Choosing a reliable inflatable boat for fishing or family vacation on the water is a task that requires a balanced approach, especially when it comes to a popular model. Flagship 320 NDLDThe boating market is full of offers, but this series stands out for its unique combination of low-pressure inflatable floor and high-load capacity. Buy a boat Flagship 320To get a time-tested tool for conquering water bodies without unnecessary overpayments.
In this article, we will discuss in detail all aspects of ownership of this vessel, from the design features to the nuances of choosing a place of purchase. estuary It's become the standard of comfort, and whether you should go after plywood floorboard modifications, and we'll analyze the current market offerings so you can make the right decision.
It is important to understand that buying PVC vehicles is an investment in safety and emotion. Boat Flagship 320 It has proven itself to be a workhorse that can withstand harsh operating conditions, but like any technology, it has its own specifications that you need to know about before you pay.
Design features of the model 320 NDND
The basis of the popularity of this model is the use of technology. NDMA (Low Pressure inflatable floor) Unlike classical solder floors, it uses a special membrane structure that becomes rigid when pumped, but retains elasticity, which allows you to significantly reduce the weight of the entire product and simplify the assembly process, since you do not have to spend time laying stringers and boards.
The cylinders are made of five-layer reinforced PVC, which provides high resistance to puncture and ultraviolet light. The keel design is often reinforced by a bolt around the perimeter, which protects the sides when moored to concrete berths or rocky banks. The flagship 320 is characterized by a high degree of tightness of seams made by the hot welding method.
⚠️ Warning: Despite the strength of the material, the inflatable floor is extremely sensitive to sharp objects at the bottom of the reservoir. Before descending, always check the entrance location for no broken glass or sharp stones.
The hardness system deserves special attention. Inside the NDND cylinders, there are special tapes that keep the bottom from swelling to the sides, keeping the geometry flat, and this is critical for the hydrodynamics and stability of the vessel in planing. buy for use with an outboard motor, it is this design that will ensure the best driving performance with minimal engine power.
Advantages of inflatable floor before floorboard
The main question that arises from the buyer: which is better - classic plywood floor or modern NDND? The flagship 320 answer is unequivocal in favor of the inflatable option, if mobility is the priority. The weight of a boat with NDND can be 5-7 kg less than that of a peer with floorboard, which is critical for single carrying or transportation in the trunk of a small car.
The second important aspect is assembly speed. The inflatable floor doesn't require installation, just pumping it up, you don't have to mess with dirty, wet boards after fishing, risking staining your clothes or car interior. The whole process of preparing for water takes minutes, which is especially valuable in windy weather or in poor lighting.
- 🚀 Mobility: Compact folded allows you to transport a boat even in public transport or take with you on hiking.
- 💧 Displacement: NDNDM provides better swelling and a softer run, as the bottom works as an additional shock absorber.
- 🛠️ Repairability: In case of damage to the inflatable floor, it can be sealed in the field, whereas replacing rotten plywood requires carpentry skills.
But it's worth noting that the solder floor gives you a sense of absolute hardness under your feet, which is more important to some parking anglers than dynamics. Flagship 320Often used as a cruising or tourist option, the benefits of NDND outweigh the current high-pressure PVC shape as good as plywood if working pressure is met.
Choice of transence and compatibility with motors
When buying it is important to decide on the type of transom, because it depends on the choice of motor. The flagship 320 typically offers options with a hinged or pasted transom. The hinged transom is lighter and cheaper, but it takes up space in the cockpit and requires installation each time. The glued transom increases the stiffness of the feed and allows for higher speeds, but adds weight.
For a length of 3.20 meters, the optimal engine power is considered to be a range of 5 to 9.9 hp With a 5 hp engine, the boat confidently goes into planing with one person and minimal load. If you plan to take two adults or a large amount of equipment, it is better to consider engines with a capacity of 8-10 hp This will ensure a confident run against wind and current.
| Motor type | Weight (kg) | Recommended loading | Speed (km/h) |
|---|---|---|---|
| 2-3.5 hp | 9-13 | 1 man + tackle | 6-10 (water regime) |
| 5 hp | 20-25 | 1-2 people. | 20-25 (planing) |
| 9.8 hp | 26-28 | 2 people + cargo | 30-35 (planing) |
It's important to consider the length of the lower unit motor. Flagship 320 A short leg (S) is usually the right fit, but if you plan to walk full load often, it is better to check the landing so that the screw does not capture air on the turns.
