In the world of domestic water transport model Azimuth Typhoon 350 It's a place of honor, offering anglers and outdoor enthusiasts a reliable solution for inland waters. flyboat It combines time-tested design solutions and affordable cost, which has made it popular for many years, and many water-engineers choose this option as their first serious purchase after the classic "Kandak".
However, despite the apparent simplicity, this model has its own nuances, which are worth knowing even before buying or self-assembling. Shell design And the materials that we use have a direct impact on the seaworthiness and durability of the product, and in this article, we'll go through the technical parameters, the operational features, and give you practical tips for care.
You have to find out why. Typhoon 350 It's often referred to as the "workhorse" of small boats, and we'll look at real-world payload and wave behavior, which are often different from passport numbers, and make a good decision about whether to buy this particular model for your needs.
Technical specifications and dimensions
The basis of reliability Azimuth Typhoon 350 The cockpit is designed to be a well-designed geometry of cylinders and bottoms, with a full hull of 350 cm, which allows two or three passengers to comfortably fit with a full set of equipment, and the width of the cockpit provides sufficient stability, but requires careful distribution of cargo when entering open water.
The most important parameter for any boating is the load capacity, and for this model it is stated in the range of 500-600 kg, but payload Depending on the condition of the material and the density of pumping cylinders, exceeding the recommended limits can lead to deformation of the transom and reduced navigation safety.
⚠️ Note: When calculating the weight of the crew and cargo, be sure to take into account the weight of the outboard motor and the full tank, as they fall on the stern, creating a critical gap.
Dimensions assembled and packaged also matter, especially if you plan to transport on the roof of a passenger car or in the trunk of a station wagon. When disassembled, the boat takes up a volume comparable to two tourist backpacks of large liter, which is convenient for storage in a garage or apartment.
- 🚤 Total length of body: 350 cm
- 📏 Bulk width: 145 cm
- ⚖️ Weight of the kit: about 45-50 kg (depending on the configuration)
- 🌊 Height of board: 38 cm
Materials and construction of the shell
For production Typhoon 350 High-density reinforced polyvinyl chloride (PVC) is traditionally used, and it has excellent resistance to ultraviolet radiation, fuel and mechanical damage. Five-layer structure fabric provides tightness and the ability to withstand temperature changes in a wide range.
The design includes an inflatable keel, which is an important advantage over flat-bottomed models. The keel gives the hull a hydrodynamic shape, improving wave germination and course stability. The boat takes about 15-20 minutes to assemble with minimal experience.
Features of seams
The seams in the Azimuth boats are made by hot welding, which ensures the monolithic connection. Unlike adhesive joints, the weld does not dry out over time and withstands high tear loads.
Tran is made of moisture-resistant plywood, covered with special enamel. Motor attachment It's done through a special stop that fixes the lower unit, and it's important to check the lacquer coating of the transom, because constant water can lead to the separation of wood.
- 🛡️ Material of cylinders: PVC reinforced (density 850-900 g / sq.m)
- 🪵 floorboard material: 9 mm moisture-resistant plywood
- ⚓ Presence of an inflatable keel: Yes
- 🔩 Type of joints: High frequency welding
Capacity and layout of the cockpit
Interior space Azimuth Typhoon 350 It's organized in a reasonably efficient way for its class, with two inflatable seats (cans) that allow for variations in the fit of rowers or anglers, and can be moved or removed if necessary, making room for a large cargo or catch.
Fishing is important to the attachment of equipment, along the side are the straps to which you can attach. fishing-ribbonHowever, it is worth remembering that excessive cluttering of the cockpit can make it difficult to move and reduce overall safety.
The layout also allows installation attachmentThe simplicity of the interior design makes it easier to wash and dry after use, which is critical to preventing mold from appearing.
Selection of the outboard motor
Selection of engine Typhoon 350 The design of the transom allows you to install motors with a capacity of up to 10-12 hp, but the best option for many owners is to consider engines in the range of 5-8 hp. This is quite enough for a confident exit to planing with one or two passengers.
When installing a more powerful motor, it should be taken into account that speed-response They're going to be power-driven, but they're going to be hydrodynamics of the body, and exceeding the recommended power level can lead to dangerous rolling and splashing of the cockpit.
⚠️ Warning: When operating with a motor with a power of more than 5 hp, it is strongly recommended to use a safety cable (fail) for the motor in order to avoid its loss when hitting an obstacle.
For those who prefer silence and the absence of exhaust gases, an excellent option will be the best. electric motorsThey're ideal for quiet fishing in ICE-free areas, and battery weight becomes the major factor in differentiation.
| Motor type | Power (hp) | Speed (km/h) | Fuel consumption |
|---|---|---|---|
| Gasoline 2T | 5.0 | 25-28 | ~1.5 l/h |
| Petrol 4T | 6.0 | 26-29 | ~1.2 l/h |
| Electric motor | 0.5 kW | 6-8 | Depends on the AKB. |
Assembly and descent preparation
Assembly process Azimuth Typhoon 350 It doesn't require any special tools, but it requires a sequence of actions, so the first thing you need to do is to spread the boat on a flat surface, cleared of sharp objects, and this will avoid accidental punctures during the pumping phase.
☑️ Checklist for boat assembly
The cylinders should be pumped in stages, alternating the sides to ensure an even distribution of pressure. gauge necessarily, since the balloon pumped in the sun can burst, and a poorly pumped one will lead to a loss of shape and deterioration of driving qualities.
The installation of floorboards requires care, and the plywood sheets must fit tightly together and be fixed in the slots of cylinders. Properly assembled flooring gives the boat the necessary rigidity, turning the soft shell into a full-fledged vessel. After installation of all components, the leakproofness of the valves shall be checked.
Lubricate the valves with silicone lubrication once a season - this will prevent the mechanism from boiling and ensure tightness even after a long downtime.
Operation and maintenance of the boat
Durability Azimuth Typhoon 350 It depends on how you store and maintain it, and after each operation, you have to thoroughly wash the boat with fresh water, especially if you've been swimming in salt water or in bodies of abundant vegetation, and the mud and sand act as an abrasive, destroying the protective layer of PVC.
Keep the boat in a dry, cool place, protected from direct sunlight. When folded in a wet state, it will quickly become covered with mold, which will destroy the fabric from the inside. protective compoundsIt restores elasticity.
Small damage can be repaired on your own with a remix, which is usually included. For more serious damage, such as seam ruptures or large cuts, it is better to contact a specialized workshop that uses professional welding equipment.
Timely drying and proper storage in the straightened or semi-folded state increase the service life of the boat Azimut Typhoon 350 twice.
Frequently Asked Questions (FAQ)
What is the real speed of the boat Azimut Typhoon 350 with a 5 hp engine?
With one adult and a minimum supply of equipment, the boat goes for planing and develops a speed of about 22-25 km / h. When fully loaded, the speed drops to 15-18 km / h, and the boat goes in displacement mode.
Can this boat be used at sea?
The boat is designed for use on inland water bodies: rivers, lakes and reservoirs, and can only be accessed in calm weather and in close proximity to the shore, as the structure is not designed for high sea wave.
How long does the boat last for active operation?
With care, proper storage and timely repair of minor damage, service life Azimuth Typhoon 350 The key factor is protection from UV light and mechanical damage during transportation.
Do I need to register this boat with GIMS?
Under current regulations, small vessels weighing more than 200 kg in running order or with an engine of more than 8 hp are subject to registration (the figure may vary depending on current legislation, check with the local branch).