Finding the perfect swimming aid for fishing or river walks often leads to a model frigate 300It's one of the most popular boats in the budget segment, which combines compactness and decent driving performance, and many anglers choose this option because of its versatility and outboard power.
In this article we will discuss in detail the technical features, design nuances and real impressions of operation. flyboatYou'll learn why it's so popular with quiet hunters and what's behind the "300" label in the model's name, and understanding these details will help you make an informed decision before you buy it.
It is worth noting that High Pressure Air Deck design This is a key difference from the classic plywood piels, which is the element that makes the body rigid and allows you to achieve decent speeds on the water. Let's go through all the aspects in detail.
Construction and materials of the shell
The basis of reliability of any boat is the material from which it is made. frigate 300 It uses high-density multi-layer reinforced PVC, which is resistant to ultraviolet, gasoline and oils, which is critical for long-term use in harsh environments.
The boats have three independent inflatable tubes, which provide a high degree of safety, and if one of the compartments is punctured, the other two will keep the boat afloat, allowing it to safely reach the shore. compartmentalization It is the standard of safety for all quality models.
The bottom is made using high-pressure inflatable floor technology, which avoids heavy plywood or aluminum floorboards, significantly reducing the overall weight of the kit, and when assembled, the boat becomes much lighter, making it easier to transport and launch alone.
- ✅ Used reinforced PVC density of 750 g / m2 for increased strength.
- ✅ The presence of a timber around the perimeter to protect against impacts on the pier.
- ✅ The glued transom is reinforced with fiberglass for reliable fixation of the motor.
- ✅ Reinforced linings on cylinders in the places of attachment of switches and liner rings.
⚠️ Attention: Despite the strength of the material, avoid contact with sharp stones and thorny bushes on the shore. Even reinforced PVC can be damaged if handled carelessly.
Technical specifications and dimensions
The overall data of the model determines its capacity and behavior on the water. frigate 300 The size of the boat is the best size for two people with a minimum set of equipment or one angler in comfort.
An important parameter is the load capacity, which allows you to take on board not only passengers, but also the necessary equipment. The design of the cylinders has a significant diameter, which ensures good buoyancy and height above the water even when fully loaded.
For clarity, compare the main parameters in the table:
| Parameter | Meaning |
|---|---|
| Full length | 300cm |
| Full width | 136 cm |
| Diameter of the cylinder | 36 cm |
| Load capacity | 400 kg |
| Boat weight (set) | 26 kg |
The assembly weight is about 26 kilograms, which is a very good indicator, and for comparison, models with a hard bottom of similar size can weigh significantly more because of metal or wooden elements. Transportation
inflatable floor features (BBD)
The use of high-pressure inflatable bottoms (HPD) is a game-changing experience, and unlike traditional solder boats, you don't have to spend time assembling and disassembling the floor, mounting stringers, and fixing sheets.
The process of preparing for the launch takes minutes, you just need to pump the cylinders and the bottom to working pressure, after which the boat is ready for operation, which is especially valuable in windy weather or when you need to quickly pack and swim away.
The hardness of the floor is provided by internal vertical threads-heavy, which prevent the bottom from swelling to the sides under air pressure, resulting in a flat and hard surface, which can be safely moved while fishing. Aerodynamic properties This type of silk also helps to improve the quality of the silk.
The secret to the stringency of NDNDM
Inside the bottom cylinders are thousands of strong threads connecting the upper and lower walls, and when pumped to 0.2-0.25 atmospheres, these threads are stretched, turning the soft shell into a hard plate that can withstand human weight.
However, it should be borne in mind that the inflatable floor is more sensitive to punctures from below than plywood or aluminum. When mooring to a rocky shore or pulling a boat out in shallow water, care must be taken not to damage the water. work-surface.
Installation and operation of the motor
Model frigate 300 It is designed for outboard motors with a capacity of up to 5-6 horsepower. The trunk of the boat is made of moisture-resistant plywood and reinforced with linings, which allows you to withstand the vibrations and thrust of the engine without deformation.
When choosing a motor, it is important to consider not only power, but also weight. An engine that is too heavy can overload the stern, changing the differentiation and deteriorating handling, and lightweight two-stroke or modern low-power four-stroke engines will be the optimal choice.
- 🚤 Maximum recommended engine power: 5 hp
- 🚤 The height of the transom meets the standard for most motors.
- 🚤 Possibility of installing an electric motor for silent movement.
- 🚤 The presence of protection of the transom from rubbing with the cable.
To achieve the planing mode with one person, a motor with a capacity of 3-4 hp is enough. If you plan to fish together, it is better to consider the option with a 5-horsepower unit. Speed specifications in this case, they allow you to comfortably move around the reservoir, saving time for transitions.
☑️ Check before installing the engine
⚠️ Attention: Never leave a running motor unattended and always use a safety cable (chek) when driving.
Comfort and equipment
The ergonomics of the boat are designed to provide maximum comfort during fishing. The spacious cockpit allows you to comfortably fit with fishing rods, tackles and other accessories. Soft inflatable seats (banks) are included in the basic equipment and easily move along the length of the vessel.
The nose has an inflatable rack flooring that protects the bottom from damage and keeps the legs dry, and the nose often has an anchor pouch and a handy handle for carrying or mooring. thoughtful design.
The kit usually includes a carry bag, refit, pump and product passport. The bag is made of durable fabric and has comfortable straps, which facilitates the delivery of the boat to the descent. In some versions, additional pockets for small things may be present.
Use a special glue for PVC when repairing punctures and be sure to degrease the surface before gluing. This ensures the seam tightness and durability of the repair.
To increase comfort, many owners purchase additional accessories: soft seats with backrests, holders for rods and anchor systems. Tuning allows you to adapt the basic model for specific tasks, whether it is trolling or catching in the throw.
Comparison with competitors and final choice
There are many analogues on the market, such as Flagship, Mev. or hunter. However, frigate 300 Competitors may offer cheaper options, but savings are often achieved through the use of less dense PVC or simplified seam design.
When you're choosing a boat, you need to look at the number of layers of material in critical areas and the quality of the transom pasting, and these are the units that carry the bulk of the load. Service resource It depends on the reliability of the connections.
In conclusion, this is a great choice for those who value mobility and ease of use, it does not require complex maintenance and is ready to work in any environment, and it will provide long years of service if it is properly operated.
The frigate 300 is the optimal balance between the lightness of the inflatable floor and the reliability of the classical design, ideal for fishing alone or together.
Can the Frigate 300 be used on seawater?
Yes, the materials used to make the boat are resistant to salt water, but after each unloading at sea, you need to thoroughly wash the boat with fresh water to avoid crystallizing salt on the valves and fabric, which can damage the material.
What pressure should I pump into the cylinders?
The recommended operating pressure in the cylinders is 0.2 atmosphere (about 200 mbar). For the bottom of the high pressure, the value can reach 0.25 atm. Do not pump the boat in the sun, as the air inside heats up and the pressure increases, which can lead to rupture of the seams.
How many people can comfortably fit in a boat?
Passport capacity allows two adults to be accommodated, but for comfortable fishing with lots of equipment, one person is considered optimal, and two anglers will feel cramped, especially when fishing actively.