The choice of the first swimmer is always accompanied by doubts, especially when the budget is limited and reliability requirements are high. Chirook 270 The Russian manufacturer has proven to be one of the most affordable options for getting out on calm water, and many beginners consider this size, as it allows you to accommodate one person with a full set of equipment or two passengers in economical mode.
However, the low price often raises questions about the quality of the materials used and the durability of the seams. Boat Chirok 270 It is made of reinforced polyvinyl chloride, which is resistant to gasoline, oils and ultraviolet light, but has its limits of strength when used in rocky water bodies. It is important to understand that this model belongs to the class of rowing vessels, although it allows the installation of a low-power outboard motor, which expands its scope.
In this article, we will analyze in detail the design features, anonymize real reviews of fishermen and hunters, and also consider the nuances of tuning, which will turn a simple “inflater” into a comfortable tool for fishing. The maximum load capacity of 220 kg is a theoretical limit, not a working recommendation.How to prepare the boat for the first season.
Structural features and materials of the body
The basis of reliability of any inflatable vessel is the material from which it is made. Chirook 270 It's not a conventional film, it's a complex composite fabric, where a reinforcement mesh is soldered between the layers of the polymer, providing high tensile strength, and the material's density is usually between 750 and 850 g/sq.m., which is the standard for the budget segment.
The design of the bottom is made by technology Flat Floor This means that there is no high-pressure inflatable floor (HPDF) but rather a rigid plywood or aluminum flooring, which consists of two or three sections, which reduces the cost of the product significantly, but imposes restrictions on speed and comfort when turbulent, and the boards are cylindrical in shape, which makes assembly easier, but makes the boat more susceptible to lateral wind.
Welding technology
The seams in the Chiroc boats are made by hot welding, overlapping the layers, creating a monolithic bond that is stronger than the material itself, but unlike expensive ones, it often uses a single seam, which requires more care in storage and transportation.
Special attention should be paid to the inflating system. flap-valveThe nose is equipped with a handy handle for carrying and a rim for anchoring, all seams are glued and additionally protected by spray pickers, although the quality of the factory slug sometimes requires testing before first descent into the water.
Dimension, weight and load capacity
When choosing a boat, it is critically important to correlate its size with the conditions of transportation and the number of crew. Chirook 270 It is a small boat with a length of less than 2.7 meters, which makes it easy to place a packed vessel in the trunk of a passenger car or even in a large backpack, making it popular with fishermen-pedestrians.
The weight of the kit is one of the key advantages: when disassembled, along with oars, seats and a pump, the weight rarely exceeds 20-22 kg. This allows you to carry the boat to one person over short distances, although it is still recommended to use a trolley or partner assistance for comfortable transportation over long distances. Working capacity It is about 180-200 kg, which formally allows you to take on board two adults, but the most comfortable here feels one fisherman with a solid supply of gear.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 270 cm | Dimension inflated condition |
| Full width | 125 cm | Resilience on water |
| Diameter of the cylinder | 34 cm | Boat height above water |
| Weight of kit | ~21 kg | No motor or anchor. |
| Load capacity | 220 kg | Maximum permissible |
It is important to note that the manufacturer's stated specifications are often extreme. In practice, when fully loaded at 200 kg, the sides are heavily submerged in water, and the buoyancy margin becomes minimal. Safe operation It is expected to load no more than 70-80% of the maximum, especially if you plan to go out into open water or current.
Outboard operation
Although Chirook 270 Positioned as a rowing boat, the presence of a rigid transan allows you to install outboard motors. Engine power should not exceed 3-3.5 hp Exceeding this limit is fraught with the destruction of the transan or loss of controllability by the boat. The optimal choice will be light two-stroke engines of Chinese or Russian production, such as: Hangkai, Yamaha 2CMHS Or their analogues.
When installing the motor, you need to carefully monitor the centering. Because of the short length of the hull, moving the engine too far back can cause the bow of the boat to stall and the transom to go underwater. In this case, you need a remote suspension for the load or move the passenger closer to the nose. The speed for an outboard motor is about 10-12 km / h, which is enough to move between fishing points.
When installing the engine on the Chirok 270, be sure to use a safety tile tied to the rot on the nose. This will save the boat from going into sunset if the motor suddenly breaks off the transom due to vibration or impact on an obstacle.
It's worth noting that the boat is planing, and it's almost impossible to go plane with a single person and a 3 hp engine because of the flat bottom and the high drag. It's moving in a displacement mode, creating a noticeable wave. motor-holding should be maximum: use rubber pads and regularly check the puff.
Comfort and ergonomics for fishing
Fishing is a process that requires time and convenience. Chirook 270 It is equipped with two inflatable or rigid seats (banks), which are attached to the sides through special pockets or fasteners. Hard seats made of water-resistant plywood are preferable, since they provide a more stable landing and do not get dented under the weight of the angler.
