Boat. Moving 26 ND It is one of the most popular models among outdoors, fishing and alloying enthusiasts, and combines strength, maneuverability and affordable price to make it an ideal choice for beginners and experienced water-engineers alike. Moving 26 ND adapted for use on fast-flowing rivers, including rafting on mountain rivers and high-speed areas.
But before you buy or make the first alloy, it's important to understand the technical details of what kind of motor is right for this model, how to distribute the load correctly, and what safety measures to follow on the water. boat-like, features of its operation on alloy, and also give practical tips on tuning and repair. Move 26 ND If you already own it, this information will help you avoid typical errors and maximize the potential of the vessel.
Technical specifications of the boat "Dvina 26 ND": what you need to know before buying
Boat. Moving 26 ND It is a class of inflatable floor vessels with a rigid aluminum hull, and its dimensions and design are optimized for use on inland waters, rivers and even offshore coastal zones (with respect to turbulence restrictions).
- 📏 Length: 260 cm (compact for transportation, but roomy for 2-3 people).
- 🚤 Width: 135 cm (provides stability on water).
- 🔧 Shell material: aluminum
AMG51.5-2 mm thick (resistant to corrosion and mechanical damage). - ⚓ Load capacity: 300 kg (including motor, passengers and equipment)
- ⛽ Recommended engine power: up to 5 hp (maximum permissible - 9.9 hp, but requires registration in GIMS).
The peculiarity of the model is bottom high-pressure 0.25 bar), which adds extra stiffness and improves driving performance. seat-bankBut you have to keep in mind that you have to have a pump, and you have to have a transom wheel. when using a motor more powerful than 5 hp, the boat requires mandatory registration in GIMS as a small vessel.
| Parameter | Meaning | Note |
|---|---|---|
| Boat weight (without motor) | 38-42 kg | Depends on the configuration (for example, the presence of transom wheels). |
| Number of compartments | 3–4 | Sealed compartments increase safety in case of a breach. |
| Maximum speed | 20 km/h | With a 5 hp engine and optimal loading. |
| Recommended number of passengers | 2–3 | With 3 passengers, the load capacity is reduced to 200 kg. |
When choosing a boat, pay attention to the weld-quality Cheap versions can have leakage problems, especially after several seasons of use. Also check the package: the base version is often missing. anchor and safety-linewhich will have to be purchased separately.
Choice of motor for the "Dvina 26 ND": gasoline vs electric motor
One of the key questions in operating a boat is which engine to choose, and it's not just about speed and maneuverability, it's about how you choose. security Let's look at both of these options.
Gasoline engines
The most popular choice for 26 ND - power outboard motors 2.5 to 5 hp. (for example, Honda BF5, Yamaha 5FMHS domestic Wind 5Advantages:
- ⚡ High speed: up to 15-20 km / h at optimal load.
- 🔧 Reliability: Gasoline engines are less demanding to operating conditions.
- 🛢️ Range of navigation: with a full tank (5-6 l) you can overcome up to 50-70 km.
However, there are disadvantages: noise, the need to register at a power of more than 5 hp, and mandatory presence of a fire extinguisher on board (GIMS requirement).
Electric motors
Electric motors (e.g., Minn Kota Endura C2 30 or Haswing Cayman) Suitable for quiet fishing or rafting in ICE-free areas, and their advantages:
- 🔇 Silent: Perfect for fishing for a predator.
- 🌿 Environmental friendliness: No emissions, you can use it on protected waters.
- 📱 Easy to manage: Speed adjustment is smooth, there are models with a remote control.
The main disadvantage is limited-time (from 1 to 5 hours depending on battery capacity) For river rafting over time, this may not be enough.
If you plan to raft on a mountain river, give preference to a gasoline engine with manual control - it will allow you to quickly maneuver on the thresholds.
⚠️ Attention: When installing the engine is more powerful 5 hp boat Moving 26 ND Without a certificate of registration, operation is prohibited and punishable by a fine of up to 2,000 rubles (Article 11.8.1 of the Administrative Code of the Russian Federation).
Preparation of the boat for rafting: checklist and tips
Boat rafting Moving 26 ND It requires careful preparation, especially if the route is a fast-flowing river or rapids.
☑️ Preparation of the boat Dvina 26 ND for rafting
Pay special attention load-sharingOptimal scheme:
- 🎣 Equipment and food: in waterproof bags on the sides.
- ⛽ Fuel: in the center of the boat (for example, under the seat).
- 👨 Passengers: One at the transom (for motor control), the second at the nose (for balancing).
