Choosing a reliable boat for fishing or resting on the water often becomes a challenge for a boater. bakaiThe PVC, which has earned attention for its affordability and time-tested design, is a classic rowing boat made of polyvinyl chloride, which is ideal for calm bodies of water such as lakes, ponds and small rivers.
Many owners value this model for its ease of maintenance and the ability to quickly build. However, to determine whether this option is right for you, you need to study in detail. specification In this article, we'll look at all the nuances, from the fabrication material to the actual load capacity.
It is worth noting that Maximum load capacity of the model is 350 kgThis is an important indicator for the inflatable rowing boat class, which allows you to take not only one or two fishermen on board, but also the necessary equipment for a full fishing, and understanding these numbers will help you avoid overload and ensure safety on the water.
Design features and materials
The basis of durability of any inflatable vessel is the quality of the material used. PVC This material is a multi-layer structure where there is a grid of synthetic threads between the layers of plastic, which provides tensile strength.
Seams in the design can be performed in different ways, but the most reliable is the method of gluing overlapping or using tapes. Two-layer material It provides excellent resistance to puncture and abrasion on the bottom. When choosing, you should pay attention to the density of the tissue, which usually varies between 750-850 g / sq.m for budget models.
The secret to the longevity of seams
High-quality gluing of the seams is done at a certain temperature and pressure, which turns the joint into a monolith. Check the seams for air bubbles or detachments when buying.
It is important to consider that the material requires careful treatment at low temperatures. Although PVC retains elasticity, the risk of damage to the board when assembled in the cold increases. Reinforced fabric not afraid of ultraviolet light and salt water, which makes the boat versatile for different operating conditions.
After each fishing, be sure to rinse the boat with fresh water, especially if you have swam on a salty pond or in overgrown mud areas.
Dimensions and weightings
The overall dimensions are a key factor when choosing a boat, especially if you plan to transport it in the trunk of a passenger car. The standard length of the model is about 300 cm and the width is 130 cm.
Weight assembled is another important parameter that is often overlooked: depending on the configuration, the weight of the boat can vary from 28 to 35 kg. This is a fairly easy figure, allowing you to carry a boat assembled to one person, although in a disassembled form, transportation in a bag is even easier.
- 📏 Length: 300 cm (standard modification)
- 📏 Maximum width: 130 cm
- ⚖️ Package weight: from 28 kg
- 💨 Diameter of cylinders: 36 cm
The diameter of the cylinders directly affects the loading capacity And stability. The larger the diameter, the higher the side, and the more water the boat can displace, but the bigger cylinders increase sailing and weight, which can be critical when rowing.
Capacity and passenger capacity
The issue of water safety is always the first one, and the manufacturer's stated carrying capacity of 350 kg is the theoretical maximum at which the boat is still afloat. workloadThis is usually 20-30% less than the limit.
Passenger capacity is officially declared as two people, which means that you can accommodate two adults of average build with a minimum set of gear, and if you plan to bring a lot of equipment, a dog or children, you need to adjust for your total weight.
⚠️ Warning: Never exceed the maximum load capacity specified in the product's passport. An overloaded boat becomes unstable, has a low side above the water and is prone to flooding with a wave, which can lead to a tipping over.
The distribution of cargo is also important. Heavy items such as anchor, battery (if electric motor is installed) or catch boxes should be placed closer to the vehicle. diameter And evenly along the sides, which helps to keep the balance and avoid rolling.
Bottom system and gender rigidity
The design of the bottom determines the comfort of being in the boat and the possibility of installing additional elements. In the Bakai model, the most common is a low-pressure inflatable floor (LDPB) or hard plywood flooring. technical advantages and flaws.
The inflatable floor provides excellent buoyancy and softness, which is especially pleasing for long fishing, and allows the boat to better skirt rough terrain when pulling ashore, but it is harder to stand on such a bottom because the surface remains flexible.
The hard flooring of water-resistant plywood, covered with a mat, creates a flat area, and on this bottom you can stand confidently, which is important for active spinning fishing or installation. sonar In addition, the hard bottom gives the body additional rigidity (kieling), improving driving performance.