The modern small boat market offers many solutions for water tourism and fishing, but the model is not limited to the sea. Frigate 310 Air NDNDM The boat is a perfect balance between compactness in transport and seaworthiness on water, and the main feature is the use of a high-pressure inflatable floor, which reduces the overall weight of the product to a minimum.
For many boaters, weight is the deciding factor when buying. You can easily submerge this one. compact-boat The trunk of the sedan is designed to provide maximum stability even in the event of heavy chop, while maintaining ease of handling.
In this article, we will discuss in detail the technical nuances, features of operation and hidden features of this model. NDMA (Low Pressure inflatable floor) is not exactly the exact term in this context, and why Air Deck’s high-pressure technology is used here.
Series inflatable boats frigate They've long been proven to be reliable water assistants, and the range is constantly being improved, introducing new materials and technologies for gluing seams, and understanding how these vessels work will help you make the right choice and extend the life of your boat.
Technical specifications and dimensions
The overall dimensions of the Model 310 determine its classification as a small vessel that does not require registration with the GIMS when installing a motor with a capacity of up to 10 hp (although the passport power is often higher), the length of the hull is 310 cm, which is the optimal size for accommodating two or three people with a full set of equipment.
Boat width also matters for sustainability. - In the model Frigate 310 It allows even the inexperienced boatmaster to feel confident on the water, and the high sides provide additional protection against splashes, which is especially important when moving against a wave or catching fish from aboard.
When measuring the dimensions for the trunk, keep in mind that the packing length is about 110-120 cm in deflated form, which allows you to transport the boat even in small hatchbacks.
It is important to note the payload, which is often indicated with a margin: the real payload allows you to take on board not only passengers, but also heavy equipment, anchors and additional fuel. Load capacity It depends on the correct pressure in the cylinders and bottom.
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Full length | 310 | centimeter |
| Full width | 136 | centimeter |
| Load capacity | 450 | kilogram |
| Boat weight (with bag) | 34.5 | kilogram |
| Passenger capacity | 3 | man. |
The material of manufacture is reinforced PVC This material is resistant to ultraviolet light, fuels and lubricants and mechanical damage, and the five-layer fabric structure ensures that the product is sealed and durable in all climates.
Air Deck floor design: advantages and features
The key element that distinguishes this model from the classic solder boats is the floor. Air DeckIt's a high-pressure inflatable floor that replaces heavy aluminum or plywood floorboards, and it's a design that allows you to significantly reduce the weight of the entire kit, which is critical for mobile fishermen.
Inflating the floor is carried out to a pressure of 0.2-0.25 atmosphere (about 3-4 PSI), which gives it a rigidity comparable to solid materials, while the surface remains elastic, cushioning the shocks against the waves. Floor rigidity It provides comfortable movement on the cockpit without the effect of "hammock".
⚠️ Warning: Do not use car compressors without pressure control to pump the Air Deck floor. Excess pressure can cause seams to rupture or deform the geometry of the bottom, and under-pumping will make cruising on the boat impossible.
Unlike low-pressure (LDP), where the bottom sags between the cylinders, the high-pressure system creates a single rigid platform, which improves the fluid dynamics of the vessel and allows for higher speeds with less fuel.
The flooring technology involves the use of special ligaments that connect the upper and lower surfaces of PVC, which hold the shape and prevent the floor from swelling into a ball, and the maintenance of such a bottom requires only periodic inspection of the valves and no punctures.
Cylinders and damage protection
Model cylinders Frigate 310 They're divided into several independent compartments, and this allows for buoyancy even if one of the cylinders is damaged, and the sections are separated by internal bulkheads, which also add extra rigidity to the structure.
The outer part of the cylinders is equipped with a landing bar, a special rubber rope that encircles the boat around the perimeter, its main function is to protect the board from impacts on the pier, rocks or other boats when mooring. Layer-bar It also prevents the wiping of the fabric about the unevenness of the soil when pulling on shore.
To provide additional protection for the nose and cylinders, they use thicker material linings, which take the brunt of the impact of speed bumps, and these linings significantly extend the life of the body's main material.
- 🛡️ Multi-layer PVC: Used fabric density of at least 750 g/sq.m., resistant to abrasion and puncture.
- ⚓ Leer cable: Along the cylinders stretch a cable, which serves to fasten the safety ends and additional reinforcement of the structure.
- 🔧 Valves.Petal valves are used to ensure rapid release of air and reliable pressure retention without blowing.
