Choosing a boat for fishing or resting on the water is always a compromise between cost, folded dimensions and carrying capacity. Insert 220 It has proven to be a reliable option for a single person or a small company of two fishermen, and it is often the first serious purchase for aspiring water-engineers who are not yet ready to invest in expensive aluminum enclosures or complex inflatable floor structures.
The popularity of this series is due to the combination of classic design and affordable price, but in order to operate only bring pleasure, you need to clearly understand the technical limitations and features of the series. materialIn this article, we will look at all the nuances, from assembly to modernization, so that you can make an informed decision.
The key advantage of the model is the ability to install an outboard motor with a capacity of up to 3.5 hp with a boat's own weight of only 22 kg. This makes it mobile and portable, allowing it to carry the trunk of even a compact passenger car, and then we'll look at what's behind the modest appearance of this boat.
Design features and materials
The basis of durability of any inflatable boat is the material from which the balloon is made. Insert 220 reinforced PVC The density of the fabric is usually 750 g/sq.m., which is the standard for boats of this class, and is resistant to gasoline, oils and ultraviolet radiation, but requires careful handling when in contact with sharp objects on shore.
The design of the balloon is made by technology sutureIt's important to note that seams are the most vulnerable to misuse, so they need to be checked regularly, and the shape of the nose is designed to minimize the amount of spray that gets into the cockpit, although it's not completely avoided at high wavelengths.
⚠️ Warning: Do not keep the boat inflated in direct sunlight in hot weather. The air pressure inside the cylinders may exceed the permissible limits, leading to rupture of the seams or deformation of the material.
The bottom of the boat is most often represented by plywood decks consisting of several sections. This solution provides rigidity of the structure and the ability to stand confidently during fishing. The plywood is used moisture resistant, but it is not waterproof in the long run, so drying of the deck elements after each fishing is mandatory. In some versions, there may be a low-pressure inflatable floor, but the classic version involves a hard slate.
Technical specifications of the model
To understand the possibilities of the boat, you need to turn to dry numbers. Insert 220 They allow one adult to comfortably accommodate with a stock of equipment. The length inflated condition is 220 cm, which is reflected in the model name, and the width is about 110-115 cm. These parameters provide sufficient stability in calm water, but in strong currents or winds require careful management.
The load capacity is critical. Passport load capacity is usually reported in the range of 220-250 kg. This includes the weight of people, engine, fuel, gear and the hull itself. The actual payload at which the boat remains safe and manageable is often below the passport. Excessive load leads to lower height above the water and loss of driving performance.
Below is a table with the main technical data that will help compare the model with analogues:
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 220 cm | Inflated condition |
| Full width | 112 cm | On the outer cylinder. |
| Load capacity | 220 kg | Including boat weight |
| Weight gathered | 22 kg | No motor or hinge. |
| Engine power | up to 3.5 hp | Recommended |
It is important to note that the weight assembly is specified for the basic equipment. When installing additional elements such as sonar, anchor or spare fuel, the total weight can increase significantly, so the load calculation should be done with a margin of 15-20%.
Assembly and preparation for launching
Assembly process Insert 220 It doesn't require any special skills, but following a sequence of actions will greatly speed up the process and prolong the life of the product, starting with the layout of the boat on a flat surface, you need to remove sharp stones, branches and other objects that can damage the material of the cylinder or bottom.
First, the cylinders are pumped. The pressure should not be excessive; the balloon should be elastic to the touch, but if you press your finger hard, there should be a small dent; excessive pumping in the sun is dangerous, and insufficient pumping in the sun worsens driving performance; then a stringer is installed (if the design provides for rigidity) and sections of the plywood floor.
☑️ Checklist for boat assembly
Once the floor is installed, you need to fix the tanning board, which is a critical node that senses the load from the motor. Make sure the locks are fixed securely. Only after complete assembly does it make sense to attach attach attach attach attachments like oar plugs or spinning holders.
⚠️ Warning: Never drag a assembled boat on the ground, especially on sand or gravel. Abrasive particles will quickly erase the protective layer of PVC, which will lead to the need for expensive repairs.
