Finding a reliable and affordable fishing or cruising boat often leads fishermen to think: you need a boat Bars 260, which can be bought in specialized stores or from private individuals. This model has been a workhorse on the waters of Russia for many years, combining simplicity of design and durability of metal. Many beginners and experienced water engines consider this option as a starting point in the world of motor boats.
Aluminum hulls are valued for their indestructibility and ability to hold a blow to the side or snag, which is not always possible PVC. However, before you make a purchase, it is worth understanding the nuances of modifications and the real condition of the vessel, especially if you are looking at the secondary market. In this article, we will discuss in detail what to look for when choosing a Barc 260.
Features of the construction of the body and driving qualities
The base of the boat is aluminum-alloyIt's a very corrosion-resistant hull, and it's designed like a flat-bottom, with a little bit of bend, which is very stable in the parking lot, and it's critical for fishing, when you need to anchor and throw your gear safely without fear of sharp rolls.
Due to the light weight, which usually does not exceed 50-60 kg, the boat is easy to transport on the roof of a passenger car or even in the trunk of a large station wagon. Modifications of Bars 260 They often don't have a complex keel shape, which makes it easier to go sleeve even with low-power engines. However, it's worth remembering that at a high wave, a flat-bottomed boat will be tangibly nose-beating, so long walks through open water on it require caution.
To improve driving performance on the wave, many owners install homemade zygomatic pads or transom plates, which helps to slightly smooth out the impacts on the water.
An important element is the rigidity of the structure, which is achieved by a system of frames and longitudinal stringers. Unlike inflatable analogues, there is no risk of puncture on a sharp stone or hook. Aluminum case It also allows you to install additional elements such as runducts, sonar mounts or rod holders, without the risk of damaging inflatable tubes.
⚠️ Attention! When buying a used boat, carefully examine the bottom for dents and cracks. Aluminum has the property of "tiring" and cracking in places of severe deformations, especially on welds.
Comparison of modifications: M, NM and other versions
There are several variants of this model on the market, and understanding the difference between them will help you make the right choice. M and NMThey have design differences that affect comfort and functionality.
Modifications Bars-260M It's usually equipped with built-in transmutation plates and reinforced transmolators, which allows you to put more power motors. NM The nose is often changed to better cut the wave, although for a length of 2.6 meters this effect is minimal. It is also worth paying attention to the presence of slates: in the basic versions, the floor can be simply grooved, and in improved versions, it can be closed with removable wooden or aluminum sheets.
When choosing between a new boat from the factory and a used one, consider that older models may have thicker metal but less comfort. Newer versions often come with plastic haunches and more ergonomic seats. The factory warranty for aluminum housing is usually 1 to 3 years, depending on the manufacturer.
- 🛶 Basic version: Minimum weight, simple seat-bank, no deck.
- ⚓ Version M: reinforced transom, the ability to install the engine up to 5 hp, the presence of sleighs.
- 🌊 Version NM: altered geometry of the nose, improved germination on the wave.
- 🔧 Tuning: presence of a lumber, keys, anchor dim and painting.
Technical specifications and load capacity
Understanding the numbers is essential for safe operation. The Bars 260 is a small boat, but its size is limited. Below is a table with the main parameters that will help you match the capabilities of the boat with your needs.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 2600 mm | Dimension for transport |
| Body width | 1200 mm | The internal width is smaller |
| Height of board | 400 mm | Excluding the timber |
| Load capacity | 200 kg | Including passengers and motor |
| Engine power | up to 5 hp | Recommended traction |
Specified loading capacity The 200kg means that a single adult fisherman with a small supply of gear and a light motor can comfortably be accommodated in the boat, and the attempt to load two adult men and a heavy anchor will lead to a critical decrease in the height of the board above the water, which is dangerous on the wave. Passport capacity The motor is also an important limiter, exceeding which can lead to the destruction of the transom.
Effect of motor weight on the different
A heavy motor on a short transom can cause the bow to be jacked up, which impairs visibility and handling.
