Choosing a boat for fishing or a family holiday on the water is always a compromise between price, size and functionality. Best 390 The company's Russian company, Frigate, occupies a special niche, causing a keen interest in water engines, many potential buyers are looking for information about how this hybrid behaves on the wave, and how justified the combination of an inflatable cylinder and an aluminum case in real conditions.
Analysis of user opinions shows that Best 390 Often seen as an alternative to classic PVC boats or small boats, owners appreciate the ability to transport a passenger car in the trunk if you can disassemble the deck, but like any technology, this model has its own features that are not always written about in advertising booklets, and we collected and systematized the data so that you can form an objective opinion.
It is important to understand that the boat is a complex structure where soft elements interact with hard ones. Reviews often focus on the quality of docking, stability on water and durability of materials. Below we will discuss in detail the key aspects that should be considered before buying, based on the statistics of visits to service centers and forums for water lovers.
Design features and build quality
One of the main specifications of the model is its hybrid design. aluminum-magnesium alloyinflatable tubes attached to the sides are not only for buoyancy, but also for protection against impacts. Owners note that the quality of welding seams is usually high, but there are also isolated cases of defects that require attention during acceptance.
The fabric used for cylinders is usually a five-layer high-density PVC. reinforcedIt's a very good shape and pressure, and users praise the density of the fabric for its resistance to cuts on reeds or snags, which is often the case when you land on unequipped shores. However, some people note that the fabric can get warmer in the sun than the fully inflatable ones because of the proximity of the metal.
⚠️ Warning: When inspecting a new boat, be sure to check the quality of the stringer sticking to the bottom. In rare cases, there are detachments that are better eliminated for warranty than repaired yourself after the season.
The deck is assembled using a system of slots and locks, which allows you to quickly assemble and disassemble the structure, but requires a certain skill. Best 390 It has a collapsible floor, which is critical for transportation, and many owners recommend lubricating locks with silicone lubrication before the start of the season to avoid jamming and creaking during operation.
Driving qualities and behavior on the water
On the water, the boat has proven to be a stable and predictable vessel, thanks to its V-shaped bottom and rigid hull. Best 390 It's a very good course holder and less rolling than fully inflatable boats. Owners often say "dry run" - the spray does not cover the cockpit even when moving against the wave, which is especially appreciated by fishermen who spend a lot of time in the boat.
The controllability of the model depends on the installed engine and its location. The optimal is the use of engines with a capacity of 10 to 20 hp. gellingHowever, it is worth considering that an empty boat can be more sensitive to wind gusts due to the high sailing capacity of inflatable tubes.
Impact of loading on speed
When fully loaded (3-4 people + gear), the planing speed can drop by 5-7 km / h, and fuel consumption will increase by about 15-20%.
Noise is another aspect that users often discuss: the aluminum bottom can resonate, creating noise from waves or motor operation. To minimize this effect, many owners use special mats or additional pads for sleighs, which makes staying in the boat more comfortable, especially on long journeys.
Compatibility with motors and attachments
transom plate Best 390 Most owners agree that the "gold mean" is two-stroke or four-stroke engines with a capacity of 15 hp, which provide sufficient traction to go to the plane with full load and are economical in fuel consumption. More powerful engines (20-25 hp) are also acceptable, but require caution when maneuvering.
An important element is the tanning plate, which is made of durable material and reinforced with linings. When installing the motor, you must carefully monitor the angle of inclination of the lower unit. Incorrect adjustment can lead to " yaw" boats or difficult to enter planing mode. Some users install hydraulic lifts to facilitate control.
To prolong the life of the transom, use a water-resistant lubricant for the motor fasteners, which will prevent metal from boiling and corrosion in salt or fresh water.
As for attachments, the design of the boat allows you to install various accessories: sonar, rod holders, anchor systems. Hard boards allow you to attach elements directly to the hull without fear of damaging the cylinders. Best 390 It is an excellent platform for customization for specific fishing tasks.
