The search for a reliable and maneuverable vessel for fishing or recreation on the water often leads enthusiasts to study the products of domestic manufacturers. boat Oriole 2It's a very affordable and practical solution for all types of water, and it's a very important option for potential buyers. cost of the finished kit taking into account the current market fluctuations in polymer pricesHowever, the price is only the tip of the iceberg when choosing a floating craft.
inflatable boats in this class combine compact transport and sufficient load capacity for two people with a full set of equipment. Unlike cheap counterparts, it uses high-quality reinforced material that can withstand contact with rocky bottom and sharp branches. It is important to understand that the total purchase amount can vary depending on the equipment chosen, the presence of a hard floor and the type of valves.
In this article, we will discuss in detail what the cost is. Orioles 2You will learn about the differences between modifications, the peculiarities of using PVC materials in different weather conditions and get answers to frequently asked questions.
Review of model range and design features
The Oriole range includes several modifications, each with its own unique features. The basic version, often referred to simply as the Oriole 2, is a classic rowboat with inflatable tubes. However, there are also motorized versions on the market equipped with a transom for installing an outboard motor with a capacity of up to 3-5 hp. Flat Floor or with an inflatable floor, which significantly affects the price and driving performance.
The manufacturers pay special attention to the shape of the cylinders, which have pointed noses to better separate the wave, which allows the vessel to steer more confidently when going out into open water, which is rare in the budget segment. reinforced PVC The high density provides protection against puncture and abrasion, which is critical for inflatable boats often used in difficult conditions.
Inside the cockpit, you can have a soft seat or a rigid can of waterproof plywood, and the rigid element not only increases comfort, but also adds stiffness to the entire structure, allowing you to row more efficiently or control the engine. Some modifications are equipped with a perimeter hump, which protects the sides from impacts on the berth or on the side of another boat.
When choosing a specific modification, consider where exactly you plan to use the vessel. For grassy lakes, smooth-bottomed models are better suited, and for rocky rivers, reinforced options are better. Load capacity A standard two-seater model is usually around 220-250 kg, which is quite enough for two adults and a small amount of equipment.
Factors Affecting the Cost of the Oriole Boat 2
The price boat Oriole 2 It is not a fixed value and depends on many variables. First of all, cost determines the type of material used. Polyvinyl chloride (PVC) comes in different densities, measured in grams per square meter. A denser material (for example, 850 g / m2 vs. 750 g / m2) costs more, but guarantees a long service life and resistance to ultraviolet light.
The second important factor is the configuration. The basic version can only come with a carry bag and a remix. However, often buyers choose extended packages that include anchor, paddles with aluminum or wooden blades, a pump and even safety ends. transom The engine also significantly increases the price compared to the purely rowing version.
⚠️ Note: When buying, pay attention to the availability of certificates of conformity. Too low a price may indicate the use of poor-quality glue or secondary raw materials in the production of PVC fabric, which is dangerous for use on water.
Seasonality also plays a role in pricing: In the spring, before navigation, demand traditionally increases, which can lead to a slight increase in price; in the fall, when the season closes, manufacturers and dealers often conduct sales, allowing you to save up to 15-20% of the cost. Buying in the off-season is a great way to buy a quality thing cheaper.
Logistics and region of sale also make adjustments: Delivering large cargo to remote regions can cost almost as much as the boat itself. So when ordering online, always check the final cost with delivery to your locality. Sometimes it makes sense to look for local dealers, even if their base price is slightly higher.
Comparison of technical specifications of modifications
To understand which one modification of the Oriole 2 The best fit is to compare the technical parameters, and the differences may be not only in terms of engine compartment size, but also in terms of dimensions, number of air compartments and type of valves. Below is a comparative table of the main specifications of popular versions.
| Parameter | Oriole 2 (Rocking) | Oriole 2M (Motor) | Oriole 2 Luxury |
|---|---|---|---|
| Length, m | 2.40 | 2.60 | 2.60 |
| Width, m. | 1.15 | 1.20 | 1.25 |
| Load capacity, kg | 220 | 250 | 280 |
| Weight, kg | 18 | 24 | 26 |
| Max, engine power, hp. | - | 3.5 | 5.0 |
As you can see from the table, the engine versions have increased dimensions and weight, which is natural. Installation of the transom requires strengthening the design of the aft part, and the ability to install the engine dictates increased requirements for the strength of cylinders. The Luxury modification often features additional amenities such as rod holders, bags on the nose and reinforced liners.
The valve system can also vary. Current models use petal valves that provide tightness and ease of pumping. Older or budget versions may have simple inflatable valves that require more careful handling. Valve reliability is a safety issue, so there is no need to save on this element.
When buying a used boat, be sure to check the valves for leakproofness, applying soap solution to the inflated vessel. The appearance of bubbles will indicate air etching.
