In the market of inflatable floating vehicles model known as Kama 350The vessel is a classic flat-bottomed structure made of reinforced polyvinyl chloride, making it attractive to a wide range of aquatic motors. Although production can vary depending on the manufacturer, the main design features remain similar, ensuring predictable behavior on the water.
This length, 3.5 meters, is often dictated by the desire to balance maneuverability with spaciousness, and unlike the shorter models, it can comfortably accommodate two or three passengers and accommodate the necessary equipment for a full fishing day. PVC when meeting with a wave or a sharp stone.
In this article, we will discuss all aspects of the operation of this model, we will touch on the technical details, talk about compatibility with different types of engines and consider the possibilities of modernization. Understanding the strengths and weaknesses will help you make an informed decision about buying or competently service an existing vessel.
Technical specifications and construction of the body
Shell design Kama 350 It is based on a time-tested scheme with inflatable sides and a rigid or inflatable floor, the overall dimensions are usually about 350 cm long and 160-170 cm wide, which provides good stability. The internal volume allows you to accommodate the load capacity of up to 400-500 kg, including the weight of passengers and the engine, although it is not recommended to operate the vessel at the limit of loads.
The material is a multilayer PVC fabric, often having a density of 750 to 900 g / sq.m. Reinforcing cord inside the material is responsible for tensile strength, while the outer layers protect against ultraviolet light and mechanical damage. It is important to note that the quality of the adhesive and the processing of the seams is often a decisive factor in durability, so it is worthwhile to carefully inspect the joints of the cylinders when buying.
⚠️ Warning: When inspecting a new boat, be sure to check the valves for leakage. Often factory marriage manifests itself in the loose fit of the valve petals, which leads to slow air etching.
The bottom can be made in the form of a low-pressure inflatable floor (LDPF) or have a rigid deck of moisture-resistant plywood. The first option provides better sensibility for wave and comfort, the second - a more rigid stroke and the ability to install stationary elements. The model 350 is more often characterized by a combined approach or the use of removable floorboards.
Motor compatibility and driving performance
The trunk part of the boat Kama 350 It is designed to accommodate outboard motors up to 8-10 hp. The tranx is usually reinforced by overlays, but excessive loading can lead to deformation of the aft. The optimal choice for this size is a motor in the range of 5-6 hp, which allows you to reach a speed of about 20-25 km / h with one passenger.
The performance of the flat-bottle is directly dependent on the loading. In quiet water, the vessel behaves confidently, but when going to planing with full loading, the engine power may not be enough. In this case, the absence of a pronounced keel characteristic of more seaworthy models affects. However, for quiet fishing in bays and on rivers with moderate currents, this is quite enough.
When choosing a motor, you should consider not only the power, but also the length of the lower unit. Inflatable boats critically important proper burying propeller to avoid cavitation and damage to cylinders exhaust gases or the propeller itself during maneuvers.
- 🚤 The optimal power of the motor for planing with one person is 5 hp.
- ⚓ The maximum recommended power is 10 hp, requires caution when driving.
- 🌊 At a height of more than 0.5 meters, the comfort of stay decreases due to the hardness of the impacts on the water.
- ⛽ Fuel consumption at cruising speed does not exceed 2-3 liters per hour, which is economical for long-distance exits.
It is also worth mentioning the possibility of using electric motors. Kama 350 thrust of 30-40 lbs (pounds) will be enough for silent movement in the water area, which is highly appreciated by fans of catching a predator on spinning.
Installation and interior equipment
The basic equipment of the model can vary significantly depending on the manufacturer and year of manufacture. Standard kit usually includes the vessel itself, seats (banks), pump, remix and bag-package. However, modern requirements of anglers dictate the need for additional elements such as spinning mounts, sonar holders and anchor ducks.
The seats in the basic version are often simple rigid boards or inflatable pillows. To improve comfort, many owners immediately think about upgrading. Installing soft seats with adjustable position significantly improves ergonomics, especially during long transitions.
When buying a used boat, be sure to check the condition of the bag-pack. A torn bag can lead to the loss of small but important parts, such as a valve key or a plug.
