When choosing the first boat for fishing or family walks on weekends, many boaters stop their eyes on compact models made of PVC, and Flink 300 This class of boats with a length of about three meters is considered the "golden mean" for single operation or use by two with minimal equipment, allowing you to comfortably accommodate with an engine of up to 8-10 hp However, before buying it is extremely important to understand not only the declared parameters, but also the real ones. performanceWhich may differ from the dry numbers in the catalog.
In this article, we will discuss everything in detail. specification We'll look at the design of the cylinders, the quality of the seams, and the impact of various factors on performance, and we'll see why passport weight and scale weight may differ, and whether you should overpay for additional options like a hard transom or an inflatable floor. Objective evaluation It will help you make an informed decision and avoid common mistakes when completing.
It is worth noting that the inflatable boat market is dynamic and manufacturers can make design changes without notice, so current data should always be checked against a specific instance. parameters The models remain stable and allow us to get a clear idea of the boat's capabilities. Let's dive into the technical details.
Overall dimensions and capacity of the cockpit
The first thing that the buyer notices is the total length, which is exactly 300 centimeters in the Flink 300 model. However, for the angler, the interior space is more important, that is, the useful length of the cockpit, which usually varies between 230-240 cm depending on the diameter of the cylinders, and this parameter determines how comfortable you will be sitting, throwing fishing rods or just stretching your legs during the transition.
The width of the boat is also a critical parameter that affects the resilience The standard width of the Flink 300 is 136 cm, which is a great indicator for a three-meter boat, and this width allows you to feel confident even when you move sharply or stand up in full growth, which is especially true for spinning people who need active wiring of the bait.
It is important to take into account the height of the board, which in this model is usually 38 cm This is quite enough to protect against splashes in calm water, but with strong wind or excitement, the water can swamp inside, if not careful. Diameter of cylinders It directly affects the load capacity and buoyancy margin, so three-meter models are often made with an increased diameter to compensate for the length.
When planning a fishing trip, it is worth remembering that a comfortable width per person with gear and motor should be at least 60 cm In the case of the Flink 300, the space is distributed quite ergonomically, but for two adult men with heavy equipment can become crowded, especially if used bottomIt eats a portion of the internal volume.
Manufacturing materials and tissue density
The basis of durability of any inflatable boat is the material from which it is made. For the Flink 300 model, reinforced polyvinyl chloride (PVC) is used, which is a multilayer fabric with high tensile strength and puncture. The density of fabric as standard is usually 750 g / sq.m., which is a high-strength fabric. balance-sheet between the weight of the product and its wear resistance.
The denser fabrics (850-1100 g/sq.m.) are indeed stronger, but they significantly increase the boat's overall weight, which is critical for a 3-meter model that often has to be dragged by hand. The fabric of 750 g/sq.m. holds pressure perfectly, is resistant to fuel (gasoline, oil), ultraviolet rays and temperature changes. Key feature Flink material is a special treatment of reinforcement threads, preventing rot and spread of microcracks.
The seams connecting the cloths are coated using two-component glue, which ensures high tightness. The quality of the seam depends not only on the glue, but also on the skill of the assembler, so it is recommended to inspect the joints visually for bloating or non-gluing. compound It directly affects the safety of operation.
When buying a used boat or after winter storage, be sure to check the seams for stratifications, slightly pressing your finger on them in a pumped state.
Light colors (gray, light green) are less heated in the sun, which prevents excessive expansion of air inside the cylinders and pressure surges. Dark colors (khaki, camouflage) are better at masking the boat on the water, but require more frequent putting pressure on in hot weather to avoid overload stitches.
Bottom design: inflatable or rigid?
Choosing a bottom type is perhaps the most important question when trimming the Flink 300. There are two main options: high-pressure inflatable floor (HPD) and a hard plywood or aluminum plywood bottom. advantages and the shortcomings that determine the scenarios of the boat.
Air Deck turns the boat into a full mattress, providing maximum comfort and thermal insulation, and you can sit on the bottom without additional lining even in cold water, and assembly takes a few minutes — you just need to pump and insert the beams. But the sailing solution is higher, and the speed of plane with the engine will be lower due to the deflection of the surface.
A hard-bottomed, plywood or aluminum floor provides perfect hydrodynamics and maximum speed. A hard-bottomed boat is better at cutting waves, more predictable to operate, and durable. But it takes time and effort to build, and when assembled, it takes up more space and is heavier to transport.
☑️ Choosing a bottom type
For fishing from anchor, where speed is not critical, and the comfort and opportunity to kneel is important, often choose NDMAFor active walks, trolling or use on large reservoirs with chop, hard hard water is preferred. floorIt gives you confidence in the stability of the course.