The choice between the rowing and motor versions should be based on your plans. If you plan to only walk short distances in quiet backwaters, the rowing option will be enough. For fishing in large reservoirs or rafting on the river with the flow, the presence of the motor will be a decisive advantage, despite the higher price.
Operation and care of a inflatable boat
Durability Oriole boats 2 It depends on how you care for it. PVC materials are resistant to water and sun, but they don't last forever. After every fishing or walk, it's recommended to rinse the boat with fresh water, especially if you've been swimming in a salty pond or water with a lot of silt, and this will prevent the adhesive sutures from breaking down and the smelling.
Storage of the vessel should be carried out in a dry, cool place, protected from direct sunlight. Inflating the boat for storage is not necessary, but it is also not necessary to blow it "to stone" - a little pressure will help to maintain shape and avoid cloth cloth cloth. The optimal pressure in the cylinders during storage is 0.01-0.02 atm.
☑️ Annual maintenance of the boat
Small puncture repairs can be done on your own with the kit that comes with the kit. It is important to degrease the surface and use the adhesive recommended by the manufacturer (usually polyurethane adhesives). Do not use Moment or other household adhesives that are not designed for PVC, as they can destroy the material.
⚠️ Warning: Never leave a pumped boat in the strong sun on a hot day. The air pressure inside the cylinders rises, which can cause the seams to rupture or deform the structure.
Transporting a boat in the trunk of a car requires care. The oriole 2 takes up little space, but sharp corners of tools or fishing boxes can damage the fabric. Use a regular bag or an additional protective cape. Also avoid carrying a boat with canisters of gasoline or other reactive substances.
Advantages and disadvantages of the model
Analyzing the owner feedback and technical specifications, we can identify a number of undoubted advantages. Oriole boats 2First and foremost, it's an affordable price, which makes it one of the most popular in the budget segment. The simplicity of the design means that there's almost nothing to break down here, and maintainability is high even in the field.
The boat is well-resilient on the water thanks to its wide-shaped cylinders, which make it comfortable for beginners who are just learning to row or drive a low-powered engine, and the compactness of the fold allows you to transport the boat in the trunk of a passenger car, which expands the geography of your water travel.
There are drawbacks to be aware of, however: rowing versions can be a bit heavy for long oar transitions due to the use of dense PVC. In addition, basic trim levels are often devoid of amenities such as leg fixtures or sonar mounts, which require self-equipment.
Hidden nuances of exploitation
In cold weather (below +5°C), the PVC material becomes stiff and the boat is harder to pump to working pressure, and it is recommended to warm the fabric with a hairdryer or leave it in the sun before pumping.
The noise of rowing can also be higher than that of low-pressure inflatable floor boats, because the hard bottom or slate resonates with the slats of the oars. But for the motor versions, this disadvantage is irrelevant. In general, the balance of price and quality remains the main trump card of this model.
The Oriole 2 is a workhorse for the amateur angler, offering maximum reliability for a minimal budget, but requiring careful storage.
Where to buy and what to pay attention to when ordering
Buy boat Oriole 2 You can also buy water from specialized boating stores or from large online marketplaces, and when ordering online, carefully read product photos and product descriptions. Often the price is for the "basic package", and the oars, pump and bag are sold separately, which ultimately increases the purchase budget.
When buying live, be sure to inspect the seams for adhesive inflows and gluing quality. The fabric should be uniformly colored, without bloating or blisters. Check the valves - they should open and close with a clear click. A warranty card and instructions in Russian are a mandatory requirement for official products.
Compare the offers of different sellers. Sometimes large chains offer lower prices due to volume, but small stores can provide better service and advice. Feel free to ask about the availability of spare parts and remixes for this model, as universal kits may not fit the size of valves or type of glue.
What is the real payload of the Oriole 2?
The declared load capacity of 220-250 kg is maximum. For comfortable and safe operation, it is recommended not to exceed 80% of this value, that is, to focus on 180-200 kg with people and cargo. This will ensure high board and good germination on the wave.
Can I install an electric motor on the Oriole 2?
Yes, motor versions (Oriol 2M) can be fitted with an electric motor if its power is not higher than what is allowed for a transom (usually up to 3-4 hp in equivalent). It is important to secure the motor, since electric motors often have a long lower unit leg that creates a lever.
How long does a PVC boat last?
With proper operation and storage, the service life Oriole boats 2 The main enemies are ultraviolet light, improper storage (in the cold or compressed state) and mechanical damage. Regular treatment with protective compounds prolongs the life of the material.
Do I need to register this boat with GIMS?
Under current Russian law, boats weighing more than 200 kg (in running order) or with an engine of more than 8 hp (5.88 kW) are subject to registration. Since the weight of the Orioll 2 is usually less than 200 kg, and engines are installed at low power, registration is most often not required, but the rules may change, so it is worthwhile to clarify the current regulations.