A 40 cm height is not much for open water, but it is quite enough for calm lakes and rivers. It is worth considering that the real buoyancy reserve depends on the condition of the hull and the absence of holes. Displacement The boat allows it to stay afloat even when partially filled with water, but this does not negate the need for life jackets.
Where to buy: factory, dealer or used market
The decision on where to buy the Bars 260 depends on your budget and your willingness to engage in restoration. Buying a new boat from an official dealer ensures that there are no hidden defects and a complete set of documents for registration with the GIMS, if it is required for your modification.
The secondary market offers lower prices but requires careful inspection. Often you will find boats that have been used to transport goods or that have been outdoors. Aluminum oxidizes but does not rust as quickly as steel, but exposure to sun and water can weaken the welds if not properly maintained.
☑️ Checking the used boat before buying
When buying from hand, be sure to check the availability technical data sheetWithout paperwork, it will be impossible to register a boat or legally use it with a motor, and factory boats often have a number stamp on the transom or in the bow, which must match the documents.
⚠️ Attention! Avoid buying boats with welded holes. The quality of artisanal aluminum welding in garage conditions often leaves much to be desired and may not withstand the load on the water.
GIMS registration and legal aspects
The issue of registration Bars 260 is often controversial. According to the current legislation of the Russian Federation, boats weighing more than 200 kg or with an engine power of more than 8 hp (10.88 kW) are subject to registration. Since Bars 260 is lighter than 200 kg and is designed for an engine up to 5 hp, formally it may not require registration.
However, if you plan to install a motor that is more powerful than your passport or modify the boat to increase its weight, the requirements may change. boat-port Or a check-in contract that proves the boat's origin, which will help avoid problems with the water inspector's background check.
For a motorized boat up to 10 hp (inclusive), the right to operate a small craft of category M (motor boat) is not required if the vessel is not subject to registration, but knowledge of the rules of conduct on the water and the presence of a life jacket is a mandatory safety requirement for all.
Bar 260 with an engine up to 5 hp and a total weight of up to 200 kg does not require mandatory registration in the GIMS, but the documents for the boat and the engine must be available.
Tips for the operation and care of aluminum
An aluminum boat requires minimal but regular maintenance, and after every fishing trip, especially in salt water, it is advisable to rinse the hull with fresh water, which will wash away salt and dirt, which can speed up the corrosion process, especially in the attachment areas of the fittings.
Keep the boat upside down under a canopy or in a garage. Direct sunlight is not terrible for metal, but can damage wooden elements (if there are sleighs) and rubber seals. Transportation on the trailer shall be carried out using soft pads under the keel and side to eliminate vibration friction.
- 🧼 Wash: Use a soft sponge and neutral detergents.
- 🔩 Furniture: once a season, check the tightening of bolts and nuts, lubricate the threaded connections.
- 🎨 Painting: If there are chips, use special soils for aluminum and epoxy paints.
- ❄️ Winter: Keep the boat in a dry place raised above the ground on the stands.
If you notice white plaque (oxide), it can be neatly removed with a metal polish paste. Do not use abrasive brushes that can scratch the protective oxide layer. Proper care will allow the Bars 260 to last for decades, maintaining its performance.
Frequently Asked Questions (FAQ)
Can I install a 6 hp engine on the Bars 260?
Technically, it can be determined, but it is an excess of passport power, which can lead to the destruction of the transom, loss of warranty (if the boat is new), and problems with the GIMS during inspection.
Do I need to register the Bars 260 boat with GIMS?
If the total weight of the boat (hull + equipment + engine) does not exceed 200 kg and the engine power up to 10 hp, registration is not required. Barc 260 usually fits into these parameters.
What is the maximum speed to be reached on the 260 Barça?
With a 5 hp engine and one passenger, the speed is usually about 20-25 km / h. The boat comes out with one person weighing up to 80 kg.
What is the difference between the Bars 260 and PVC boats?
The main difference is the material: aluminum is stronger to puncture, durable, but heavier and harder to move, PVC is easier to transport when disassembled, and it is softer on the wave, but is afraid of sharp objects.