Transportability and ease of storage
One of the key factors in choosing this model is that it can be transported in disassembled form. Best 390 The weight is distributed among the cylinders, deck and seats, allowing components to be brought into the apartment or loaded into the trunk of a mid-range sedan.
The assembly and disassembly process takes an average of 20-30 minutes with experience. Beginners may take longer, especially in the field. For ease of storage, it is recommended to have covers for all components to protect them from dust and mechanical damage in the garage or on the balcony.
☑️ Preparation for winter storage
It's worth noting that during the cold season, PVC fabric becomes more rigid, and the assembly process can become more complicated. Keeping a boat at room temperature makes it much easier to prepare for the season. If you plan to keep the boat in an unheated room, let it warm up before assembly.
Comparison with peers and competitors
There are many models on the market, and Best 390 It's often compared to Cayman, Flagman or Aquaman, and Bester's main advantage is that it's hard aluminum flooring, which gives you a sense of safety and stability comparable to a boat, and inflatable paiola floors often lose out in the comfort of cruising on the bottom.
On the other hand, all-metal boats (e.g., Kazanka or Wind) benefit in hull durability, but lose in weight and dimensions when transported. Best 390 It's a niche between the two worlds, offering a compromise solution, and for those who don't have a trailer or a boat garage, it's often the best option.
| Parameter | Best 390 | Fully inflatable NDNDM | Metal boat |
|---|---|---|---|
| Weight gathered | ~85-95 kg | ~60-70 kg | ~150+ kg |
| Transportation | Car trunk | Car trunk | Just the trailer. |
| Sustainable | High. | Medium | Very high. |
| Price. | Medium | Low/Medium | High. |
The 390 best is the perfect choice for those who want to experience the experience of driving a boat, but are limited by storage and transportation conditions.
Typical problems and ways to solve them
Despite the reliability, owners face a number of typical problems, one of which is the appearance of creaks in the junctions of aluminum profiles, this problem is solved by laying additional seals or using Teflon lubricants, and it is also worth monitoring the pressure in the cylinders, especially when the air temperature changes.
Corrosion of aluminum cells is another potential risk, especially when used in salt water. Regular freshwater washing after each exit significantly prolongs the life of the case.
⚠️ Warning: Do not leave the boat with full pumping of cylinders in direct sunlight for a long time.
Wear at the junction of the fabric with the metal is a rare but possible problem. For prevention, it is recommended (regularly check) the condition of the tissue in the areas of contact with aluminum profiles and, if necessary, glue protective tapes.
Outcome recommendations and conclusions
In summary, we can say that the boat Best 390 It's a serious watercraft for those who value comfort and versatility, and it's not without the disadvantages of hybrid designs, but its advantages of hard drive and compact storage outweigh the disadvantages for most users, and it's a choice for quality and functionality.
If you are looking for a boat for frequent trips to large bodies of water, where speed and safety are important, and you do not want to depend on the availability of a trailer, then this model deserves your attention.
Where can I buy parts?
Original remixes and spare parts are better to order from official dealers or at the manufacturer, since the geometry of the profiles may differ in different batches.
Frequently Asked Questions (FAQ)
What is the maximum weight of the cargo that can withstand the Bester 390?
Passenger load capacity is usually around 600-700 kg, including the weight of people, motor and equipment. However, for comfortable planing, it is recommended not to exceed 400-450 kg.
Is it possible to use a boat in winter?
Use is possible, but requires caution. PVC loses elasticity in the cold, so it is better to assemble in a warm room, and in the cold to avoid sharp bumps and bends.
Do I need to register a boat with GIMS?
Yes, if the weight of the curbed vessel with the engine exceeds 200 kg or the engine power is more than 8 hp (or 10 hp depending on the year of production and current regulations), the best 390 with the engine is often registered.
What pressure should be in the cylinders?
The working pressure is usually 0.2-0.25 atm (200-250 mbar). Excess pressure is dangerous, especially in hot weather. Use a pressure gauge for control.