Package and additional accessories
The standard set when buying is often basic, so for full operation you will need to buy a number of accessories. First of all, we are talking about a quality pump. Two-stage foot or electric pumps with a battery make life much easier, since pumping NDNDT to working pressure (0.2 atm) by hand is quite laborious.
☑️ Checklist of purchase
Among the useful additions, we should highlight anchor systems. For a boat of this size, an anchor weighing 3-4 kg, but always with a carbine-flame, is enough to pull the flogging and release the anchor when stuck, and it will also be useful to purchase transom wheels that will allow one person to easily move the boat with the engine along the shore.
Special attention should be paid to the seats: regular cans are often hard and uncomfortable for long fishing; buying soft seats with mounts or inflatable cushions will make staying on the water more comfortable; You can use sealers or special bags attached to the board to store gear.
⚠️ Warning: Do not use car pumps to pump cylinders without a pressure gauge. Excess pressure in hot weather can cause joints to rupture or deform the structure.
Where to buy: Market and Seller Analysis
Question: Where Buy a boat Flagship 320 NDNDMThere are three main sales channels: specialized boating stores, large marketplaces and ads from individuals or regional dealers, each with its pros and cons to consider.
Specialty stores offer full warranty support, pre-sales training and expert advice, where you can physically touch the material, assess the quality of the seams and get a check for the warranty event, but prices here can be higher due to retail overheads.
- 🏪 Official dealers: Quality assurance, availability of all certificates, professional advice, but often higher price.
- 📦 Marketplace: Ease of delivery, often low prices, but high risk of getting the goods with defective transportation and difficulties with return.
- 🤝 Private announcements: Low price, the possibility of bargaining, but the lack of a guarantee and the risk of buying stolen or defective products.
How do you check the seller?
Ask for close-up photos of the seams. Notice if there are adhesives or irregularities. Check the year of the boat's release, because PVC has the tendency to age even in a warehouse. Ask for a check and a completed warranty stamped by the seller.
When buying online, carefully study the delivery conditions. The boat in the package weighs about 30-40 kg, and the services of porters can be expensive. Also check the seller's rating and reviews about the delivery of this product - often damage occurs in logistics, not in production.
Care and storage for extension of service life
And The flagship 320 has been in service for years, and you have to follow the rules of operation, and after every trip, especially on salt water or in hot weather, it is advisable to rinse the boat with fresh water, and the sand and salt act as an abrasive, gradually destroying the protective layer of PVC.
Keep the boat in a dry, ventilated room, away from direct sunlight and heaters. The optimal storage temperature is from -20 to +40 degrees, but it is better to avoid extreme values. Before long-term storage (for the winter), the boat should be thoroughly washed, dried and slightly sprinkled with talc so that the layers of PVC do not stick together.
Check the pressure in the cylinders regularly. In cold weather, the pressure drops, and you may feel that the boat is poisoning, although this is just the physics of gases. In heat, on the contrary, the pressure increases, so it is better to put some air in the sun to avoid overloading the seams.
Use a special PVC preservative spray after washing, which creates a protective film, repels dirt and prevents the material from drying out in the off-season.
Frequently Asked Questions (FAQ)
What is the real load capacity of the Flagship 320?
rated carrying capacity is usually around 400-450 kg, however, for comfortable and safe movement, especially on the wave, it is recommended to load the boat no more than 70% of the maximum, that is, about 300 kg (including the weight of passengers, engine, fuel and equipment).
Can I repair my NDD myself?
Yes, small punctures and cuts are easily repaired with the remix that comes in the supply. For more serious damage to the bottom, you may need to replace the membrane, which is better entrusted to the specialists in the service center to maintain tightness.
Do I need to register a 320 cm boat in GIMS?
According to the current legislation of the Russian Federation, small vessels weighing more than 200 kg (in running order) or with an engine power of more than 8 kW (about 10.8 hp) are subject to registration. Flagship 320 The base weighs less than 200 kg, and if you use a motor up to 10 hp, you don't need registration, but the rules can change, so you need to clarify the current information.
Which glue is best for PVC repair?
For PVC boat repairs, two-component polyurethane adhesives (such as Texacol or specialized PVC adhesives) are best used, providing an elastic and water-resistant seam that can withstand deformation when inflated, and a conventional "moment" or rubber adhesive is not suitable for this purpose.
The flagship 320 BNDD is a choice for ease and comfort, and the right care and choice of a trusted seller guarantee years of trouble-free operation on the water.