Choosing the first boat for fishing or family trips often turns into a difficult quest, where you have to balance the desire to save money and the need to get a reliable product. PVC model Insert 330 It has a special place, causing a lively debate among boaters, some say it is the perfect budget for small bodies of water, others point to design features that require addiction.
What does this represent? rowing or motor This is a classic flat-bottomed polyvinyl chloride reinforced boat that is positioned as a versatile solution for lakes, ponds and calm rivers, and its main feature is the combination of compactness and a sufficiently spacious cockpit for the declared size.
In this article, we will discuss in detail the technical nuances, real opportunities and hidden shortcomings so that you can make an informed decision.
Structural features and materials of the body
The basis of durability of any inflatable boat is the quality of the material used. Insert 330 manufacturer uses five-layer reinforced fabric PVCThe density of the material is usually 750 or 900 g/sq.m, which is the standard for medium-priced boats.
The cylinders are cylindrical in shape, which ensures good load capacity, but slightly reduces the stability with strong lateral excitement compared to oval cylinders. The seams are made by hot bonding, which ensures the tightness of the joints, provided that the product is properly operated and maintained.
⚠️ Attention! Despite the high density of PVC, the bottom of the boat is extremely sensitive to sharp stones and shell when landing. Use a protective mat or choose gentle sand slopes.
An important element of the design is graffitiIt's made of moisture-resistant plywood and reinforced with fiberglass or metal linings, allowing motors up to 5 hp to be installed without the risk of stern deformation.
The secrets of the stitches
What to look for when buying?: Pay attention to the overlapping of fabric in the gluing areas. They should be smooth, without bubbles and glue stains. Uneven edges may indicate a violation of production technology.
Floor system: Bulk bottom of NDND vs Slan
One of the most talked-about specifications of the model is the type of floor. The basic equipment often involves the use of an inflatable floor. NDMA This solution makes the boat very lightweight and compact when assembled, which is convenient for transport in the trunk of a passenger car.
But the soft floor has its own nuances, and when you put it under a motor, it can bend under the weight of the passenger and the engine, creating a hammock effect, which not only reduces comfort, but can also degrade hydrodynamics by increasing water resistance.
For those who plan to actively operate with the engine, it is recommended to consider the option with the laxative floor (aluminum or plywood sheets assembled into slots) The hard floor provides a smooth stream of kilvater and better stability on the water.
Replacing the sex is the first step tuningThe rigid design allows you to stand more confidently during the spinning roll and more efficiently glid.
Driving performance and water tests
How he behaves. Insert 330 The flat-bottomed design makes the boat look great. stability It's not prone to tilts when you move a fisherman inside a cockpit, which is especially important when you're fishing for a throw.
When you get on plane with a 3.5-5 hp engine, the boat performs average results. With one passenger and minimal load, it easily enters the scheduling mode. However, when fully loaded (two people plus equipment), the power of low-power engines may not be enough for confident planing.
High speed handling requires addiction, flat bottom makes the boat sensitive to ripples and shallow waves that are transmitted to the boat. kielson Or use transom wheels.
To improve the course stability when driving against the wind, it is recommended to move the seat (bank) closer to the nose or move the fuel tank to the nose for balancing.
It's important to note that hydrodynamics is very dependent on the state of the bottom. inflatable floor creates additional sailing and resistance, so for high-speed walks, a hard floor is almost a prerequisite.
Operation and compatibility with motors
Selection of engine Insert 330 It's about balancing weight, power and budget, and the maximum recommended power is 5 hp, but many people think of two-stroke models with 3.5 hp as the best option.
More powerful engines (4-5 hp) allow you to bring a boat with two adult passengers to the plane, but significantly increase the total weight of the kit. For single fishing, an engine with a capacity of 2-3 hp is quite enough, which will provide a speed of about 10-12 km / h.
When installing the motor, the height of the transom should be taken into account. short-leg (S) is 381 mm If the transom of the boat is lower, a spacer will be required, if higher - the motor will "blow" the nose.
| Parameter | Meaning | Comments |
|---|---|---|
| Full length | 330 cm | Optimal for 2 people |
| Full width | 145 cm | Sufficiently sustainable |
| Load capacity | 400 kg | Taking into account the weight of the boat ~ 300 kg useful |
| Boat weight | ~35 kg | Depends on the gender type. |
| Engine power | up to 5 hp | Optimum 3.5 hp. |
Don't overload the boat too much. load capacity Not only dangerous, but also critically reduces the speed and controllability of the craft.
Tuning and improvement for comfort
Basic equipment Insert 330 It's functional, but it's Spartan, and to make it more comfortable, many owners have resorted to upgrading, and the first thing they usually do is swap their regular wooden cans for lighter, more comfortable ones. aluminum Soft-laid seats.
The second popular upgrade - installation safety-liner Not only is it a safety feature that allows you to stay overboard when you fall overboard, but it's also a handy handle for pulling the boat ashore.
☑️ Minimum tuning set
You also need to pay attention to the protection of cylinders. timber And with a rubber insert all around the perimeter, it's going to save the sides from abrasion on the berths and reeds, and it's an inexpensive but very useful development.
⚠️ Attention! When installing additional equipment (echo sounders, navigators), watch for alignment. Shifting the center of gravity to the nose or stern can drastically change the behavior of the boat on the wave.
Rules for storage and care of PVC
And Insert 330 served for many years, you need to observe the rules of care for the material PVCAfter every fishing trip, especially in salt water or muddy bodies of water, the boat should be washed with fresh water and wiped dry.
Store the product should be spread out or rolled up in a free roll, avoiding sharp cloth cloth cloth. The optimal storage temperature is from -20 to +40 degrees, but it is best to keep the boat in a heated room or garage.
Check the pressure in the cylinders regularly. A sun-pumped boat can burst at the seams, and a under-pumped boat can lose its driving performance and wear out faster. Use a pressure gauge for control.
Compliance with the temperature regime and the absence of direct sunlight during storage increase the service life of PVC materials twice.
Do not forget about periodic treatment with special PVC chemistry, which restores the elasticity of the material and protects it from ultraviolet light.
Frequently Asked Questions (FAQ)
Can I put on the Inzer 330 engine 9.9 hp?
It's not recommended, the transom insertion and the cylinder design are not designed for this power and weight of the engine, and this can lead to the destruction of the stern and loss of buoyancy, maximum 5 hp.
How many people are comfortable in the boat?
Passport capacity is 3 people, but with comfort and fishing equipment, it is better to accommodate two. Three adults will feel cramped and the boat will lose driving performance.
Do I need to register a boat with GIMS?
According to the legislation of the Russian Federation, boats weighing more than 200 kg (together with the engine) or with an engine power of more than 8 hp (10.88 hp) are subject to registration. Insert 330 motors up to 5 hp usually do not require registration, as the total weight of the kit is less than 200 kg.
How to seal the boat in the field conditions?
For emergency repairs, use polyurethane glue-based remixes. For major repairs at home, it is better to use two-component PVC adhesives (for example, Texacol or analogues).