equipment, three people fit, but it's going to be a high-density mode, which will affect the speed and stability of the boat.
Do I need to register this boat with GIMS?
According to the current legislation of the Russian Federation, if the weight of the outfit vessel (boat + engine) exceeds 200 kg, registration is mandatory. Altair 380 light motor often fits into the limit of up to 200 kg, but accurate calculation must be made on the basis of documents for a specific modification and engine.