To improve comfort, many owners immediately consider upgrading, standard oars that come with a complete set are often aluminum and quite heavy, replacing them with light carbon fiber or wooden counterparts significantly reduces fatigue when rowing. rod-holder And it was a platform for sonar, turning the boat into a full-fledged fishing boat.
- 🎣 Installation of the anchor ring on the nose and stern allows you to quickly fix the boat on the point, not tied to the handles, which is especially important in the wind.
- 🎒 Installation of bags under the cans makes it possible to store gear, spare clothes and a thermos in dryness and close proximity.
- ⚓ Transpranse refinement additional plywood linings increase the rigidity of the motor attachment and protects PVC from grinding.
Despite being compact, the boat has plenty of room to place a box with gear between the legs or behind the back, but it is worth remembering that any additional equipment increases the overall weight, so the choice of accessories should be approached rationally, avoiding overload.
Tuning and improvement DIY
Factory performance often leaves much to be desired in terms of ergonomics, so tuning Chiroka 270 One of the most popular improvements is to replace the standard flooring, the plywood used by the manufacturer can swell from moisture, so it is often replaced with FC aviation plywood or laminated plywood coated with varnish in several layers.
Another important aspect is bottom protection: flat bottom without keel tape quickly wears off against sand and rocks when pulled ashore. timber And the perimeter will extend the life of the hull, and many people will also install an inflatable keel balloon, which, while it won't turn the boat into a speedboat, will improve the stability of the course.
☑️ Checklist of the first tuning
Storage is great for sealants that can be fastened to the nose or stern. reflector The boat will be visible to other vessels in poor visibility or fog, and all improvements must be made using special adhesives for PVC, such as polyurethane two-component compounds.
Care, storage and repair
Durability of the boat Chirook 270 After every fishing trip, especially in salt water or in water with blooming water, the vessel must be thoroughly rinsed with fresh water, and the remaining dirt and organics can begin to destroy the top layer of PVC or provoke mold during storage.
Drying is a critical step. You can't fold a wet boat, because it will rot the reinforcement layer and cause an unpleasant smell, and you need to dry in the shade, because direct sunlight on pumped cylinders can cause thermal expansion of air and even rupture of seams. Optimal pressure in the cylinders during storage should be reduced.
⚠️ Attention: Never keep the boat near heating appliances, open fire sources or under direct sunlight when assembled. High temperatures cause air to expand inside the chambers, which can cause seams to rupture or deform the material.
In the case of a puncture or cut, repairs do not require complex equipment, such as a remix that is included in the supply or a piece of similar material, the surface is cleaned, degreased and glued with special glue, it is important to allow the glue to be fully polymerized (usually 24 hours) before re-inflating, and regular inspection for microcracks will help avoid trouble on the water.
Proper drying and storage in straightened form at room temperature is a guarantee that the boat Chirok 270 will last you 5-7 years without losing leakage.
Comparison with competitors and final conclusions
There are many analogues on the market, such as Flagship, hunter or brigCompared to them. Chirook 270 It's a great asset in price and simplicity, but it can be inferior in hardware and material density, and it's a workhorse for calm water bodies that doesn't claim to be the laurels of a speedboat, but it does its job honestly.
If you want a boat for rare outings on a mud-covered lake, for fishing from the shore or as a backup at a recreational base, this is a great choice. For permanent operation on large reservoirs or rivers with strong currents, it is better to consider larger models with an inflatable floor. Chirook 270 It offers an unrivalled ratio of price and functionality.
In conclusion, this boat is a great start in the world of boating technology, it forgives many mistakes of beginners, is easy to repair and does not require much maintenance, and with care and timely care, it will be a reliable assistant for many years to come.
Can I put a motor more powerful than 3 hp on the boat Cherok 270?
Technically, it's possible, but it's dangerous. The Tran can't withstand vibrations and weight, and the boat itself will become unstable. The manufacturer doesn't recommend overpower, because it removes the warranty and puts life at risk.
How long does the boat dry after fishing?
In sunny and windy weather, 30-40 minutes are enough. In cloudy weather, the process can take 1-2 hours. It is important that not only the outer surfaces, but also the inner surfaces (between the banks and the bottom) dry out.
How to repair a puncture in the field?
For emergency repairs, you can use a special adhesive tape for PVC (included in the remix), full repair with patch and glue is better done at home, as it takes time to dry and no dust.
Can the Chiroc survive 270 adult men?
Formally, the payload is fine, but the boat will be very low above the water, and any wave or sudden movement can lead to water scooping, and it's comfortable and safe for one person to be on it.
Which glue is best for PVC repair?
It is optimal to use two-component polyurethane adhesives (e.g. 900E or analogues) that create an elastic and water-resistant seam, chloroprene-based adhesives (contact adhesives) are less durable and fear of heating.