⚠️ Note: When using a high-pressure inflatable floor, it is strictly forbidden to exceed the recommended pressure (usually 0.25-0.3 atmosphere) indicated in the passport, as this may lead to rupture of the internal partitions.
Transportability and weight in the collection
One of the main reasons for the popularity of three-meter boats is their transportability: when assembled, the flink 300 with an inflatable floor easily fits into the trunk of most passenger cars or even in a large backpack. The weight of a soft bottom kit usually does not exceed 25-28 kg, which allows you to carry it to one person for short distances.
If you choose a hard floorboard bottom version, the weight increases to 35-40 kg depending on the thickness of the plywood and the presence of aluminum stringers, in this case, it almost always requires a second person to carry to the water or the use of a special wheelchair trolley, which greatly facilitates the transport of the water. logistics.
The dimensions of the packed boat also depend on the configuration. The bag with the NDND is elongated, but small in thickness, whereas the package with the floorboard can be wider, but more compact in length. decisive a factor of choice.
The secret of compact packaging
To reduce the volume of the boat with floorboards during transportation, you can use a vacuum pump (with caution) or simply stack the elements as efficiently as possible, alternating layers of fabric and boards.
When choosing, you should consider not only the weight of the boat itself, but also the weight of additional equipment: anchor, fuel tank, life jackets and gear. The real load per person when carrying can be significantly higher than the declared weight of the “dry” boat.
Technical specifications and data table
For convenience of comparison, we will summarize the main parameters The Flink 300 models are averaged for standard equipment and may vary slightly depending on the year of release and the specific modification.
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 300cm | Standard of dimensions |
| Width | 136 cm | Maximum width |
| Height of board | 38 cm | From the bottom plane |
| Load capacity | 350-400 kg | Depends on the type of bottom |
| Max, engine power. | 8-10 hp | Recommended range |
The 350-400 kg capacity allows you to accommodate two adult passengers, a motor, a battery and the necessary equipment with a safety margin. gelling It is possible only when loading close to the minimum (1-2 people without excess cargo).
The diameter of the pump valves is usually standard, allowing the use of most car and foot pumps. The presence of a grass knife on the lower unit motor is mandatory when operating in overgrown water bodies to protect the body of water. cylinders cuts.
The optimal load for planing with a motor of 5-8 hp - no more than 150 kg (driver + minimum set of gear).
Recommended motors and driving performance
For the Flink 300 boat, two-stroke or four-stroke engines with a capacity of 5 to 10 hp Motors with a capacity of 2.5-3.5 hp will allow you to confidently move against the current and enter a mode close to planing with one person on board, but complete comfort will not provide.
The 6-8 hp motors are the middle ground, and they allow you to get the boat to planing with one adult and a small supply of gear, with two passengers, the speed will be lower, but the ride will remain economical and confident. More powerful engines (9.9-10 hp) make sense only for professional fishermen using the same. trolling Or carrying heavy loads, as they increase the total weight of the kit.
When you install the motor, it's important to set the angle of the trim and the height of the transom, so that if you raise the motor too high, you can capture air ("cavitation"), and if you set the motor too low, you can create excess water resistance. setup It saves up to 20% fuel and increases the speed.
⚠️ Warning: When using a boat with an engine, always use a safety cable (fal) for the engine, so that in the event of its falling overboard, you do not lose the screw or lower unit.
The speed of a 5-6 hp single-person engine is about 18-22 km/h, which is enough for fishing and cruising. Fuel consumption is minimal, making the Flink 300 a very economical option for frequent use.
FAQ: Frequently asked questions
Is it possible to go out into the open water on the Flink 300 (Ladoga, Onega)?
Open water is only possible in cool weather and in close proximity to the shore. A boat 3 meters is not designed for great excitement, and the risk of being thrown overboard or overturned on such a vessel is very high. Always assess your strength and the availability of life jackets.
How to keep a boat in the winter?
The boat should be thoroughly washed, dried and folded in a free state (not tightly twisted) in a warm room, optimally stored in suspension or on a shelf to avoid deformation of the seams and fabric under its own weight in a crumpled state.
How long does a PVC boat last for active operation?
With careful use, storage in the shade and no punctures, the life of a quality boat is 7-10 years or more, the main enemies are ultraviolet, sharp objects and improper storage in the cold.
Do I need to register Flink 300 with GIMS?
According to the current legislation of the Russian Federation, small vessels weighing more than 200 kg (together with the engine) or with an engine power of more than 8 hp (for PVC boats) are subject to registration. The flink 300 with a light engine up to 5 hp most often does not require registration, but the rules may change, so please specify the current information.