Operation and maneuverability on water
On the water. Insert 220 It's a very predictable behavior for flat-bottomed boats, and the main advantage is that it can be close to shore because it's flat-bottomed, but it's also a property that makes it sensitive to side winds, and inflatable models have high sailing speeds, so when the wind is strong, it can take a lot of effort to drive, especially when it's fun.
When using the motor, the boat only glides at minimum load and ideal weight distribution, most often used in displacement mode. The speed in this mode rarely exceeds 5-7 km / h, which is ideal for trolling or quiet movement between fishing points. Sharp turns at speed can lead to overturning due to the high center of gravity of passengers.
To improve handling, experienced users recommend shifting the load closer to the nose or center of the diametral plane, which aligns the boat and reduces yaw, and it is also worth noting that the boat can unfold on the side, so having an anchor or the ability to properly work with oars is mandatory.
Tuning and improvement DIY
Factory equipment is often minimalist, so owners often resort to the use of the equipment. tuningThe most popular option is to install reinforced flooring, native plywood can be thin, and when used actively, it bends, and replacing it with thicker, better plywood or composite materials greatly improves comfort.
The second important element of modernization is the protection of the bottom, and sticking an additional PVC tape or rubber on the outer part of the cylinders and bottom (called "tread") saves from punctures on shells and snags, which is especially important for fishing in river deltas or in wild bodies of water with rocky bottoms.
Also often installed additional attachments for attachments, these can be:
- 🎣 Holders for spinning (rod holders) - are attached to the board or trawler.
- 🔦 Fastenings for sonar and battery - require rigid fixation on the sleigh.
- ⚓ Anchor rim - is installed in the bow for convenient anchoring.
Rules for storage and care of PVC
Durability Insert 220 It depends on how you store the boat in the off-season, and the main enemies of PVC are mold, rodents and temperature changes. Before packing, the boat must be thoroughly cleaned with fresh water, remove all contamination and, most importantly, completely dry. A wet boat folded in a bag is guaranteed to be covered with fungus that will destroy the fabric structure.
It's best to store it in a straightened or half-blown state at room temperature, and if you can't do that and the boat is kept rolled up, it's recommended that you turn it around every few months, check for damage, and dry it again, so you can prevent the inner layers from sticking together and the seams from becoming deformed.
Small puncture repairs can be done on your own with a remix, which is usually included, using a special glue and patch of the same material, and it is important to degrease the surface before gluing and ensure that the glue is tightly pressed for the time specified in the instructions.
Comparison with competitors and final choice
There are many analogues on the market, such as boats. Flagship, hunter or brigCompared to them. Insert 220 It's lighter than many competitors of the same size, which is important for transportation, but competitors can offer more modern solutions, such as inflatable keels or reinforced transoms as standard.
If you're looking for rare shore trips that are difficult to get by car, or fishing in small lakes, this is a great choice. For regular use in large water areas or in high currents, consider larger low-pressure inflatable floor (LDPB) models that are more comfortable and safer.
In conclusion, Insert 220 It's a workhorse for frugal anglers, not a slick comfort, but a fair performance, and a good operation and timely maintenance will make this budget boat a reliable companion for years to come.
Frequently Asked Questions (FAQ)
Can I put a motor more powerful than 3.5 hp on the Inzer 220 boat?
Technically, you can also lock a more powerful motor, but it's dangerous, the transom board and cylinders in the mounting area may not withstand the increased load and vibration, and it violates the registration rules and can lead to failure in the event of an insured event, and it is recommended to adhere to factory restrictions.
How long does it take to assemble and disassemble a boat?
With experience, the assembly process (pumping, flooring, transom fastening) takes about 15-20 minutes; disassembly and packaging in a bag - about 10-15 minutes; time depends on the air temperature, because in the cold the material becomes tougher.
Do I need to register this boat with GIMS?
Registration is required if the mass of the boat in running order (boat + engine) exceeds 200 kg, OR the engine power exceeds 8 hp (or 10 hp depending on the year of manufacture and current regulations, which vary). Insert 220 light and motor is usually low-power, registration is often not required, but the rules should be clarified at the time of purchase.
How to fix punctures in the field?
For field repairs, it is best to use special two-component PVC adhesives (such as polyurethane) and patches from the kit. Glue pencils or "moment" for shoes are only suitable as a temporary solution, as they may not withstand water pressure and the elasticity of the balloon.