The color of the material is also worth mentioning: gray or dark green camouflage not only masks the boat on the water, but also heats less in the sun, which is important for the comfort of passengers and the preservation of the properties of adhesive compounds.
Operation and selection of motor
Selection of engine Frigate 310 It depends on your goals. For a quiet fishing and cruising, a 5-9.9 hp motor is enough, and it will allow you to reach speeds of about 20-25 km / h with one or two passengers. It is an economical and quiet option.
If you plan to plane with full load or water skiing, it is worth considering the engines with a capacity of 15-20 hp However, it must be borne in mind that the transom of the boat must withstand the appropriate load. transom board This model is reinforced, but should not exceed the recommended power.
Gleaming secrets
To go into the plane with a 5-6 hp engine, it is important to distribute the weight correctly, move the load and passengers closer to the nose, and sit on the front can yourself, which will help to quickly remove the nose from the water.
Motor fastening is done through transom plates. It is important to (regularly check) the condition of fasteners and nuts, because vibration when the engine is running can weaken the connections. Using a thread lock will help to avoid loss of fasteners on the water.
When operating in salt water, all metal parts must be thoroughly washed with fresh water after each exit, and aluminum parts of the transom and fastener are particularly prone to corrosion in aggressive environments.
☑️ Preparation for the waterway
Package and additional accessories
Standard equipment usually includes the boat itself, the bag-pack, remix, seats (banks) and the pump. However, for full use, it is recommended to buy a number of accessories that will increase comfort and safety.
First of all, you should get a high-quality anchor. For a boat with a length of 3.1 meters and a width of 1.36 meters, an anchor weighing 3-4 kg will be optimal. The type of anchor (cat, plow, Admiralty) depends on the type of bottom of the reservoir where you plan to fish.
Also useful will be additional bags for equipment that are attached to the nose or sides of the boat, which allow you to keep things dry and free up space in the cockpit. Hanging bags PVC is perfectly combined with the design of the boat.
- 🎣 The rod-holdersAllows you to free your hands when fishing by trolling or drifting.
- 💡 The hinged transom: Additional area for attaching the sonar or GPS sensor.
- 🛡️ Protective tentIt will save you from the rain or the scorching sun during long stops.
Keep in mind the safety features. Lifeguards should be by number of passengers, not by number of seats in the boat, and having a water scoop and a repair tape in an accessible location is a must.
Care, storage and repair
Durability of the boat Frigate 310 After each operation, especially in salt or dirty water, the boat must be washed with fresh water and thoroughly dried before packing, and keeping a damp boat in a bag will cause mold and break the adhesive seams.
It is better to keep the boat straight at room temperature, and if this is not possible, then in a deflated state it should lie in a dry, dark place. Ultraviolet PVC is the main enemy of PVC, so do not leave the boat in the open sun unnecessarily for a long time.
⚠️ Warning: Never leave a fully pumped boat in the sun. When heated, the air inside expands, the pressure rises and may exceed the maximum permissible limits, which will lead to rupture of the seams.
For minor punctures or cuts, use the remix kit that comes with the kit, degrease the surface, apply glue and patch the same material, and for more serious damage, contact a specialized service.
Proper drying and storage away from direct sunlight is a guarantee that your boat will last 10 years or more without losing its tightness.
Check the valves regularly for contaminants. Sand or a blade of grass that falls under the valve petal can cause slow air venting. Cleaning the valves takes a couple of minutes, but saves you from trouble on the water.
Frequently Asked Questions (FAQ)
Can I pump a 310 Fregat boat with a car pump?
The car pump can only be used for initial pumping of cylinders, but always with pressure control with a gauge. For final pressure (especially for the Air Deck floor), it is better to use a foot or hand pump with a pressure gauge, so as not to pump or damage the seams.
What is the maximum speed on water with a 9.9 hp engine?
With a 9.9 hp engine and one passenger boat Frigate 310 can reach speeds up to 25-28 km / h With a full load (3 people), the speed will decrease to 15-18 km / h, which is the normal mode for glides.
Do I need to register this boat with GIMS?
Under current regulations, boats weighing less than 200 kg and with an engine of up to 10 hp (inclusive) are not subject to registration. Frigate 310 If you have a 10 hp engine, you're within that limit, you don't need to register, but the rules can change, and you need to check the current legislation.
How to keep a boat in the winter?
In winter, the boat should be kept in a warm room (garage, storage room) at a temperature of not less than -15 ° C (although PVC holds and, better not risk), the boat should be clean, dry and slightly deflated to compensate for temperature changes. It should not be packed in airtight polyethylene.