Internal rails are an important element that is not always present in the drain, they allow you to safely move around the sides and securely attach equipment, if your model does not have them, it is recommended to provide for their installation during tuning.
| Element | Basic version | Lux/Tunning version | Comments |
|---|---|---|---|
| Siedenia | Hard banks. | Soft sliders. | Sliders allow you to change position |
| Bottom | PVC/Phanera | Aluminum/NDLD | Affects weight and comfort |
| Firming. | Absent. | Complete set | For sonar, spinning, anchor. |
| Bag. | Tissue | Rubbed | Protection against moisture and dirt |
Tuning and modernization of the Kama 350 boat
tuning Kama 350 It's not just a whim, it's often a necessity to adapt a vessel to a particular fishing task, and one of the most popular things is to install transom wheels, which allows one person to easily move a motorized boat along the shore, which is especially true in the absence of gentle descents.
Another important aspect is cylinder protection: the installation of a shingle beam (crank) along the perimeter of the boat significantly reduces the risk of puncture when mooring to unequipped shores or colliding with floating obstacles.
☑️ Checklist of the first tuning
For night fishing or multi-day expeditions, it is important to install an awning or a full cockpit, which allows you to shelter from rain, wind or the scorching sun. The design of awnings for the Model 350 is usually easy to retrieve and does not require complex installation, based on standard leers or additional arcs.
⚠️ Attention: When installing additional equipment (boxes, tanks), watch the centering of the boat. Shifting the load to the bow or stern can critically impair driving performance and even lead to tipping.
Rules of operation and care of PVC
Boat life Kama 350 The main enemies of PVC are open fire, sharp objects and improper storage. After each release, especially if it was salty or heavily polluted, the vessel must be rinsed with fresh water.
Drying before packaging is a mandatory procedure, even a slight humidity inside a rolled-up boat can lead to mold and an unpleasant odor that is difficult to remove later, and if you can not dry the boat (for example, in the field), it must be turned around and ventilate at home.
Store the product in a straightened or semi-folded form at the temperature recommended by the manufacturer (usually from -20 to +50 degrees, but optimally - room temperature). Prolonged storage in direct sunlight accelerates the aging of the material and can lead to tissue stratification.
- 🧼 Use only specialized PVC cleaning products, avoiding aggressive chemicals and solvents.
- 🔥 It is strictly forbidden to smoke or make a fire near a pumped boat.
- 🔧 Regularly check the pressure in the cylinders with a pressure gauge, especially at temperature changes.
- 🛡️ To protect the bottom from abrasion on rocky beaches, use special protective mats.
Small puncture repairs can be done on your own with a remix, and it is important to degrease the surface and use adhesive compatible with the boat material, strictly following the temperature instructions for gluing.
Comparison with analogues and final conclusions
In its price segment Kama 350 It competes with models such as Flagship, hunter or AquaThe main advantage often lies in the affordable price and simplicity of the design, which makes it easier to repair in the field, but competitors can offer more modern solutions in the form of high-pressure inflatable floor or improved cockpit ergonomics.
The Hidden Problem of Cheap Models
Budget boats often save on the width of the pier, which makes the board more vulnerable to impact. When buying, pay attention to this - a wide bar is not only protection, but also a convenient handle.
Choosing between a new budget model and a premium used boat is worth weighing the risks. kama It will guarantee the absence of hidden defects, but may require investment in tuning.
In conclusion, the Kama 350 is a workhorse for an amateur fisherman, which does not claim to be a sailor's laurels, but does a great job in inland waters, and with proper care and moderate operation, it will last for many years, delighting the owner with successful trophies.
The main conclusion: the Kama 350 is the optimal balance of price and functionality for beginners, requiring minimal investment in basic tuning for maximum comfort.
Frequently Asked Questions (FAQ)
What is the maximum number of people can be carried on a Kama 350 boat?
According to data-sheet figures, the capacity to carry 2-3 people, but in terms of comfort and safety, it is considered optimal to have two adults in the boat, a third passenger will significantly reduce the free space and buoyancy.
Can I put a 350 engine with a capacity of 15 hp on the Kama?
It's not recommended. Tracks and cylinder designs are not designed for this kind of thrust, and this can cause the transom board to collapse, the engine to tear off, or even the aft seams to rupture at a sharp start, a maximum of 10 hp with great care.
How to seal the boat if there is no remaplet at hand?
In an emergency, you can use a piece of PVC from an old boat or even a dense rubber chamber, treating the edges with sandpaper and gluing it to a universal polyurethane glue. However, this is a temporary measure, and full repair using native materials is mandatory at the earliest opportunity.
How often should the boat be reloaded during operation?
The pressure in the cylinders depends on the ambient temperature. When you go out into the sun, the air warms and expands, increasing the pressure, and in cold water it drops. It is recommended to check the pressure with a pressure gauge before each exit and after long periods of parking, adjusting it to normal.