The market of inflatable swimming aids is full of offers, but among them confidently stands out The flagship 300NTThis model has long been a benchmark in its size class, offering the optimal balance between weight, load capacity and cost, and many aquatic motorists choose this series for fishing in small rivers and lakes, where maneuverability and stability are required.
abbreviation NT The model name indicates the presence of a transom and an H-paiole, and it's not just a marketing ploy, it's a design that fundamentally changes the behavior of the vessel on the water, and unlike the classic slate variants, here we get a rigidity close to metal counterparts, while maintaining compactness in the folded form.
Choosing. flyboatIt's important to understand that the 300th size is a middle ground for one or two people, big enough to accommodate gear and catch, but still transportable in the trunk of a passenger car, and let's go into detail about what's underneath the brand and why this boat is so popular.
⚠️ Attention: While buying, pay attention to the date of production of PVC material. Despite its high resistance to ultraviolet light, storing the boat in a warehouse for more than 5 years without operation may require additional inspection of the seams before the first descent into the water.
Design features and materials
Basis The flagship 300NT It's a five-layer, high-density reinforced PVC material that's resistant to fuels, salt water and mechanical damage. Tissue density It is 750-900 g / sq.m., which allows you to withstand significant loads without the risk of balloons bloating when heated in the sun.
The system deserves special attention. H-floorboardUnlike solid plywood, it uses separate sheets connected to each other and sides by special slings, which allows the boat to keep its shape even in heavy chop, eliminating the "trough" effect when the bottom sags between the cylinders.
- 🔹 Tranza It is made of moisture-resistant plywood with a thickness of 12-18 mm (depending on the year of production) and is equipped with overlays to protect against friction.
- 🔹 Valves. type "frog" or screws provide tightness and ease of pumping, without requiring complex maintenance.
- 🔹 keel inflated gives the vessel excellent course stability, which is critical when moving against the wind or current.
The manufacturer has also introduced reinforced lining In areas of high friction, such as the beam and bottom of cylinders, this significantly extends the service life of the product with frequent pulling on pebble or sandy shore, the quality of the gluing of the seams is high, as evidenced by the minimum percentage of defect.
Assembly and descent preparation
Assembly process The flagship 300NT It doesn't require any special skills, but it has some nuances that you need to consider for the longevity of the paiola, and the first thing that you do is always inflate the cylinders, but not to the full pressure, but to about 70-80%, so that you can insert the paiola without excessive tension of the fabric.
Then there is the laying of the floor elements. H-floorboard It's going to be sequentially assembled, first the center, then the side, and it's important to make sure that the harnesses don't twist, and after all the sheets are laid, the cylinders and the keel are finally pumped to the working pressure.
☑️ Preparation of the boat for the first launch
The final stage is the installation of a transom board and the inflating of the seats. Working pressure This is usually 0.2 atm for cylinders and up to 0.25 atm for the keel, and exceeding these values in hot weather can cause the seams to rupture, so always leave the valve a little open or blow the air when heated.
⚠️ Attention: Never leave a fully pumped boat in direct sunlight unattended. The air inside the cylinders expands when heated, which can lead to critical pressure increases and seam strain.
Driving and handling
On the water. The flagship 300NT It's a predictable, confident, inflatable keel, and it's a great wave cutter, and it's a good course stability, which means that you don't have to constantly adjust your course with your paddles or your engine tiller.
The model's carrying capacity allows for the seating of two adult fishermen with a full suite of equipment. passport capacity And the real operational is different, and for a comfortable fishing experience with active fishing, you'd better focus on a buoyancy margin of at least 30 percent.
When installing the engine with a capacity of 2.5-5 hp, the boat goes on plane with one person weighing up to 90 kg. With two passengers, it is difficult to enter the planing mode, and the boat goes into displacement mode, which saves fuel, but reduces speed. Management At high speeds remains stable, the roll on corners is moderate.
Compatibility with motors and tuning
For The flagship 300NT The ideal choice will be lightweight two-stroke engines with a capacity of 2 to 6 hp Popular models like Tohatsu M3.5 or Honda BF5 are perfectly combined with this body. It is important to consider the weight of the engine: for the 300th size, it is not recommended to use units heavier than 20-22 kg, so as not to overload the transom.
Owners often resort to tuningThe transom plate allows you to securely securely fix the motor, but when installing powerful models (5-6 hp), it is recommended to use a suspended transom or amplifiers to avoid deformation of the aft part.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 300cm | Including inflatable tubes |
| Full width | 136 cm | Maximum cylinder width |
| Load capacity | 350 kg | Considering the weight of the boat and equipment |
| Boat weight | 42 kg | In the basic configuration with floorboard |
| River. | 2-6 hp | Optimum 3.5-5 hp. |
Can I put the engine 9.9 hp on the flagship 300HT?
Technically possible, but highly discouraged, Tran can't withstand vibrations and weight, and only one person can plane with this power, which creates a dangerous situation on the water and quickly destroys the boat's structure.
Packaging and transportation
Folded together The flagship 300NT It's packed in two bags, one for the boat itself and one for the floorboard, and the dimensions of the bags allow you to place them in the trunk of a sedan or in the back seat, and the weight of the kit is about 42-45 kg, which is the average for boats of this class with a hard floor.
For long-distance transportation, it is recommended to use a protective awning or cover, especially if the trunk is open, this will protect PVC from abrasion on the side of the car and dirt. Storage in winter should be carried out in a dry room at a plus temperature.
When packing a boat for storage, do not always fold the floorboard along the same folding lines. Change the plywood folding places each time to avoid cracking and cracking in the material.
The paiola bag often has straps on the shoulder, which makes it easier to descend to the water. However, it is worth considering that the floorboard weight is significant, and it can be difficult for one person to drag the full kit.
Comparison with competitors
On the market. PVC Flagman has serious competitors such as Badger, Cayman or Mev. The flagship 300HT often wins at the expense of a more affordable price with comparable quality materials. However, competitors can offer more sophisticated ergonomic solutions, such as more comfortable seats or reinforced handles.
The main difference Flagship. It is a time-tested H-floorboard design that is easier to install than solid slate but stiffer than low-pressure inflatable floor (LDPB). For fishing, where a hard floor is important for mounting a chair or box, this option is preferable to NDB.
The 300HT flagship is a choice for practicality and proven design, and it is not the lightest or fastest boat, but one of the most reliable in its price segment for a relaxed fishing experience.
Frequently Asked Questions (FAQ)
What is the maximum pressure that can be applied to the cylinders?
The recommended working pressure is 0.2 atm (about 3 psi). Exceeding pressure to 0.25 atm is allowed for a short time, but in hot weather be sure to monitor the pressure as the air expands.
Can I use the 300HT Flagship boat to raft on the river?
Yes, the keel and H-floorboard design is great for alloys, but be careful with sharp stones and snags. Be sure to use protective belts on cylinders when you frequent landfalls.
What is the difference between the 300HT flagship and 300HC?
The T signifies the presence of a built-in translator for the motor. The K usually indicates a quiff boat without a translator (rowboat), although the configuration may vary. To install the motor, you need the translator version.
How to keep a boat in the winter?
The boat must be thoroughly washed, dried and folded in a straightened form (not necessarily completely inflated, but avoid sharp folds). Stored in a warm room, away from the heaters. floorboard is better stored horizontally or in a vertical position without load.
Which glue is best for repairing PVC Flagman?
Use only specialized two-component polyurethane adhesives for PVC (for example, Texacol or analogues). chloroprene-based adhesives or "Moment" give a temporary effect and can damage the material in subsequent professional repair.