Boat. Anchor 320 NDLD It's one of the most popular models for fishing and outdoor activities, and it combines strength, maneuverability and affordable price, making it a great choice for beginners and experienced water-engineers alike. 320th model It is equipped with a low pressure inflatable floor (LDPB), which provides additional stability and comfort when moving along the wave.
But before buying it is important to understand the nuances: what engines are suitable for this boat, how to operate it correctly and what engines are suitable for this boat. hiddenness This can affect your choices. In this article, we will analyze in detail. Anchor 320 NDLDIf you're looking for a reliable boat to fish on lakes or small rivers, this is the review for you.
Technical specifications of the boat "Anchor 320 NDND"
Model Anchor 320 NDLD It is a class of inflatable boats with low pressure inflatable bottoms, meaning that the bottom of the boat is not rigid (like RIBs), but not completely soft (like flat bottom boats), which compromises good stability while maintaining lightness and compactness during transportation.
Basic parameters:
- 📏 Length: 3.2 meters
- 👥 Passenger capacity: up to 3 people (maximum load – 450 kg)
- 🔧 Material: 0.9 mm thick PVC (5-layer reinforced)
- ⚡ Maximum engine power: up to 15 hp (recommended - 9.9 hp)
- 💨 Boat weight: ~35 kg (without motor and equipment)
- 🌊 Category of craft: C (suitable for navigation in coastal sea waters and inland waters)
The peculiarity of this model is transmutationHowever, when choosing a motor with a power close to the maximum (15 hp), it is worth considering that the boat can lose control at high speeds.
If you plan to use it Anchor 320 NDLD At sea or in large lakes, choose a motor with a power of no more than 9.9 hp - this will provide better course stability in choppy conditions.
Advantages and disadvantages of the model
Like any boat, Anchor 320 NDLD It has its pros and cons, and let's look at them in detail so you can make an informed decision.
Advantages:
- 💰 Price/quality: One of the most affordable boats in its class with good performance.
- 🚤 Universality: It is suitable for fishing, hunting, family walks and even short sea trips (if weather conditions are observed).
- 🔄 Ease of assembly: Low pressure inflatable floor simplifies the process of preparing for launching compared to hard bottom boats.
- 🛡️ Strength: 5-layer PVC is resistant to puncture and abrasion, which is important when operating on rocky shores.
Disadvantages:
- ⚠️ Motor limit: When installing a 15-horsepower engine, the boat can “bump your nose” at high speeds.
- 🌬️ Resilience on the wave: The NDNDM bottom is less stable than the hard one, so there may be “breakouts” of the bottom on a strong wave.
- 🔧 Maintenance: It requires regular inspection of joints and valves, especially after heavy use.
Many owners note that with the correct selection of the engine (up to 9.9 hp) and careful operation of the boat serves as a vehicle. More than 10 seasons without major breakdownsHowever, when buying a used model, it is worth especially carefully checking the state of PVC for the presence of microcracks.
Comparison with analogues: which is better?
There are many boats on the market of the same class to see why. Anchor 320 NDLD It is in demand, compared to the main competitors:
| Parameter | Anchor 320 NDLD | Flagship 320 | Corvette 330 | Bark 320 |
|---|---|---|---|---|
| Max, engine power. | 15 hp | 15 hp | 20 hp | 10 hp |
| Thickness of PVC | 0.9 mm | 0.9 mm | 1.1 mm | 0.75 mm |
| Boat weight | 35 kg | 38 kg | 42 kg | 32 kg |
| Type of bottom | NDMA | NDMA | NDVD | NDMA |
| Average price (new) | ~120,000 rubles. | ~135,000 rubles. | ~160,000 rubles. | ~95,000 rubles. |
The table shows that Anchor 320 NDLD It occupies the “golden mean” in terms of price / quality. Corvette 330 It benefits in strength and power of the engine, but it is also much more expensive. Bark 320 cheaper, but has a thinner PVC, which affects durability.
If you need a boat for a quiet fishing in small water bodies, Anchor 320 NDLD For sea walks or use on large lakes, it is better to consider models with high pressure inflatable floor (HDVD), for example, Corvette 330.
When choosing between NDND and NDVD, consider that high-pressure bottom boats are more expensive, but they hold the wave better and allow higher speeds.
Which engine is suitable for Anchor 320 NDND?
The choice of engine is one of the key points in the operation of this boat, and the manufacturer specifies a maximum power of 15 hp, but in practice this is not always justified.
1. Motors up to 5 hp (low power outboard motors):
- ✅ Ideal for quiet fishing on small lakes and rivers.
- ✅ Economical, easy to transport.
- ❌ Not suitable for moving against the current or in strong winds.
2. 9.9 hp (optimum):
- ✅ Allows you to reach speeds up to 25-30 km / h.
- ✅ They are well managed, do not overload the transom.
- ✅ Suitable for most water bodies, including small sea bays.
3. 15 hp motors (maximum permissible):
- ⚠️ They can cause a “nose-shoot” of the boat at high speeds.
- ⚠️ Requires a reinforced transector (sometimes it has to be refined).
- ✅ Suitable for experienced users who are willing to sacrifice comfort for speed.
When choosing a motor, also pay attention to its weight. Anchor 320 NDLD The optimal weight of the engine is up to 30 kg. Heavy models can shift the center of gravity and degrade handling.
