Water tourism and fishing require a reliable watercraft that can withstand difficult operating conditions. Boat Azimuth Typhoon For many years, it has been one of the most popular solutions in the Russian inflatable vessel market, not just a inflatable boat, but a complex engineering product that combines accessibility and high functionality, and many aquatic motorists choose this model for its time-tested design and maintainability.
The developers paid special attention to seaworthiness, which makes the Typhoon suitable not only for calm lakes, but also for large reservoirs. PVCThe stainless steel used in the production process is characterized by increased density and resistance to mechanical damage. In this article, we will discuss in detail all the nuances of operation, technical features and possible improvements that will turn the standard model into the ideal boat for your needs.
Structural features and materials of the body
The basis of durability of any inflatable boat is the quality of the material. Azimuth Typhoon Multilayer reinforced PVC is used, which ensures tightness and strength. Five-layer structure The tissue protects against puncture and abrasion, which is critical when used frequently on rocky shores or in algae-covered water bodies, and the seams are made by hot gluing, which eliminates leakage even in severe excitement.
The design of the bottom deserves special attention. Depending on the modification, either an inflatable floor can be used here. NDMAIt's either a hard plywood or aluminum floorboard, and the inflatable floor creates a comfortable cushion, but requires careful pressure control, and hard floorboard provides better course stability at high speeds.
⚠️ Warning: When using a hard-floorboard boat, be sure to check the condition of the stringers. Any deformation of the connecting elements can damage the cylinders during pumping.
To protect against ultraviolet light and temperature changes, the material is processed with special compositions. Azimuth Typhoon boat maintain elasticity even in harsh climatic conditions.
Keep the boat in a dry, ventilated room, avoiding direct sunlight on inflated cylinders to prevent the “lens effect” and the material overheating.
Technical specifications of various modifications
The Typhoon range covers a wide range of needs, from single cruising options to serious multi-seat catamarans. Load capacity The smaller models are great for fishing alone, while the larger versions allow you to take on board equipment for a multi-day hike.
Below is a comparative table of the main specifications of popular modifications to make it easier for you to navigate in the selection:
| Model | Length (m) | Width (m) | Load capacity (kg) | Recommended motor (hp) |
|---|---|---|---|---|
| Typhoon 240 | 2.40 | 1.16 | 220 | 2-4 |
| Typhoon 280 | 2.80 | 1.26 | 320 | 4-6 |
| Typhoon 320 | 3.20 | 1.42 | 450 | 8-10 |
| Typhoon 360 | 3.60 | 1.55 | 600 | 15-18 |
Choosing an engine is not just a matter of power, it's also a matter of balancing the boat. compact Always consider the power limit specified in the product passport. For models of the 320 series and above, the installation of electric motors is relevant, which makes the boat noiseless and environmentally friendly.
Ergonomics and interior equipment
The comfort of the water is made up of little things. Azimuth Typhoon The seats (banks) are usually made of moisture-resistant plywood with soft linings, and their location allows for comfortable accommodation for both rowers and passengers without disturbing the centering of the vessel.
Along the sides are often located linear cables, which can be held on board or in the case of overkill. Carrier handles They are made of durable material and are firmly pasted in cylinders, they withstand considerable loads, which facilitates the transportation of the boat to and from the water. In the bow, there is often an anchor rum, which allows you to quickly attach anchor or falin.
- 🎣 Convenient rod mounts allow you to keep tackles on hand during trolling or parking.
- 🛡️ Protective linings on cylinders prevent PVC rubbing on the side when moving.
- 💧 Self-delivering valves (in some versions) automatically remove water that has got inside without requiring human intervention.
An important element of ergonomics is the ability to install an awning or a running bridge, and although they may not be included in the standard, the design of the boat makes it easy to integrate. tent-transformerThis makes an open boat a cozy cabin that protects against rain and insects, which is especially valuable when sleeping on the water.
Assembly, pumping and descent preparation
Proper assembly is the key to safe operation. Before first use, you need to carefully study the instructions. The process begins with the layout of the boat on a flat surface cleared of sharp objects. Pumping is done sequentially, first to a partial volume, then to full working pressure.
☑️ Checklist before getting on the water
For pumping, it is best to use a foot or electric pump with a pressure gauge. Working pressure It is usually 0.2 atmospheres, but the exact values are always indicated on the valves. Pumping cylinders in hot weather is unacceptable, because when heated in the sun, the air expands, and the pressure inside can exceed critical values, which will lead to rupture of the seams.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight unattended, use sunscreen awnings or blow some of the air when heated.
