Choosing a reliable swimming aid for fishing or family vacations on the water often leads to the need for detailed analysis of available models. Hunter 320 LCIt's a versatile option for small and medium-sized water bodies, and it's different from the standard versions by having a reinforced keel, which dramatically changes the behavior of the vessel on the wave.
Many water engines are looking for a balance between cost, comfort and driving performance, and it is the keel-structure And when combined with its compact dimensions, it makes this model attractive, and unlike flat-bottomed models, it allows for a more powerful engine, which expands the horizons of use, and let's look at what's behind the LC acronym and why these technical solutions are important to the end user.
Boat hull design Hunter 320 LK It is based on the use of high-strength reinforced materials that can withstand significant mechanical stress. five-layeredIt's a watertight, puncture-resistant system that's critical when you land on rocky shores, and it's an inflatable keel that runs along the entire length of the bottom, and it's very stable, and it can actually cut through the waves at high speeds.
An important feature is the use of aluminum-fibre Unlike plywood or light alloys, aluminum is non-corrosive and has a minimal weight, making it easier to assemble and transport the craft. The connecting elements are made of stainless steel, which guarantees the durability of the attachment units even in an aggressive salty environment.
It is worth noting that the keel in this model is not just a decorative element, but a full-fledged power structure that Increases the useful length of the body over the waterlineThis allows the boat to plane faster and consume less fuel at cruising speed. The cylinders have complex geometry optimized to reduce water drag and increase stability when boarding passengers.
⚠️ Attention: When pumping the keel and cylinders, strictly monitor the pressure gauge readings, since pumping in the sun can lead to rupture of the seams due to air expansion.
To understand the design better, consider the key elements that ensure safety and comfort, and here is a list of the main components to look out for when inspecting:
- 🛡️ PVC reinforced 1100 g/m2 - high-density material with protection from ultraviolet and fuel.
- ⚓ Layer-bar - along the entire perimeter, protects the sides from impacts and facilitates landing on shore.
- 🪵 Aluminum stringers - provide rigidity of the floor and do not rot during prolonged contact with water.
- 🧵 Cast pens - located on the perimeter for easy carrying and mooring, have a reliable fastening.
Overall data and weight specifications are determining factors in the choice of transport for the transport and storage of the boat. Hunter 320 LC It is a compact keel boat, which makes it comfortable for one person, but is also large enough for two or three passengers with full gear, and accurate figures help calculate the vehicle’s carrying capacity and determine whether a trailer will be required to transport it.
The technical parameters of this model allow you to feel confident on the water even in the presence of a small wind. Load capacity It is distributed in such a way as to maintain a buoyancy reserve even when fully loaded with fishing equipment, and it is important to note that the actual weight of the boat when assembled may differ slightly from the passport due to the moisture of materials or equipment.
Below is a table with the main specifications that will help you navigate the capabilities of the vessel:
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 320 cm | Including inflatable parts |
| general width | 146 cm | Maximum cylinder width |
| Diameter of the cylinder | 38 cm | Provides high landing |
| Load capacity | 440 kg | Including crew and engine weight |
| Boat weight (bottom) | 46 kg | Without motor and equipment |
When selecting a power unit for Hunter 320 LK Not only the power, but also the type of lower unit, as well as the weight of the engine. the manufacturer recommends using engines with a capacity of up to 9.9 hp, but in practice, many owners install engines up to 15 hp, getting excellent speed specifications. transom plate made of moisture-resistant plywood with reinforcement and covered with a protective composition that withstands vibration loads.
The best choice for this model is lightweight two-stroke engines of Japanese or Chinese production, which allow you to quickly bring the boat to plane with one or two passengers. Four-stroke analogues will be heavier, which can adversely affect differentiation and handling, especially on a quiet run.
For those who prefer a quiet movement, electric motors with thrust up to 55 pounds will be suitable, which will allow you to move silently around the water without scaring the fish.