If you are a multi-day rafter, take with you:
- 🔧 Remake: PVC patches, glue Uranus or Crystal moment, pump.
- 📡 Means of communication: radio or phone in a waterproof case.
- 🧭 Navigation: GPS or maps of the area (on the river cellular communication is often absent).
What to do if the boat starts to leak?
If you find a hole, move to the shore immediately. On land: 1) Blow the compartment, 2) Clean and degrease the puncture site, 3) Apply glue and patch, 4) Pump the compartment in 15-20 minutes. In extreme cases, use a repair spray (for example, Flex Seal), but this is a temporary solution.
Features of the alloy on the "Dvina 26 ND": maneuvering and safety
This type of boat is different from a normal walk on a lake. On the river with the current, it is important to consider:
- 🌊 Control at the thresholds: Keep the boat's nose at an angle of 30-45° to the current to avoid tipping over.
- 🚣 Rowing on oars: If the engine stalls, row in synchrony so as not to lose control.
- 🏞️ Route selection: Avoid areas with boulders and “boils” (standing waves).
On mountain rivers (for example, on Katuni or Biye) Moving 26 ND It's good, but it takes experience. It's better for beginners to start with lowland rafting. Oka. or Volga in the upper reaches.
⚠️ Attention: When rafting on the river with a fast current (more than 3 m / s) forbidden Getting up in a boat or moving around the sides abruptly can cause you to lose balance and tip over.
If you're rafting in a group, keep the distance between the boats at least 20-30 meters, which will avoid collisions on turns. signal (For example, a whistle is a danger, a raised hand is a stop.)
On alloys, always keep the motor running, even if you are going with the flow, which will allow you to maneuver quickly in case of danger.
Tuning and modernization: how to improve the "Dvina 26 ND"
The basic equipment of the boat often requires improvements, and here are the most useful improvements:
1. Tranx reinforcement
Standard transom 26 ND It can withstand motors up to 5 hp, but can deform during heavy operation.
- 🛠️ Install. prairie from aluminum 3-4 mm thick.
- 🔩 Add in. tarmac (Spatterning) for load distribution.
Additional accessories
For comfort and safety:
- 🪑 Seats with depreciation (for example, Spinera) for long-term alloys.
- 🔦 LED lighting on the sides (useful for night fishing).
- 🧲 Magnetic holders for tools and gear.
Waterproofing and protection
To extend the service life:
- 🧴 Treat the bottom friction-coated (for example, Innox).
- 🛡️ Put it on. shield-film on board (from scratches during transportation).
When tuning, avoid self-welding It can break the sealing, and it's better to go to specialized workshops.
Maintenance and repair: how to extend the life of the boat
Regular maintenance 26 ND includes:
- After each alloy:
- 🧽 Wash the boat with fresh water (especially if it was in salty or contaminated water).
- 🌬️ Dry in the shade (direct sunlight destroys PVC).
- Once a season:
- 🔧 Check the welds and the sealing of the compartments.
- 🛢️ Lubricate
WD-40metal parts (transe wheels, hinges).
- 🔄 Replace the pump valves (they wear out from constant use).
Typical breakdowns and their elimination:
| Problem. | Reason. | Decision |
|---|---|---|
| Boat's not pumping well. | Wear of the valve or crack in the pump hose | Replace the valve or hose |
| Leak in the bay. | Puncture or PVC dissection | Glue patch Uranus or- |
| The motor "walks" when moving | The transmolant attachment weakened. | Pull up the bolts or install reinforced fasteners |
⚠️ Attention: If the boat is stored in an unheated room in winter, Don't blow it away completely. The optimal pressure for storage: 50-60% of the maximum.
FAQ: answers to frequent questions about the “Dvina 26 ND”
Can I use a 9.9 hp engine on this boat?
Technically yes, but only after that. registration Without registration, the engine is allowed up to 5 hp inclusive.
How many people can a boat hold?
Officially - up to 3 people, but the total weight (including engine and equipment) should not exceed 300 kg. For comfortable alloy recommended 2 people + cargo.
How to transport a boat by car?
Best to use. trailer Or a trunk with crossbars, and you have to put the boat up and sling it up with slings at 4 to 5 points, and you have to take off the transom wheels when you're transporting it.
What is the maximum wave allowed for this boat?
Do 0.5 meters (2 points) In a big wave, the boat becomes uncontrollable due to the low side.
Can I put a tent on the boat for the night?
Yes, but only on the shore, it's dangerous to set up a tent on the water, the boat can lose stability. low-profile (for example, Decathlon Quechua MH100).