⚠️ Attention: When installing a 15 hp motor, be sure to check the condition of the transom and, if necessary, strengthen it with an aluminum plate. Otherwise, cracks in the attachment sites may appear over time.
Operation and maintenance: how to extend the life of the boat?
Term of service Anchor 320 NDLD It depends on proper care, and here are the main recommendations:
Preparation for launch:
- 🔍 Check the pressure in the cylinders (optimal - 0.2-0.25 kg / cm2).
- 🧴 Apply special lubrication to the valves to prevent clogging.
- 🚫 Make sure there are no sharp objects at the bottom that can puncture PVC.
After use:
Wash the boat with fresh water (especially if used in salt water)|Dry in the shade, avoiding direct sunlight |Blow the cylinders by 30-40% to relieve stress from the material | Store in a case, protecting from dust and rodents->
Repair and storage:
- 🛠️ To seal the punctures, use a special glue for PVC (for example, Bostik 2402 or Clayberg).
- 📦 For long-term storage (winter), blow the boat completely and store it in a cool dry place.
- 🔥 Avoid storage near heat sources – this can warp PVC.
Many owners make the mistake of keeping the boat inflated in the winter, which leads to stretching of the material and loss of strength, and it is also not recommended to use aggressive detergents for washing - they can destroy the protective layer of PVC.
What if the boat started to let air through?
If you notice that cylinders deflate faster than usual, check the valves for leakage (you can blow them with soap solution). If the leak is not in the valves, check the seams and the bottom for micropunctures. A patched repair kit will be suitable for temporary repairs in the field, but on returning home it is recommended to carry out a full repair using professional glue and a press (for example, strubcines).
Tuning and improvements: how to improve the boat?
Even the factory equipment. Anchor 320 NDLD It leaves room for modernization, and here are some popular improvements:
Transnant reinforcement:
- 🔨 Installation of aluminum or plywood plate increases the stiffness and allows you to put more powerful motors.
- 🛠️ For fastening, use stainless bolts and sealant.
Installation of additional accessories:
- 🎣 Holders for fishing rods (for example, tubular or magnetic).
- 🔦 Backlight for night fishing (LED strips on 12V).
- 📱 Fastenings for sonar or navigator.
Bottom modernization:
- 🛶 Laying anti-slip coatings (such as rubber mats) improves grip and comfort.
- 💨 To increase stability, some owners install additional inflatable keels.
When tuning, it's important not to overload the boat, for example, if you install a heavy battery to power the sonar and backlight, you can shift the center of gravity. Always check the balance after you've done some work.
⚠️ Attention: When installing additional equipment (such as radar arches), make sure that it does not interfere with the control and does not create additional resistance to the wind, which is especially important for boats with low-power engines.
Where to buy and what to look for when choosing?
Purchase Anchor 320 NDLD It can be used both in specialized stores and on online platforms (for example, Avito, yula, Boat.ru.However, when buying a used model should be especially careful.
Checklist when inspecting the used boat:
- 🔍 Check it out. suture They must not be broken or have traces of repair.
- 🧴 Pay attention to this. PVC Burnt or yellowed areas indicate prolonged exposure to the sun.
- 🛡️ Check it out. valves for tightness (can be done with soap solution).
- 📏 Make sure that transmutant It's crackless.
The average price of a new boat is about 120,000 rubles. A used model can be found for 60,000-90,000 rubles, but there is a high risk of running into a "cat in a bag." If you do not know about boats, it is better to bring an experienced friend with you or order an independent examination.
When buying a new boat, pay attention to the equipment.
- 🛶 Boat with cylinders and bottom.
- 🧰 Repair kit.
- 📄 Passport and certificate.
- 🎒 Transportation case.
Additionally, oars, a pump and seats may be needed – they often have to be purchased separately.
FAQ: Answers to Frequent Questions
Can I use Anchor 320 NDND at sea?
Yes, but with reservations, the boat is classified as a "C" category, which allows you to go into coastal sea waters at a surge of up to 2 points, but for safety it is recommended:
- Use a motor with a capacity of no more than 9.9 hp
- Have communication equipment and life jackets.
- Avoid long distance swims from the shore.
Which pump is better for pumping?
For Anchor 320 NDLD Any high-quality boat pump with a pressure gauge is suitable.
- Bravo BT-12 (scabbing, with a gauge).
- Intex 68609 (electric, for quick pumping).
Important: Do not pump cylinders - the maximum pressure is indicated in the boat's passport.
How many people can fit in a boat?
The manufacturer specifies a maximum passenger capacity of 3 people, but in practice, 2 adults + child or cargo are comfortably accommodated. When fully loaded (450 kg), the boat becomes less manageable, especially on the wave.
Do I need to register a boat with GIMS?
Boats up to 3.6 meters long and up to 10.88 hp (8 kW) not registered However, if you install a more powerful engine (for example, 15 hp), the boat will have to register as a small vessel.
How do you transport the boat?
The boat may be carried:
- 🚗 On the roof of the car (in the cover, fastened with belts).
- 🚐 In the trunk (if it is spacious enough).
- 🛵 On the trailer (convenient for long trips).
Important: before transportation, blow the cylinders 30-40% to avoid damage from vibration.