☑️ Checking before getting on the water
It takes a little bit of time to build and prepare the boat for operation, if you know the sequence of actions and have a suitable pump. Primary pumping takes time to straighten the folds of the material, so take your time and immediately give maximum pressure. It is recommended to first pump the cylinders to 70-80% of the norm, let the material get used to for 10-15 minutes, and only then finish to work.
Installing aluminum stringers in the grooves of the inflatable floor is a process that requires care, especially at low temperatures when the material becomes stiffer. Connecting bushings Stringers must enter the grooves without undue effort, so as not to damage the internal structure of the floor. After installing all the elements, the final pumping of the keel is performed, which straightens the bottom and gives the boat the final shape.
To speed up the assembly process, experienced users recommend using foot-driven pumps or battery models, since manual pumping of a large volume takes a lot of effort and time. When assembled in the cold season, it is better to bring the boat into a warm room for several hours before getting on the water, so that the material becomes elastic.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight unattended, as the pressure inside the cylinders may exceed the permissible limits.
How to keep a boat in the winter?
The boat should be thoroughly washed, dried and folded in a spacious bag. It is better to store it in a straightened form or in a semi-assembled state at a temperature of not less than -10 ° C to avoid PVC clogs of material. Before long storage, it is recommended to treat the seams with a special composition to prevent drying out.
Performance Hunter 320 LC The keel structure allows you to confidently navigate open areas of water, where flat-bottomed boats begin to prowl dangerously, but like any vessel of this class, it has its own behaviors that must be considered when driving.
In planing, the boat behaves predictably, but requires careful distribution of cargo. Shifting passengers or cargo on one side can lead to a roll that will have to be compensated by shifting the steering wheel or gas discharge. Course stability significantly higher than that of analogues without a keel, which reduces driver fatigue during long transitions.
The maneuverability of the vessel is estimated as average: the turning radius is large enough to plan the trajectory in narrowness in advance. When moving against the wind, the boat has good sailing due to high cylinders, so in stormy weather you need constant steering or the use of a cat anchor.
To increase comfort during long fishing, install an inflatable seat with a hard back or use a removable soft coating on a hard floor slate.
The issues of maintenance and durability of materials are always relevant for owners of inflatable floating vehicles. PVCmodel HunterResistant to gasoline, oil and solar ultraviolet, but requires proper care, regular washing with fresh water after use in salt water or contaminated water bodies will prolong the life of valves and seams.
The boat's repairability is high: the kit usually comes with a repair kit with a piece of material and glue, which allows you to eliminate small punctures directly on site. For more serious damage, such as cuts of stringers or damage to seams, it is better to contact a specialized service where the tightness of the connection is garanted.
The life of the product depends on the storage conditions and frequency of use. When operated carefully and stored in a dry room, the boat can last for more than 10 years, maintaining its technical specifications. cross-plate and, if necessary, update the protective coating to prevent plywood from being dissected.
Proper drying and storage away from direct sunlight is the key to the long service of PVC materials and maintaining the elasticity of the seams.
What is the real speed of the boat Hunter 320 LK with an engine of 9.9 hp?
With one adult passenger and a minimum load, the speed can reach 25-28 km / h. At full load (two people plus equipment), the speed is reduced to 18-22 km / h depending on the state of the water and wind.
Can this boat be used for rafting on rocky rivers?
Yes, you can, thanks to reinforced PVC reinforced and protective timber, but it is recommended to be careful when passing through shallow water and carry a remix to quickly eliminate possible damage.
Do I need to register Hunter 320 LK boat in GIMS?
The weight of the curb boat is about 46 kg, which together with the engine (less than 80 kg) gives a total weight of less than 200 kg. According to the current rules of the Russian Federation, such vessels are not subject to mandatory registration if the engine power does not exceed 10 hp (8 kW).
What pressure should be in the keel and cylinders?
The operating pressure in cylinders is usually 0.25-0.28 atm (250-280 mbar), and in the keel - up to 0.35 atm (350 mbar) to ensure structural rigidity.