After the pump, make sure to check the leaks of all the compounds. Soap solution will help to identify microscopic leaks that are not noticeable by ear. Pay special attention to the connection of the cylinders with the translucent and bottom. If you use a boat Azimuth Typhoon First, let her stand pumped for a few hours to check.
The secret to fast assembly
If you often assemble a boat, don't roll it up tight every time, leave it half-assembled in a case, if storage allows, saving up to 30 percent of the time you have to prepare.
Water operation and management
Boat management requires certain skills, especially in the presence of wind or current. Course stability The typhoon is high, but on the wave, a long inflatable boat can behave like a float. Proper loading and weight distribution of passengers are critical. Heavy things should be placed closer to the center and to the bottom to lower the center of gravity.
When driving on the motor, it is important to keep an eye on the angle of the trim, too upturned nose will lead to yaw and slowing down, too down will lead to splashing of the cockpit with water, adjusting the position of the engine on the transom and moving passengers allows you to find the optimal balance. planing It is faster if the boat is not overloaded.
- 🌊 On the wave, try to walk at a 45 degree angle to the crest of the wave to soften the shocks.
- ⚓ When stopping on the current, always stand up against the current or use an anchor.
- 🚫 Avoid sharp turns at high speed, this can lead to passengers flying overboard.
Fishing often requires quiet movement, in which case the use of oars or an electric motor is preferable to a gasoline engine. Azimuth Typhoon It has good inertia, which allows you to travel short distances without constant rowing, and maneuverability on oars is quite high due to the round shape of the nose.
Tuning and improvement DIY
Factory trim is good, but experienced water-engineers often look to improve their vessels. Tuning Azimuth Typhoon One of the most useful additions is the installation of transom wheels, which allow one person to easily move a motorboat along the shore without getting dirty or straining his back.
Another popular trend is to improve storage, with additional pockets, sonar mounts and GPS navigation making fishing more comfortable, so you can make soft cans or replace regular plywood seats with more ergonomic backrests. Installation of insurance lears inside the cockpit It significantly improves safety when driving in a storm.
Competent tuning should not violate the integrity of the cylinders. All additional elements are attached to glue or standard slings, avoiding punctures of the body.
For night fishing enthusiasts, LED lighting is essential, and the tape can be mounted around the perimeter of the cockpit with battery power, which is not only convenient, but also makes the boat visible to other vessels at night, and many owners change their regular valves to more modern and reliable ones if the need arises.
Care, conservation and repair
The long life of the boat depends on proper maintenance after each foray into the water. Azimuth Typhoon Drying must be done in the shade, in the straightened state, and the packaging of a damp boat is guaranteed to produce mold and an unpleasant odor that is difficult to remove.
Keep the boat in a warm room at a temperature of at least -5 ° C, although the material is designed for lower temperatures. Sharp temperature changes are harmful to adhesive seams. Periodically, once a season, it is recommended to glue the outgoing areas and check the pressure in the compartments. Small punctures are easy to fix with a remix that should always be with you.
⚠️ Note: Do not use aggressive chemicals, gasoline or solvents to clean PVC. Use only special products or soap solution to avoid damaging the protective layer of the material.
If you find serious damage that cannot be repaired in the field, you should contact a specialized service. Self-repair of large tears can not withstand pressure on the water. Regular lubrication of valves with silicone lubrication will ensure their smooth operation and tightness for many years.
Can I use the Azimuth Typhoon boat in winter?
PVC boats are possible in winter, but they need caution: the material becomes tougher in the cold and more vulnerable to impacts; you need to use special frost-resistant lubricants and avoid contact with sharp edges of ice; you can't keep the frozen boat warm at once, you need a period of adaptation.
Which glue is best for repair?
For PVC boat repairs, two-component polyurethane adhesives are best used; they provide a flexible and durable seam that is not afraid of water and temperature changes; solvent-based adhesives (such as "Moment") provide a less reliable result for loaded seams.
How often should I check the pressure in the cylinders?
Pressure is recommended to be checked before each outing, and during operation, especially when the ambient temperature changes, the pressure may fall or rise, and a slight decrease in pressure after a night's parking is considered normal, which must be compensated by pumping.
Will the boat withstand the encounter with the snags?
Materials Azimuth Typhoon It's strong enough to withstand light twigs and small sticks, but sharp buckets and snags underwater pose a real puncture risk, and in encumbered areas, it's recommended to use cylinder protective casings or be extremely careful.